Xecuter CoolRunner: New Nand-X Addon for Reset Glitch Hack

Due to the new reset glitch hack announced this weekend by GliGli and Tiros, we are happy to announce a new add-on for the NAND-X Kit that is based on the Xilinx CoolRunner-II CPLD. This simple addon has been designed to work out of the box with the Zephyr, Jasper and Trinity(Slim) motherboards – and can also be updated for any future code changes / motherboard revisions. Simply connect the included Phat or Slim adapter to the Xecuter CoolRunner and away you go. Easily dump your nand with the Xecuter NAND-X and then install the Xecuter CoolRunner to get instant access to homebrew and beyond ! Easy install for anyone who can solder. The Slim is 7 wires and the Phat is 6 wires. Production has started so you should expect these to be in stores within the next couple of weeks. The price will be no more than $20 ! – Many thanks to GliGli, Tiros and Coz for their efforts in opening up a new chapter of homebrew for the...
Read More of Xecuter CoolRunner: New Nand-X Addon for Reset Glitch Hack

MOLEXT – Official Review + $5 Off Coupon Inside !!

Thanks to XCONSOLES for providing this Been using mine all week – works REALLY well. The batteries do drain quite a bit faster when using eject (12v) however I don't have to use eject that much so its no biggy. Most flashing operations these days use 5v. I also used a cigarette lighter pass thru dc adapter and works great in the car flashing (no need to take the batteries out either like it suggests on the packaging). Always worth keeping a spare set of batteries to hand. Only negative is that there is no recharge circuit but you can always have your own recharger to hand they are cheap enough (even tho the amps will be less with a rechargeable battery). I use Procell batteries and bought them from xconsoles – very cheap and are made by Duracell so last quite well. The switches are perhaps labeled a little ambiguously but once you know what they do its easy enough. Operation with 2 x 9V batteries loaded: – Power ON: SWITCH to BAT. – Power OFF: SWITCH to AUX – Battery power detected: (Green: good, Orange: middle power, Red: Low power) (1) Battery icon switch to ON: Power level detect enabled and 2 LED beside battery will be shown on. (2) Battery icon switch to OFF: Power level detect function off (saves battery life) Operation with AUX power (Car power adapter) – Power ON: switch SWITCH to AUX – Power OFF: switch SWITCH to BAT. The LED on molex port is telling ppl the power of the port is ON or OFF at that time. Green LED is Battery – Blue LED is AUX pass-thru power. Total Power OFF would be AUX Switch to ON and Battery Level switch to OFF (Should be no LED's at all) PROS: + Works exactly as advertised. + High quality design and...
Read More of MOLEXT – Official Review + $5 Off Coupon Inside !!

ECC Glitch Generator v1.0

BestPig released a new utility for the new homebrew Xbox 360 reset glitch hack to easily generate an ECC file: This new 'reset glitch hack' hack requires the creation of a ECC file based on a dump of your NAND. The official script is written in python, so I wrote a little GUI to make life easier for you 😉 No need to install python, ECC Glitch Generator is stand-alone and doesn't need any other software to operate. Official Site/Download: bestpig.fr (the software has English...
Read More of ECC Glitch Generator v1.0

XeLL Reloaded 28/08/2011 '2Stages'

Cancerous, cOz, Ced2911, GliGli, RedLine99 and Tuxuser are proud to release today the first official version of XeLL-Reloaded (Codename: 2Stages) following the release of the new homebrew Xbox 360 reset glitch hack: * Its divided in 2 stages: – 1st Stage initalizes the Hardware, uncompresses and executes 2nd Stage – 2nd Stage (based on LibXenon) loads all required drivers and does the usual "XeLL tasks" * XeLL is based on LibXenon now * XeLL is running with all CPU cores activated * Optimized CPU Usage * TinyEHCI is used, delivers full USB 2.0 speed when acccessing mass storage media * lwip network stack upgraded to v1.4 rc2 – It's faster * It can access the DVD-drive via DMA now: faster reading * It's possible to reload into XeLL now when you are inside a LibXenon Application * Refactored ELF Launching Code – shouldn't have issues when executed via XeLL-Launch * New HTTP Webinterface * Proper hardware init / shutdown (e.g. after XeLL Launch) * Supports upgrading XeLL with a XeLL-2Stages binary from USB, named "updxell.bin" * Infinite bootloop when looking for ELFs to execute * Parses / decrypts keyvault (either with real or virtual CPUkey) For now, there is still a little work to do on the nandflasher so this feature is disabled and a update will comes in the following weeks. If you have a Jtag console, you can update XeLL with tuxuser's apps : XeLL Updater or LxNANDFlasher (Use at your own risks). Official Site/Download:...
Read More of XeLL Reloaded 28/08/2011 '2Stages'

Reset Glitch Hack – "JTAG" Type Exploit Zephyr/Jasper/Trinity(Slims) !!!

