Drinking and soldering do not mix

[Dimrain13]

I hope everyone already knew this. But i thought it was a good idea... anyways.. I haven't ever done that before and I only did it cause it was my personal console. Anyways, as you can tell from the pictures I messed up my CPU_rst not only did I do that but there is a wire sticking out and the resistor was lost. Is there any work around that would work with out a resistor?

yes I know this is a butched job... not only was this my personal...but also the board i used for practicing. Let me know.

[badwigga]

soldering is not easy at the best of times and u had a go after drinking,by the way just how much did u drink?

[Dimrain13]

soldering is not easy at the best of times and u had a go after drinking,by the way just how much did u drink?

5-6 double shot makers mart and Coke.

Could you help at all?

[Rome 16:16]

There are things which you can do better when you are drunk, but definitely not soldering.

[badwigga]

5-6 double shot makers mart and Coke.

Could you help at all?

ouch how was your head the next morning,martin or tejunkie might be able to help u.

[Dimrain13]

Ive had help from Teajunkie before I would like it if it was someone state side. cheaper and faster shipping.

[BGAMods]

Try xmods


Sent from my iPhone using Tapatalk

[BL4K3Y]

Try xmods

+1 for this, Xecuter recommended.

[Oggy]

Xmods is awesome.

I'm actually his biggest fan club.

[Dimrain13]

Ill check them out in das morning thanks for all your help!

[Loomingx]

It seems like a simple trace repair, provided your BAC is in Check.

[superspeed]

1-2 doubles is fine for settling the nerves 5-6 shots costs you some money

[xColorado880]

Xmods is awesome.

I'm actually his biggest fan club.

My buddy use to get a lot of work done by xMods. Says he's the best guy with xboxs he knows

[charincol]

I dumped the Nands on 5 consoles in one night while drinking Rum and Dr Pepper. No problems at all. Finally went to bed around 5 AM. It was a very good thing I didn't have work the next day.

[hodgie]

all you need is a 33ohm resistor and short length of Kynar. with a bit of patience, and 0 shots, you should be good!!

[hersheys247]

a bit of patience, and 0 shots,you should be good!!

LOL.


If i helped you in anyway, please press the THANKS and REP button

Sent from my brain tumor causing device using Tapatalk

[x360ccm]

all you need is no drink,a steady hand..meaning no dt and a 33 ohms smd resistor simple trace repair.job done.

[eblaster101]

casually drinking and drink drinking. But if you have never done solder work before than youtube and no drinking.

[crono1000]

Dgenx and hodgie are right... clean up the mess and find the trace. Wire up a 33 ohm resistor and all will be well. I had to do this exact fix on a unit a "well trained" customer had soldered lmao

Sent from my LG-P999 using Tapatalk 2

[iLLNESS]

scrape off the burned epoxy and fix the trace.

the burned epoxy makes things look worse then they really are.