Portio32 in windows 7

[swaj38812]

Does anyone know how to install the portio32 drivers in Win7. Another question is what exactly are these drivers for. I was having a hard time getting my drive to show up in jungle and was wondering if that could have been my problem not having these drivers installed.

[Teajunkie]

This driver is what allows windows to see your xbox dvd drive.

Installation.
You will need to open add hardware wizard.

• Install hardware manually i select from a list
• Have disk
• browse to portio32 files
• Click next
• Click next
• You're done!

Just restart to finish.

[DevilsBreath]

I have Windows 7 64bit is there any way to install port32 on my computer

[Goldensavage]

no devilsbreath you have 64bit os. portio32 is 32bit only

[Mjcrooksey]

Ok windows 7 is slightly different when installing the PortIO32 drivers.
I have written a guide on how to do it using the 32bit system

Hope people fine this helpfull

Regards

Attachment 1809

P.S. could a mod possibly add this to the custom guides link as now that windows 7 has been released its going to be a common question

[Ricey155]

nice work crooksey

i was tempted to load my copy of win7 and start flashing with it, but i cant be arsed to do the research all over again and again to find it sh1t like vista is oh and so sllllllllllllllooooooooowwwww

[192_26]

There is a 64 bit version of portio32 but it is very hard to get your hands on it cause they did make jf 64 bit compatible if I read right about 6 months ago. But I can't seam to find it anywhere. I starting to think they dumped it or a read totally wrong. Ricey155 Thats may same thought on windows7 it has been sitting here next to me over the last few days and I haven't even put the disk in the drive yet.

[Mjcrooksey]

Yer i just thought it would save time to make a guide as people are going to start installing windows 7 and its going to be a lot of posts that are not needed

Regards

[hkmarc]

You will need to open add hardware wizard.

I just installed PortIO32 that came with "JungleFlasher v0.1.67 Beta (50)" to my 32-Bits Windows 7. [It's in the map "PortIO32_Installer_NEW", get on xbins]
When I simply run it, it doesn't work.
But when I right click it, then hit 'run as admin', it works and the drivers show up in the device manager.

No need at all to open "add hardware" wizard

[Ricey155]

i installed win 7 as crookseys little guide no drama

drivers were installed as win7 does that, disabled and uninstalled rebooted and i get the problem I con (which you need)

flashing no stalls better than vista even tho i never had issues with vista

flashing made easy

[radament1]

There is a 64bit portio driver, its included in dosflash64.

[trooper202]

Ok windows 7 is slightly different when installing the PortIO32 drivers.
I have written a guide on how to do it using the 32bit system

Hope people fine this helpfull

Regards

Attachment 1809

P.S. could a mod possibly add this to the custom guides link as now that windows 7 has been released its going to be a common question

Thank you very much, you are my hero !!!

[mexican_metalhead]

Ok windows 7 is slightly different when installing the PortIO32 drivers.
I have written a guide on how to do it using the 32bit system

Hope people fine this helpfull

Regards

Attachment 1809

P.S. could a mod possibly add this to the custom guides link as now that windows 7 has been released its going to be a common question

i tried clicking on your guide but i got this message:

Invalid Attachment specified. If you followed a valid link, please notify the administrator

can you please reupload it? i installed portio32 but when i tried running jungleflasher i got this error:

Can't install portio32.sys driver!
Be sure to run as administrator!

this is really pissing me off.... i didn't have this trouble when i was using xp

[192_26]

Teajunkie has released a guide for getting portio going, plus in the latest version of jungle flasher it installs automatically. If your using a 64 bit os you will need read the readme or jf guide to get it working.

