CK3 Probe v2 First Batch Available & New LT Switch v1.5

As previously announced the CK3 Probe v2 shipment was on hold due to the delay on the custom made conductive glue shipment. Due to the quantity it was not allowed to be flown on a airplane so had to be transported by ship (which has caused an 8 week delay). However we have been inundated with requests to release a batch of the stock without the glue as many of you are simply prepared just to do the trace repairs yourselves. Naturally we have instructed the resellers who are selling without the glue to give a discount and to make sure that you are made aware that the glue is not included. It is on its way so if you are desperate for the no-solder solution then you'll have to wait a couple more weeks.

The good news is that while we were waiting for the glue we had time to add a new feature called MULTI-R which is also a new feature that we have added to an upgraded version of the ridiculously popular LT Switch.

With the help of TeaJunkie on our forums who has become somewhat of a go-to guy for repairing Liteon PCB's that some of you had butchered in a frenzy of solder-hate, we discovered a very small number of DVD drives that simply would not switch to vendor mode. Now before a thousand of you who couldn't get 0×72 vendor mode start waving your hands, the number of returned drives with this error was 2 out of 63 drives. The majority of the time it was user error. However even if there is a small chance of an issue, we had to find a solution and implement it. After input from other experienced members and various articles on the same problem, we found that the LT Switch default resistor level of 20 Ohms could sometimes be too much or not enough for a small number of DVD drives (we found that the majority of drives that ever showed this issue were the Liteon 93450). So our solution once again lends itself to the process of K.I.S.S (KEEP IT SIMPLE STUPID) – We added a switch bank so you could choose your level of resistor Your options are 18 Ohms, 20 Ohms (Default) and 22 Ohms. We have called this feature "MULTI-R" and it has now been implemented on the LT Switch v1.5 and the CK3 Probe v2.

We have also made sure that unlike other products, the underside of the PCB is protected against shortages from any exposed PCB traces (as implemented on the LT Switch v1)

The New Designed LT Switch v1.5 with MULTI-R. On Sale From March 28th £5.95 / $8.95 (Bulk Discounts Available As Usual).

….and the new design CK3 Probe v2 with MULTI-R Feature. Note we have also color coded the Probes so they can be easily identified. Remember that unlike other products, the CK3 Probe v2 also has Probe v1 Support (Liteon 74850 Key Dump with No Trace Cuts), has its own power isolator switch so you can be completely safe against shortages even if your CK3 is turned on and no rebuild PCB's to solder. The new custom made conductive glue is absolutely fantastic and as soon as that's ready to ship we will let you know. In the meantime you can buy the CK3 probe v2 without the glue for just £11.95 / $17.95 – Stock is expected to arrive before March 28th.

2 Responses to “CK3 Probe v2 First Batch Available & New LT Switch v1.5”

1. captainboo says:

   March 18, 2010 at 4:29 am

   Please please try to make the probe 2 work with Blaster CK3.

   Xecuter: It already does
2. pipadee2010 says:

   March 23, 2010 at 1:09 pm

   When is the tutorial available please got all the rest of the stuff just waiting for this and thank you for the time and effort that goes into these little helpful toys !!