How To Rip Games Using Original Xbox Drive & 0800 Firmware *UPDATED FEB 17TH 2011*

[Teajunkie]

CLICK HERE FOR A NEWER FEB 2011 "OFFICIAL" GUIDE FOR USING THE XBOX BCKUP CREATOR INCLUDING VIDEOS
Thanks to TJ for his original guide - Xecuter

[barelynotlegal]

dont forget to have the av cables plugged in


Admin - Not required when you use a CK3 for power

[kenta]

hi
I follow stage 1.2.3 and have sata cable plugged in but my samsung ms28 don't show up in XBBC

before I flashed my drive I deleted file viamraid.sys should I put this file back?
so stage 1.2.3 work

reg kenta

[uron1000]

hi
I follow stage 1.2.3 and have sata cable plugged in but my samsung ms28 don't show up in XBBC

before I flash my drive I deleted file viamraid.sys should I put this file back?
so stage 1.2.3 work

reg kenta

You need to flash your drive with 0800 fw

Here is the latest one

[kenta]

You need to flash your drive with 0800 fw

Here is the latest one

ok so FW 1.61 some I have now don't work ok I will reflash my drive whit 0800

[uron1000]

ok so FW 1.61 some I have now don't work ok I will reflash my drive whit 0800

There are different fw's

ixtreme 1.6
ixtreme 1.61 ( samsung & Benq only)
ixtreme 1.6 0800 (for ripping disc's)

[kenta]

now it works and copy games

I reflashed my second drive samsung ms28 from v1.61 to v1.6 0800 firmware

before I flashed my drive I deleted file viamraid.sys after flashing I put this file back again so my computer find my samsung drive

thanks all for help and useful guide

reg kenta

[Teajunkie]

Guide finished and updated!

[Xecuter]

I updated the tute to add a bit more info and to clarify a couple of points

[symbal]

I'm trying xbc v2.9.0.306 and when i have my drive recognised in xp's device manager, but when i start xbc it shows message.. Action: Read DMI Sector, sense error: 5/30/02, UNKNOWN ERROR, CDB: READ DVD STRUCTURE, 0xAD 00 00 00 00 00 00 04 08 04 00 00, and i click ok and it starts, i select my drive at top and tick the options it shows and message box at bottom shows the drive's media info at 6.81gb but in the read tab i can't select any options, i can see start and cancel and image style but they not selectable, what am i doing wrong?

[kenta]

hi

All works great until I try to test and copy a original disk fifa 09 so comes this text up see picture below

http://img524.imageshack.us/img524/7...rninginxbc.jpg

Is there anyone some know what my problem is


reg kenta

[aboodshow]

thank you very much for your information
100/100 working

[david1nelson]

i open Xbox Backup Creator and it does not show my drive at top this is what it say at the bottom Found ODD: HP DVD Writer 1270d GH22 at [1:0]
Found ODD: SATA TSSTcorpDVD-ROM ms28 at [4:0]
Getting media info [1:0]
Media Type: Not Present
Getting media info [1:0]
Media Type: Not Present

[Martin3912]

i flash my drive with the sammy 16 sam... 0800 and then i when to the manager and i dont see my sammy there help

[Martin3912]

i got it to workk

[Carl10r]

Thanks for great tut,

Only problem so far is software said disc already appears to be unlocked..video will be filled and disc will not be stealth compatable??? whats that mean?

Samsung m28
800 firmware
via pci card
CK3

thanks
Carl

[BGAMods]

try loading xbox backup creator without the disc in. mine used to do that if i put the disc in before loading xbc. so i loaded it first then put the disc in and it was good.
hope that helps.

[Nonov_U_Bizniss]

Ok I can't seem to even get XBC running. When I click on

Xbox Backup Creator.exe I get the following error

Run-time error '339':

Component 'MSCOMCTL.OCX' or one of its dependencies not correctly regiestered: a file is missing or invalid

[Martin3912]

Ok I can't seem to even get XBC running. When I click on

Xbox Backup Creator.exe I get the following error

Run-time error '339':

Component 'MSCOMCTL.OCX' or one of its dependencies not correctly regiestered: a file is missing or invalid

update you windows and restart??

[Nonov_U_Bizniss]

update you windows and restart??

I found a copy of that file that the error was saying I was missing and dropped it in the same folder as xbc. Now XBC starts up fine but when I'm in device manager and put my liteon into vendor mode Windows XP SP3 (32bit) doesn't find it.

I'm using the blaster ck3 for the connection via sata