Cant Boot into Xell Black screen

[Kr4k 4 J4Ck]

yes i do believe it lowers it to switched 3.3v but i have not seen v2.5

Hmm well im not sure, but il try to fix the green wire in the morning then post back my results
Thanks.

[ando2k9]

much prefer the switched 3v tbh no constant glowing light and IMO gives it a better glitch, if it's trying to glitch but can't it's usually your green wire causing problems

[x23are]

falcon mobos are the best xbox for glitching and very very easy for RGHed them.
i didnt any problem whit falcons but some notes are to help you.
1.dump nand: no bad blocks in 0000---004F.
2.use 360multibuilder to make ecc image.
3.program CR: set it to NOR then program it.i had problem when i programmed it in PROG mode.(in all my glitchs).
4. be sure your wires routing is according to westboxs picture.
xecuter.com/coolrunner/phat_bottom_wires_alt.jpg
for red led problem i suggest you remove QSB and solder wires directly to mobo.

[Kr4k 4 J4Ck]

Going to resolder the green wire soon will post back with results

[Kr4k 4 J4Ck]

F*CK YEA! got the Xell reloaded screen, it must have been that green wire.
At first i started up my Xbox and i noticed it was actully starting up not 1 solid light,

after nothing comeing up on the screen i got really frustrated, but then noticed i had no AV cable plugged in

Thanks everyone who helped me il make sure to hit the thanks button

[reefz3ro]

glad you got it all sorted then!

[Kr4k 4 J4Ck]

glad you got it all sorted then!

Yep everything is good now its all working for now and its booting in under 5 seconds