Xecuter Defeats Corona !

As promised we have defeated Corona. Full decrypted bootchain achieved and CPU key retrieved. Xecuter does it again – 10 years and still rockin'. Greets to the haters. More news soon – here's some screen shots of the NAND Dump – the box is still live so a few portions of info were blocked. However if you doubt this is real you should go to the back of the noob...
Read More of Xecuter Defeats Corona !

Xecuter RGH2.0 – Jasper Fix Release

Team Xecuter RGH2.0 For CoolRunner Rev A and B (JASPER FIX RELEASE) There were certain Jasper configurations that would boot Xell but not boot to dash. We found that our XEBUILD patches were not quite correct.Apologies for taking so long to fix the issue – this pack should work fine. Please report any problems to the usual places. http://www.qfpost.com/file/d?g=QmzHtE2IU UPDATE 04/29/12: There is a typo in the build.py which stops Xell booting on some refurbed Jaspers Here is the correct build.py – just replace with the one in the RGH2.0 Jasper Fix release pack...
Read More of Xecuter RGH2.0 – Jasper Fix Release

Xecuter J-R Programmer *NOW SHIPPING*

The new Xecuter J-R programmer has been created to cater to the budget conscious and coded to work hand in hand with the latest version of the J-Runner app. A third of the size of the Xecuter NAND-X and optimized to run faster than any other USB-SPI based tool (Example Speeds: Others average 16M read 7m 20s, JRP average 16M read 5mins 40 secs), this nifty tool can fully read/write NAND over SPI and can also program the Xilinx CoolRunner Dev Boards over USB ! Complete with a CoolRunner JTAG cable so you simply plug 'n program without any soldering using the latest J-Runner App (needs to be at least Build 268). Also comes with NAND installation wires that have the connectors that are compatible with the NAND-X QSB boards. If you don't use the QSB's you can simply cut off the connectors and do a normal wires only install. The J-R programmer is also fully upgradeable and can be programmed using the Xecuter X360USB PRO Update app. Onboard LED's indicate Power and Bootloader Mode . RED LED: Bootloader Mode (Switch to the left) GREEN LED: J-R Programmer Mode (Switch to the right) Features: Fast NAND Programming Fast XILINX CoolRunner JTAG Programming Compatible with both Phat and Slim Onboard LED's indicate Power & Data Easy Install System Compatible with All NAND-X QSB's Includes Cable For QSB or Wires Install (QSB Sold Separately) Includes Cable For Xilinx CoolRunner JTAG Includes KIOSK option for Remote Reset Built-in Programmer For Future Firmware Upgrades Designed for the latest J-Runner App (Build 270+) Rock Solid Design – Tested by the J-Runner Team Supports New CoolRunner/NAND-X QSB Kits (Solder Separately) Affordable – We Provide You With More For Less ! High Quality & Trusted Xecuter Design What's In The Kit: J-R Programmer NAND Cable Set (Can fit to optional QSB or cut use as wires...
Read More of Xecuter J-R Programmer *NOW SHIPPING*

J-Runner v0.2 Beta (Build 269)

A new version of the hugely popular J-Runner app has been release Changelog: Build 269 fixed incompatibility error on XP Build 268 Layout change added RGH2 support for 14717 > phats added RGH2 Wiring images added RGH2 xsvf files added ARM 2 support added Xecuter J-R Programmer support added LPT support (for coolrunner programming only) added Xebuild options editing screen added sounds on Success and Failure conditions (editable) added Xell-Reloaded on JTAG – for HDMI support during CPU key retrieval etc added bad blocks tab for full check of bad blocks added .dll usage added support for updating jtags of any wiring (creating aud_clamp, Open_tray updated images etc) added new icon added reporting console LDV in log during Cpu Key grab over network removed Xellous use on JTAG improved update method improved advanced nand/CR functions improved changelog retrieval some minor bug fixes EDITED: Build 268 had a incompatibility error with XP – 269 has resolved this Download...
Read More of J-Runner v0.2 Beta (Build 269)

Xecuter X360USB PRO V2 Now In Production !

