ABGX360 How to stealth check iso's "guide for noobs"

[Teajunkie]

Note to mods and other admins:
Please feel free to Edit/Update this guide as needed.

Here is a basic noob guide for abgx360 just follow the images so they match these and you cant go wrong.

Open your .iso image by clicking the open file button and locate your game iso file. (here im using Assassins creed 2)




Open the options tab and copy the ticks like below.




The manually patch tab should look like this.




The autofix tab should look like this. (i set mine to level 3)




Rebuilding should be like this.




Misc tab: You MUST make sure splitvid is added if it doesn't exist.
I cant stress enough how important this is for the new ixtreme LT.




Now save your settings by clicking file and save settings.




On this box just click ok to save as default. (this auto loads these settings upon each ABGX360 start)




Click launch to start the checking process.




If you dont have the .dvd file one will be created for you.




All green so far. (thats good)




Thats it finished you can see everything has passed as it's all green.
If anything comes back yellow just run abgx a 2nd time and the autofix should have fixed it.



NOTE: You may get an error with no matches etc.....
This may be that the game is too new and there hasn't been a verified rip of the game yet.
(@ this point it may be unsafe to play this game without being stealth verified.)
http://www.abgx360.net/

[uron1000]

Good job mate, there are lot of ppl that don't really know how to use it properly so please read.

Enjoy another good tut by my friend tea!

[redviffer]

Thanks very much easy to follow.

[EdgeZero]

any way to make them changes and save them so you don't have to keep switching them all the time you want to check a xbox360 iso?

[Xecuter]

any way to make them changes and save them so you don't have to keep switching them all the time you want to check a xbox360 iso?

of course.

File > Save Settings or CTRL + S

[Teajunkie]

any way to make them changes and save them so you don't have to keep switching them all the time you want to check a xbox360 iso?

I have edited the guide to cover this question.

Always good to pick up on faults!

[Yaltar]

Thanks for the great guide. I have one problem though. Under Starting Verification DMI comes up yellow (DMI is unverified). All else is as shown, Green. Any ideas?

Thanks

[Ubergeek]

It means its unverified on the abgx360 server. What advice are we supposed to give ?

[grambo]

Hello,
Thanks for the post. This is helpful.

I ran the ABGX on the new mass effect disk, which states its wave6. I get this error, and am unsure if this is a problem or makes the game unsafe to play online.

Thanks in advance.


Video partition found
Video CRC = E2FA3A26 (V0 = E0363F4E, V1 = EAE76B94)
Video partition does not match known data (could be corrupt or a new wave not
seen before)

Stealth status is uncertain

Starting Verification
Looking for F2703CD043F6FB01.ini in the online verified database
There is no verified rip of this Xex/SS combination in the online database
Failed to find a verified ini file for this Xex/SS combination
Verification failed

[modmonster]

You do know this game doesn't come on sale until this Friday right?
Therefore, abgx can't verify until the final retail data is out on the highstreet.

As a side issue.... As the game hasn't been released, you must have a pirate copy. You can only backup a copy of an original game you own.

No piracy talk on the forums!

[grambo]

You do know this game doesn't come on sale until this Friday right?
Therefore, abgx can't verify until the final retail data is out on the highstreet.

As a side issue.... As the game hasn't been released, you must have a pirate copy. You can only backup a copy of an original game you own.

No piracy talk on the forums!

Hi Modmonster,
The game retailed yesterday, on Tuesday; it is on ABGX. (US)

http://www.ebgames.com/Catalog/Produ...oduct_ID=74058
http://abgx360.net/verified.php?f=pressings&q=43F6FB01
http://abgx360.net/verified.php?f=pressings&q=F3C74B42

Thanks.

[Teajunkie]

You have to give it time to hit the database.

Just hold on for a few days

[grambo]

You have to give it time to hit the database.

Just hold on for a few days

Hi Teajunkie,
Alright, i assumed since it was on the site that it was in the database. if this isn't the case then i'll justhold off. It did auto fix a few other issues that i had with my backup, but just gave an error flag on the Video partition and was unclear as to the best way to approach it.

Thanks for your time.

[Teajunkie]

No problems.

Just hang on for a bit and it will be there!

[modmonster]

My appogies if your in the US and it's out. We dont get it till Friday.
it mite be helpful for people like me if you could update your profile with where you live.
As Teajunkie says, it'll take a nit of time to filter through.

[Amees]

Hello

I went and picked up my copy ME2 today and decided to back it up so the kids in my house dont besmirch my original disc.
I copied it and tried to verify it and every seems to go well except for this part which causes me some concern.


Video partition found
Video CRC = E2FA3A26 (V0 = E0363F4E, V1 = EAE76B94)
Video partition does not match known data (could be corrupt or a new wave not
seen before)

Stealth status is uncertain

Starting Verification
Looking for F2703CD043F6FB01.ini in the online verified database
Server File F2703CD043F6FB01.ini no newer than local file - not retrieved

Using F2703CD043F6FB01.ini <351 bytes>
Video CRC matches
V0 CRC matches
V1 CRC matches
PFI CRC matches
DMI CRC matches
SS CRC matches
Xex CRC matches

AnyDVD style corruption was not detected
Game CRC = D8EF863A

All CRCs match
Verifiation was successful, Stealth passed




Normally the section in yellow wouldnt bother me since at the end it says stealth passed. Problem is i figure that yellow flag would be removed when I run ABGX a second and third time, but its always there as if it wasnt fixed.
Will this be an issue for safe online play? Or should i just throw my original disc to the "wolves".

[Teajunkie]

If you are ripping the original then you will be fine!

[roosta]

Thanks for this. Just confirming, it's the exact same settings all-round for Abgx360 old and new version up to 1.0.2? I have the latest version and can only find tutes for older ABGX versions.

RoOSTA

[hrazor]

Thanks for this. Just confirming, it's the exact same settings all-round for Abgx360 old and new version up to 1.0.2? I have the latest version and can only find tutes for older ABGX versions.

RoOSTA

Yes, should be the same for all versions. As long as you have the same settings as mentioned in the tutorial you're good to go

[Nonov_U_Bizniss]

Hello

I went and picked up my copy ME2 today and tried to verify it and every seems to go well except for this part which causes me some concern.


Video partition found
Video CRC = E2FA3A26 (V0 = E0363F4E, V1 = EAE76B94)
Video partition does not match known data (could be corrupt or a new wave not
seen before)

Stealth status is uncertain

Starting Verification
Looking for F2703CD043F6FB01.ini in the online verified database
Server File F2703CD043F6FB01.ini no newer than local file - not retrieved

Using F2703CD043F6FB01.ini <351 bytes>
Video CRC matches
V0 CRC matches
V1 CRC matches
PFI CRC matches
DMI CRC matches
SS CRC matches
Xex CRC matches

AnyDVD style corruption was not detected
Game CRC = D8EF863A

All CRCs match
Verifiation was successful, Stealth passed




Normally the section in yellow wouldnt bother me since at the end it says stealth passed. Problem is i figure that yellow flag would be removed when I run ABGX a second and third time, but its always there as if it wasnt fixed.
Will this be an issue for safe online play? Or should i just throw my original disc to the "wolves".

I get the same exact warnings when I backed up my retail copy of Bioshock 2. So I guess I'm ok to go on line with it as well? As long as we're ripping our retail originals and still get these errors, it's safe to ignore them? What does it really mean that the video partions don't match? A bad/missing reference file uploaded to ABGX causing the mismatch? Or some inability of ABGX to match the files? Is this something that can/will be fixed in the future?

Can they be patched?