Finally, a method of exploit (like the previous JTAG) has been found to work on all non-Xenon/Falcon consoles (yes….running unsigned code on Slim consoles and all dashboard versions on HDMI PHAT consoles !!!) Update: Regarding Falcon, GliGli says…. Falcons should work, tho they will need their own glitch timing (this also needs a proper explanation, but not today), couldn't do it because I didn't own one.. This also means you will be able to run all the nice stuff like games from HDD (sucks for xK3y and Wasabi – looks like they wont be needed soon) For full info, video and technical details visit this forum thread: http://www.team-xecuter.com/forums/showthread.php?t=69670 Full Guides / Files / Source Code / Instructions / Diagrams: http://tinyurl.com/resetglitch Full Credits & Thanks goes to GliGli &...
Read More of Reset Glitch Hack –

XePatch v1.0.0.122

EatonZ released XePatch – a complete free/open-source patch editor that will let you edit compiled patches and compile new ones with ease. Features * Easy to navigate GUI. * A full compiled patch editor. It allows you to edit the existing patches, add new patches, and delete existing patches. * Supports v1 and v2 DashLaunch patches. * Supports FreeBoot patches, as well as all patch slots. * Validation features on all text fields to ensure that you do not input any invalid data or addresses. * A simple patch source editor. Complete with a compiler thanks to the Xenon PPC assembly compilers (made by ?). Future * There are no future versions of XePatch planned outside of bug fixes. Full decompiling may be looked into in the future, but it doesn't seem possible. Requirements * The FULL version of .NET Framework v4.0. Download * An up to date computer; visit Windows Update. Official Site/Download:...
Read More of XePatch v1.0.0.122

Jtag Tool v3.50

Coolshrimp released a new version of Jtag Tool – an all-in-one GUI installer to create and put the latest freeBOOT fbBuild on your jtag'able 360 via USB/LTP. What's new/fixed: * New Dash Support(13599) * Added New Dash (MS Update Files) Official Site:...
Read More of Jtag Tool v3.50

C4E's iXtreme LT+ 1.91 FULL Firmware Pack

C4E released the iXtreme LT+ v1.91 CFW in association with Team Jungle & Team Xecuter: You should have the latest dashboard (2.0.3599.0) if you are using these firmware versions. Of course if you are updating then you should revert to stock first. Remember that 9504/0272 drives become locked when you update to the latest dashboard so you require a Sputnik Switch or Probe (MXIC) or the Winbond Kamikaze hack if you want to flash your drives. Naturally you can also use the Xecuter DG-16D4S Unlocked PCB and the Xecuter Unlocked Pro Kit also. Official release of the iXtreme LT+ v1.91 -Lite-on Slim 0272, 0225, 0225u, 0401 -Lite-on Phat 02510C -Benq 04421C -Hitachi 78/79 * New random AP26 challenges defeated. Due to the new AP26 random challenges the safety freeze for unknown or bad AP25 data is no longer supported. Please ensure your AP25 data is correct for the dashboard version you are using. * No need to reburn current AP25 backups from dashboard 13146 I would like to dedicate this fw to all the dead DG-16D4S drives from the kamikaze hack Thanks go to Team Jungle for their hard work and efforts in the development process. Thanks also go to Team Xecuter for their support to this project. Official Site: C4Eva, jungleflasher.net, team-xecuter.com Download: In the usual places (and don't ask where that is...
Read More of C4E's iXtreme LT+ 1.91 FULL Firmware Pack

JungleFlasher v0.1.86 (267)

As always with a new C4E iXtreme release, Team Jungle also comes with a new version of JungleFlasher to add full support for the new firmwares. What's new/fixed: * Support for LT Plus 1.91 -Lite-on Slim 0272, 0225, 0225u, 0401 -Lite-on Phat 02510C -Benq 04421C -Hitachi 78/79 * Bug fix for non USB MTK routines: Read, Write, Phatkey etc…. * Support for Sputnik360 MXIC unlock methods. This will also work with the Winbond Kamikaze Drill hack Official Site: http://www.jungleflasher.net Download:...
Read More of JungleFlasher v0.1.86 (267)

Easy FreeBoot v5.33

Sneakypeanut released a new version of his Easy freeBOOT – an application which will automate the creation of a freeBOOT image for JTAG-able consoles based on the original NAND image. What's new/fixed: * SMC Config editor * added more donor files * fixed jasperyness * Ability to change donor file region * Ability to bring cpukey dialog up * New IO ( no more packet io virus warnings ) thanks Stoker25 Official Site: n/a, by Sneakypeanut Download: n/a (might be illegal under...
Read More of Easy FreeBoot v5.33

FreeBOOT Toolbox 0.04 Maker v2.7.2

BestPig released a new version of freeBOOT ToolBox – a tool that allows to create and customize a freeBOOT image based on an original or XBR/freeBOOT dump. What's new/fixed:* Added support for the 13599 kernel thanks to fbBuild 0.32* Removed hashcheck (WARNING! this is experimental, try it ONLY if you have a JTAG cable) Official Site: http://www.bestpig.fr (the interface is also available in English)Download: n/a (might be illegal under...
Read More of FreeBOOT Toolbox 0.04 Maker v2.7.2