After months of development and thousands of test hours, two worlds collide with the much-anticipated and long-awaited X360USB PRO v2! BEST OF BOTH WORLDS The X360USB PRO was the world’s first SATA to USB Mass Storage controller that not only enabled WINAPI over USB, but also PORTIO. Xecuter has taken the design one step further by integrating all of the functions of the hugely successful CK3i! This powerful all-in-one tool is the result of an intense design collaboration between Team Xecuter and Team Jungle. The X360USB PRO v2 is the most advanced WINAPI/PORTIO to USB adapter & 360 Connectivity Tool ever created. One stand-out feature is that you are now able to connect all 360 DVD Drives and 360 Hard Drives to any PC or Laptop simply by connecting to a USB port, and when used with Jungle Flasher all of the DVD Drive’s Power and flashing capabilities are included and also with the option of complete automation. No more struggling with specific SATA chipsets or issues with awkward operating system setups or any strange power or eject timing issues for vendor mode, not to mention so much faster and more noob-friendly than anything else on the market. Now tasks such as repairing your Xbox 360 DVD Drive’s firmware or upgrading your broken DVD Drive to a new one without the expensive fees charged by the manufacturer just got easier than ever before. Whether you are a beginner or advanced user, this multi-use Mass Storage controller is an essential addition to any toolkit. You can even connect your 360 Hard Drive to get full access to your files, or even connect any Western Digital Hard Drive and convert it to be 360-compatible using the X360USB PRO HDD Hacker tool – no other device can do this in Windows! The layout of the entire circuit has also been completely redesigned...
Read More of Xecuter X360USB PRO V2 Now In Production !

Xecuter RGH2.0 JED Files & Other Updates

Here are the JED and XSVF files for the Xecuter RGH2.0 Release – http://www.qfpost.com/file/d?g=22gaEK4p6 A few questions were raised that we should clarify. If you are on 14699 or below with no DVD Drive and no Drive Key you can still use original RGH to get your CPU Key if you are on CB 6750 If you are on 14699 or below with no DVD Drive and no Drive Key you can still use the Xecuter RGH2.0 to get your CPU Key if you are on CB 5772/6752 If you are on 14717 or above with no DVD Drive and no Drive Key you can still use the Xecuter RGH2.0 to get your CPU Key if you are on CB 6752/6753 Simply use our RGH2.0 builder and the TX CoolRunner instructions and you will be able to run Xell and get your CPU/DVD Key. The fact is we do not use the XOR hack on 5772/6752 – we use the rc4/keystream trick so no XOR hack at all is required or used below 14717. Of course we can give you this info as it's our code in the first place. Funny how that works…… We appreciate any feedback and results from your own tests. All input is welcome. Also thanks to Juvenal in #libxenon for pointing out some linux corrections in the build.py <@Juvenal>your build.py from rgh2.0 does not work on linux because of the way you did paths :/ <@Juvenal> instead of using double backslashes for path delims you should do: os.path.join('common', 'CB', 'file.bin') <@Juvenal> that will make it platform independent Here is our updated RGH2.0 build.py script for Xell to make it cross platform compatible:...
Read More of Xecuter RGH2.0 JED Files & Other Updates

Xecuter RGH2.0 Official Release

Team Xecuter RGH2.0 For CoolRunner Rev A and B We were not quite ready to release this due to it's unstable boot times on older glitch hardware, but as our code was leaked from a team member AGAIN we had to release this due to another team stealing the code and claiming as their own work. They were even too lazy to change any of the patches to make it look like their own – they are 1:1 same as our original sources. Super lame. It seems some teams think this is the Wii or PlayStation scene and you can act like this. They don't even give credits to cOz for his SMC patcher – because they didn't even know that code was from him of course. We don't want to get dragged down into bullshit scene politics – most of you won't care anyway, but a lot of guys work very hard on this stuff only to have it stolen with no effort and no credits is just sad. Anyway…… The Xecuter RGH Development Team are pleased to announce the official release of the RGH2.0 hack for all CoolRunner Rev A and Rev B dev boards. All Phat consoles have now been defeated and are totally glitch-able without having a previous NAND dump or CPU KEY (the same applies to Slim Trinity that have been updated to 14717/14719). We have included all of the build.py and xebuild scripts for your convenience. Please give the correct credits if you use our work. Xecuter RGH2.0 Features introduced: Hack now works on new CB's (14717/14719 update) Hack now works with all Refurbished Split CB's (4577, 5772, 6752) Zephyr CB 4578, 4575, 4577 Falcon/Opus CB 5771, 5772, 5773 Jasper CB 6750, 6752, 6753 Trinity (Slim) CB 9188, 9230 To confirm, we can now glitch Phats with any kernel and any bootloader. As...
Read More of Xecuter RGH2.0 Official Release