TX Fusion Update

Do not mistake our silence as no progress on the Fusion project. Things are progressing nicely and we have seen major advancements in the roadmap. Here's a little teaser, a piece of software that will become pretty famous in the coming months. Note that this is an internal demo screenshot – the end...
Read More of TX Fusion Update

Xecuter Project Update – Demon, RGH2 etc

We figured we'd give you an update on the Demon as it has been going on for some time now. Rest assured that our dev team along with several prominent members of the linux / homebrew community have been hard at work on this project to make sure that you get the best product possible that has been tested in...
Read More of Xecuter Project Update – Demon, RGH2 etc

XNand Healer GUI v0.77

TingedAce released a new version of XNand Healer GUI – a GUI app to help you dump and manage NAND files, remap bad blocks and also uncripple your Xbox 360. What's new/fixed: - Supports Multibuilder 09x that uses build.exe instead of python script - Includes legacy support for Multibuilder 08x -...
Read More of XNand Healer GUI v0.77

Xebuild GUI v2.04 and Diskswap Configurator v2.0

Swizzy released a new version of his GUI for xeBuild and Diskswap Configurator 2.0! What's new/fixed (Xebuild GUI v2.04): - Fixed: Now properly using new xell-reloaded, my mind apparently lied to me and said i had swapped the files in the perm directory, but i apparently only did it in the temporary...
Read More of Xebuild GUI v2.04 and Diskswap Configurator v2.0

AutoGG v0.3

blaKCat released AutoGG v0.3: The AutogGG is a program that helps you to: - Read the Nand of the Xbox. Autodetect the model. - Generate Nand to load Xell in console to obtain Cpukey. - Once you have CpuKey.Generate Jtag / rgh (Glitch) / Retail, images - Flash generated Nand through programmer (LPT/USB) or...
Read More of AutoGG v0.3

360 Multi Builder v0.93

Rogero released a new version of 360 Multi Builder – an easy to use GUI to help everyone make their Jtag / ECC / Reset Glitch Hack images What's new/fixed (since v0.91): - Added a window installer package for easier and automated installation/removal. - Updated the Menus to a better and easier to use...
Read More of 360 Multi Builder v0.93

10 Year Anniversary Interview

My old fiend Bald Bouncer asked if I'd give an interview to mark our 10th Anniversary as Team Xecuter. I was happy to oblige Check it out at his games news site...
Read More of 10 Year Anniversary Interview

360 Multi Builder v0.90

Rogero released a new version of 360 Multi Builder – an easy to use script to help everyone make their Jtag / ECC / Reset Glitch Hack images What's new/fixed: Added Xenon support for both Xell/ECC and RGH builds. (Credits to Team Xecuter) Added Jasper 16MB small Block support (config 01198010) to...
Read More of 360 Multi Builder v0.90

XNand Healer GUI v0.76

TingedAce released a new version of XNand Healer GUI – a GUI app to help you dump and manage NAND files, remap bad blocks and also uncripple your Xbox 360. What's new/fixed: Support for 14717 / 14719 building Support for Multibuilder 0.8x (14717/14719 and dashlaunch 2.32) Support for CB 9230 for slims...
Read More of XNand Healer GUI v0.76

Xecuter Xenon RGH Hack – Build.py Script

Here is the build.py for Xecuter's Xenon RGH Hack J-Runner has no use for build.py as it doesn't use Python (or Nandpro) but figured there would be some guys out there who still use this method. Thanks to: RF1911 for the XENON SMC GliGli & Tiros for the original build.py cOz for the Universal patch To...
Read More of Xecuter Xenon RGH Hack – Build.py Script

Team Xecuter's Xenon Reset Glitch Hack

We are happy to finally release the Xenon RGH Hack. This is by no means meant to be used for an everyday RGH as its as bad if not worse than a Zephyr, however it does work and will be perfect for those who have a Xenon where they lost their DVD key or an unbanned key vault. Here is the readme included with...
Read More of Team Xecuter's Xenon Reset Glitch Hack

360 Multi Builder v0.83

Rogero released a new version of 360 Multi Builder – an easy to use GUI to help everyone make their Jtag / ECC / Reset Glitch Hack images What's new/fixed: * Added Support for building ECC image for Slim/Trinity updated to Dash 14717/14719 (CB9230) * Updated DashLaunch to latest version 2.32 (Respect...
Read More of 360 Multi Builder v0.83

J-Runner Build 265 *Includes 14719 Slim RGH*

If you have the 14717/14719 dash update on your slim and you were not able to dump your CPU KEY – you can now use the new J-Runner is released which includes the latest patches for 14719. The new build is 265 – so update now! Also includes latest Dashboard with cOz's fakelive patch and the...
Read More of J-Runner Build 265 *Includes 14719 Slim RGH*

Dash Launch v2.32

cOz released a new version of Dash Launch build for XDK-homebrew RGH/JTAG 360s. What's new/fixed: * fixed glitch jasper big block patch installer * reworked contpatch yet again, should perform equal to xm360 now (thanks node21!) -new patch only operates on containers of type 000D0000 (XBLA) and 00000002...
Read More of Dash Launch v2.32

Xebuild GUI v2.02

Swizzy released a new version of his GUI for xeBuild. What's new/fixed: - Fixed: You can now choose to change your CFLDV and use the nofcrt.bin check patch at the same time… (there was a typo previously) - Added: Argument/Parameter editor to keep such errors as this from happening again (NOTE: Limited...
Read More of Xebuild GUI v2.02

Xecuter Fusion is Coming…..

This year we are celebrating our 10th Anniversary and the team thinks it's about time we got back into doing what we became famous for in the first place. Enjoy this small preview……....
Read More of Xecuter Fusion is Coming…..

AutoGG 0.2.9g

blaKCat released AutoGG 0.2.9g adding new support for the latest version of xeBuild (for the new dashboard) and Dash Launch. The AutogGG is a program that helps you to: - Added dash 14719. - Added DashLaunch 2.31 - Added French translation Official Site/Download: elotrolado.net...
Read More of AutoGG 0.2.9g

360 Multi Builder v0.82

Rogero released a new version of 360 Multi Builder – an easy to use GUI to help everyone make their Jtag / ECC / Reset Glitch Hack images What's new/fixed (since v0.80): - Added Support for building images of latest Dash ver 2.0.14719 - Updated Dashlaunch to latest version 2.31 - Added the updated...
Read More of 360 Multi Builder v0.82

xeBuild GUI v2.01

Swizzy released a new version of his GUI for xeBuild, adding support for the new version and more … What's new/fixed: - Fixed: Updated the hardcoded MD5 hashes for critical files that were included at release, forgot to update those prior to 2.0 FINAL release :$ - Updated: Dashfiles.xml now also...
Read More of xeBuild GUI v2.01

Dash Launch v2.31

cOz released a new version of Dash Launch build for XDK-homebrew RGH/JTAG 360s. What's new/fixed: * revert contpatch to older form * signnotice now defaults to FALSE/disabled * signnotice option should no longer wind up in network troubleshooter on 14717+ * add 14719 Official Site: n/a, by cOz Download: n/a...
Read More of Dash Launch v2.31

Download mp3