Flashing LT2.0 with wright key but not working.

[Filoppi]

i flashed Liteon 0225 with lt2.0 0225u (because my drive before was a 9504) i have a xecuter PCB and i flashed it with the right key that i extracted from the original drive board following a lot of guides.
i mounted it in my xbox lite and it only read dvd movies and music Cd.
if i insert a game dvd it told me: put this disk in an xbox, in a video.

so it behave like i flashed it with wrong key, but i flashed it a lot of time, a reextracted the original key a lot of time....i try to install lt1.9 and 0225 version instead of 0225u but it's never been working.
i don't know what to do....
any ideas?
THANKYOU!

*to flashit i used sata method with jmicron controller.

[peterrepek]

When you update the dashbord you use the TX PCB or you insert the original PCB inside?

[Filoppi]

i updated the dashboard befor to ever open my xbox. so with original pcb.
it's version 13599.

[peterrepek]

The error is also for the original DVDs?

---------- Post added at 14:12 ---------- Previous post was at 14:11 ----------

If also the original DVDs don't work then is time to buy the X360USB PRO.

[Filoppi]

yes is with original too (i triyed like 4-5 original)... i have only one backup and i don't know if it's working on really modded xbox. but i think it would.
anyway, i'm not buying an xbox360usbpro what difference does it makes?it cost too mutch... if i flashed my drive right, and i can see it is in vendor mode, i can reExtract the key that i flashed on TX pcb and they are the same as original. so what difference does it makes?

THANKYOU!!

[talby71]

yes is with original too (i triyed like 4-5 original)... i have only one backup and i don't know if it's working on really modded xbox. but i think it would.
anyway, i'm not buying an xbox360usbpro what difference does it makes?it cost too mutch... if i flashed my drive right, and i can see it is in vendor mode, i can reExtract the key that i flashed on TX pcb and they are the same as original. so what difference does it makes?

THANKYOU!!

difference it makes usbpro is compatible where your sata chipset might not be so doesn't flash correctly...also costs less than a game so doesn't cost that much really !

[Filoppi]

ok, i trust you but i rather wait for other answer that advice me to do the same.
i'll buy usbpro as christmas present for myself!

nobody know other solution, or can advice me something to do?

thankyou.

[whataretheyfeedingyou]

why are you flashing a 9504 with 0225? or am i reading this wrong?

[Filoppi]

9504 drive have been updated to 0225 automaticaly in latest dashboard.

[keil423]

I tell you what I flashed many of BenQ with my onboard sata chip set and never had a problem untill I got to a lite-on drive. It was at that time I needed to upgrade and get myself a USB pro to aid in the communication between the computer and the drive.
The onboard sata card work most of the time but not allways.

Judgeing by your symptoms Id say you just have a bad flash.

[whataretheyfeedingyou]

9504 drive have been updated to 0225 automaticaly in latest dashboard.

9404 gets updated to 0272 not 0225 or 0225u, this could be your problem...

[talby71]

9404 gets updated to 0272 not 0225 or 0225u, this could be your problem...

good pick up, there's his problem !
use the 0272 lt2.0 which you should be using !

0225u is for drives marked as 9504 but are actually 0225 in jungleflasher

[Filoppi]

good pick up, there's his problem !
use the 0272 lt2.0 which you should be using !

0225u is for drives marked as 9504 but are actually 0225 in jungleflasher

yes, my drive it's marked 9504 but JF see it as 0225.
that's why i used 0225u. i'm i wrong?
thankyou!

[swan.bag]

If jungleflasher says it 0225 it will be 0225 there were alot of 0225 drives milabled as 9504's