[mexican_metalhead]

Teajunkie has released a guide for getting portio going, plus in the latest version of jungle flasher it installs automatically. If your using a 64 bit os you will need read the readme or jf guide to get it working.

yeah i'm using jf 0.1.70 beta... that's the latest right?

i just recently upgraded to windows 7 64bit, then i figured that might've been the problem so i reinstalled it but as 32bit this time... still having the same problem

i keep getting the portio error just before jf pops up... i'm getting really frustrated here. it also says no via ports were found, it seemed as though windows had installed the driver automatically as it said it was working properly so i removed the driver like the flashing tuts say to and i've done it before with no problems on xp. that wouldn't have anything to do with it right?

i don't get why i keep getting the portio error if i even manually installed it

[Martin3912]

right now im on windows 7 32-bit and i have no problems

[192_26]

This was in the PortIO-Kai_Schtrom.txt file, try these steps for your 64 bit os.

Since Windows Vista 64 Bit and upwards it is necessary that every driver is signed. Because
the portio driver will not be signed by MS due to some unknown reason we need to cicumvent
this check. You have the following 2 possibilities to do this.


Recommended Way of Disabling Driver Signature Enforcement
1) Disable User Account Control (UAC)
- go to "Start Menu" > "Control Panel" > "User Accounts and Family Safety" > "User Accounts"
- click on "Change User Account Control settings"
- set the slider bar to the lowest value (Never notify) > click "OK"
2) Sign the portio64.sys driver
- download the "Driver Signature Enforcement Overrider" (DSEO) from
http://www.ngohq.com/home.php?page=dseo
- start DSEO > click "Next" > "Yes" > choose "Sign a System File" > "Next" > enter the path to
the used driver (portio32.sys or portio64.sys) > "OK" > "OK"
3) Disable Driver Signature Enforcement
- start DSEO > click "Next" > "Yes" > choose "Enable Test Mode" > "Next" > "OK"
4) Restart the computer

Keep in mind that with the recommended way the changes will have effect on every reboot without
doing anything manual. The first way needs to be done over and over again. In addition the second
way can be used to sign every driver that doesn't run natively on Windows 7.

I slightly edited the text the original file can be found in the jugleflasher folder. Im only using a 32 bit os myself, but i did use dseo on the portio32.sys file because I was having a similar problem as you, but I didn't run dseo in test mode.

[mexican_metalhead]

This was in the PortIO-Kai_Schtrom.txt file, try these steps for your 64 bit os.

Since Windows Vista 64 Bit and upwards it is necessary that every driver is signed. Because
the portio driver will not be signed by MS due to some unknown reason we need to cicumvent
this check. You have the following 2 possibilities to do this.


Recommended Way of Disabling Driver Signature Enforcement
1) Disable User Account Control (UAC)
- go to "Start Menu" > "Control Panel" > "User Accounts and Family Safety" > "User Accounts"
- click on "Change User Account Control settings"
- set the slider bar to the lowest value (Never notify) > click "OK"
2) Sign the portio64.sys driver
- download the "Driver Signature Enforcement Overrider" (DSEO) from
http://www.ngohq.com/home.php?page=dseo
- start DSEO > click "Next" > "Yes" > choose "Sign a System File" > "Next" > enter the path to
the used driver (portio32.sys or portio64.sys) > "OK" > "OK"
3) Disable Driver Signature Enforcement
- start DSEO > click "Next" > "Yes" > choose "Enable Test Mode" > "Next" > "OK"
4) Restart the computer

Keep in mind that with the recommended way the changes will have effect on every reboot without
doing anything manual. The first way needs to be done over and over again. In addition the second
way can be used to sign every driver that doesn't run natively on Windows 7.

I slightly edited the text the original file can be found in the jugleflasher folder. Im only using a 32 bit os myself, but i did use dseo on the portio32.sys file because I was having a similar problem as you, but I didn't run dseo in test mode.

so you didn't disable DSEO by enabling test mode? i'm in test mode right now and still no luck

[beshario]

dear all
firstly, thank you for this information.
can any of you guys direct me to a "portio64.sys" download?
i can not find this information any ware.
i am operating a windows 7 64 bit system.
thank you for your help.

[BGAMods]

this is the 2nd time youve asked in this thread, i moved the first to your own thread.