Xecuter CR3 PRO v1.0S FULL POST On Sale Now

It's been 9 months in the making (no thanks to several motherboard/dashboard revisions during our development time), and now after an exhaustive test run, the CR3 Pro is ready for public consumption. This is aimed at users who demand the highest RGH performance possible and the ability to tune their settings to an extreme level. The CR3 Pro is not for beginners, modders looking for cheap and cheerful solutions or anyone who is happy with slow, unreliable glitching. The first release of CR3 Pro is designed for slims with FULL POST only (Trinity, Corona v1 & Corona v2). As Corona v3 and v4 had FULL POST removed there will have to be a different version of CR3 PRO for those models using FAKE POST. This is being tested right now and will be released soon. We have put together two packages. The CR3 Pro Kit which covers the basics (mainly for those who already own the QSB's and JR Programmer v2 etc) and the CR3 Pro Ultimate 19pc Kit which includes absolutely everything that you need to do a complete high performance install. Xecuter CR3 Pro v1.0S FULL POST Features: Brand new design – totally new RGH code Next Generation RGH Tool – The highest performing RGH device on the market Full POST Slim version supports Trinity, Corona v1 and Corona v2 Full POST monitoring and tuning via the New CR3 Pro RATER Feature – fine tune your boot times to PERFECTO! (Requires JR Programmer v2) Multiple pulse settings via DIP Switches Multiple Ceramic Cap options (7pc kit included 10pf, 22pf, 30pf, 47pf, 68pf, 82pf and 100pf) New Built In ROL Option (Show Debug LED On Front Panel Ring Of Light) Built-in Ribbon Cable Connector For DemoN (Includes CR_EN and XSVF Programming – no soldering or wires) Quality Assured – No Cheap Chinese Knocks-Offs Optimized timing for each motherboard...
Read More of Xecuter CR3 PRO v1.0S FULL POST On Sale Now

Xecuter Sonus 360 (Phat) On Sale Now

The Xecuter Sonus 360 (Phat) essentially allows you to program a different sound for power on, power off, eject and even rgh glitch to your Xbox 360 Phat – No longer is this cool feature restricted to just Xbox 360S Limited Edition Consoles – yet another groundbreaking first from Team Xecuter! No JTAG or RGH hacking is required for this very fun mod, you can either use one of the current stock sounds that are included in the Limited Edition Xbox 360S consoles (Default Xbox, Gears of War 3, Modern Warfare 3, Star Wars, Halo Reach and Halo 4) or use one of your own customs sounds! The Sonus 360 (Phat) module is easy to solder to your Phat console board and you simply hook it up to your JR Programmer and program which sounds you required using the Sonus 360 Sound Editor. Note: An Xecuter JR Programmer is required to program the sounds to the Sonus 360 (Phat). Check out a screen shot of the new version Xecuter Sonus 360 Sound Editor which is included in the latest J-Runner ! Features: Custom Xbox 360 (Phat) Startup Sound Custom Xbox 360 (Phat) Shutdown Sound Custom Xbox 360 (Phat) Eject Sound Custom Xbox 360 (Phat) Glitch Sound Use all Xbox 360S Limited Edition Console sounds Use your own custom sounds !! Easy to install only 5 wires (Included) Easy to program using an Xecuter JR Programmer (Sold Separately) Easy to use Sonus 360 Sound Editor software Programming cable included with the JR Programmer Includes same high quality speaker as the Xbox 360S limited Edition consoles Uses same chipset and protocol as the Xbox 360S Limited Edition consoles Rock Solid Design – Extensive testing by the Xecuter & J-Runner Teams Affordable – We Provide You With More For Less ! High Quality & Trusted Xecuter Design What's In The Kit: Xecuter...
Read More of Xecuter Sonus 360 (Phat) On Sale Now

Xecuter Liteon DG-16D5S Replacement LTU PCB On Sale Now

Do you have a faulty Liteon DG-16D5S or Hitachi DLN10N DVD in your Xbox 360? Are you swapping your drive to another console and are unable to program your firmware due to write protection being enabled? Yet again Xecuter have made the previously impossible, possible. Fits all Liteon DG-16D5S Drives Can run all latest firmware versions for Liteon DG-16D4S, Liteon DG-16D5S and Hitachi DLN10N Easily programmable using the X360USB PRO V1 or V2 (Update to the latest firmware v20.1) Requires the latest Jungle Flasher 0.1.94(320) & J-Runner 0.2.286 C4E's new LTU (LT Ultimate) firmware now allows booting of any Liteon or Hitachi based system without any previous firmware dump (inc the DG-16D4S and DG-16D5s 1175/1532 and Hitachi 0500/0502 firmwares) – all you need is the DVD Key and FCRT.bin which can be extracted using RGH or DGX if it's a newer version. Includes solderless quick install adapter Includes heatsink for drive controller IC Remember that there may be fake LTU PCB out there – it goes without saying that they are cheap garbage and you should stay away. Every official Xecuter product has a serial code – you should claim ownership of the code at serial.xecuter.com On sale now at most Official Resellers for only $69.95 NOTE: A small number of the first batch had green as the PCB color. If you have a green version and are worried that it's fake simply check the serial...
Read More of Xecuter Liteon DG-16D5S Replacement LTU PCB On Sale Now

DGX v1.1S On Sale Now !

After the phenomenal success of our DGX product, we listened to a great deal of feedback from our loyal userbase and have implimented some changes to the design to make the DGX perform even better than before – especially for Trinity boards. DGX V1.1S change log: Added 70cm 24WG POST_OUT Wire Added a ceramic cap option (Point C29) between D and GND (same as CR3 Pro) – included an optional 10pf ceramic cap Added a selectable 5ohm and 10ohm resistor to post_out (simple solder jumpers 1 Closed: 10ohm, 2 Closed: 5ohm, 3 Closed: 0ohm Default) Added a a grounded IPEX socket (Point J1) for CPU_RST (10cm IPEX cable included) Larger solder pads and stronger vias (C D E F 5v GND) Removed JTAG pin header (Programming is not required – some users tried to program their DGX and damaged it) Optimized code for enhanced Trinity performance. DGX 1.1 would boot the worst Trinity we had in 30 seconds (v1.0 booted in 2 minutes) My preferred settings for Trinity were: D: 10cm IPEX to R4D4, C: 70cm 24AWG Wire , 10pf Cap Installed, 0ohm (Default) My preferred settings for Corona were: D: 10cm IPEX to C5R11, C: Default wire, No Cap Installed, 10ohm Remember that there may be fake DGX out there – it goes without saying that they are cheap garbage and you should stay away. Every official Xecuter product has a serial code – you should claim ownership of the code at serial.xecuter.com On sale now at most Official Resellers for only...
Read More of DGX v1.1S On Sale Now !