Similar Threads

  1. [X360USB PRO] X350 usb pro v2 drivers installed but no sign of ck3i drivers, PLEASE HELP
    By ryacar09 in forum Xecuter X360USB PRO V2
    Replies: 13
    Last Post: 26th September 12, 10:30
  2. Replies: 4
    Last Post: 13th June 12, 15:47
  3. Replies: 41
    Last Post: 17th September 11, 01:26
  4. Breaking in.
    By Leafeater in forum Xecuter CK3 Pro / CK3 Lite
    Replies: 4
    Last Post: 2nd May 09, 02:13
  5. Mod w/o Breaking Seal
    By spacelordmf in forum Xbox 360 Firmware Support
    Replies: 13
    Last Post: 25th December 07, 17:17
Results 1 to 6 of 6
  1. #1
    Full Member
    Join Date
    Dec 2011
    Posts
    28
    Skill Level
    none
    Thanks
    9
    Thanked 0 Times in 0 Posts

    Question How to switch drivers without breaking them....

    Ok I have a " Samsung MS25 " driver in my xbox which doesn't work anymore and I bought a new " samsung MS28 " driver to switch it with. I tried this with my lite-on ( switch lite-on with a new lite-on ) and ended destroying them in the process because I didn't know how to do it exactly. If you tried and was able to do this before , can you tell me how please? I bought a couple of new driver ( lite-on, benq & samsung ) to be able to fix some xboxs in my store, So if you can also give essential points that I need to keep in my mind when I try to switch drivers in the future.

    P.S. Note that I am trying to switch MS25 with MS28.

  2. #2
    Full Member
    Join Date
    Nov 2011
    Location
    My house
    Posts
    95
    Skill Level
    Playing them! RGH'd a few consoles
    Thanks
    18
    Thanked 23 Times in 22 Posts
    There are plenty of tutorials about, give it a google. Samsungs are a lot more straight forward than liteons because of the lack of protection, so don't worry too much about, just make sure you get the key from the original drive before you do any writing etc

  3. #3
    Senior Member
    Join Date
    Jan 2004
    Location
    ireland
    Posts
    110
    Skill Level
    pc's,xbox 360 ,cool gadgets
    Thanks
    31
    Thanked 14 Times in 10 Posts

    Re: How to switch drivers without breaking them....

    Hi you need to flash the new drive with the old drives dvd key,you will need jungle flasher and a sata card or x360usb to connect your drive to the computer you have installed jungleflasher,then follow the guide to extract the dvd key from old drive and add it to the new drive.You just can't swap dvd drives over as they are key coded to suit each xbox 360.

    Here is a link to samsung ms25 guide.

    http://www.team-xecuter.com/forums/s...ad.php?t=60920

    click thanks to Ubergeek for this guide.
    Last edited by coleraine; 17th January 12 at 11:47.

  4. #4
    Full Member
    Join Date
    Jul 2010
    Location
    ulster
    Posts
    68
    Skill Level
    flashing
    Thanks
    92
    Thanked 33 Times in 16 Posts

    Re: How to switch drivers without breaking them....

    with the samsungs what you can do is swap the pcbs over , so take the new drives pcb out and replace it with your own drive and that will save you flashing it

  5. #5
    Full Member
    Join Date
    Dec 2011
    Posts
    28
    Skill Level
    none
    Thanks
    9
    Thanked 0 Times in 0 Posts

    Re: How to switch drivers without breaking them....

    The old drive was spoofed as a lite-on, therefore he can't update it. thats why I am trying to change the drives so he can play online again. I have 1 question though.

    1- I can't just swap the logic board ( since the flashed firmware is on it ) , Can I ?

    2- If I wanted to extract the key from the old samsung drive I should follow these steps:

    a- connect the drive through usbpro & ck31.
    b- read the drive.
    c- disconnect the old drive and connect the new one.
    d- read the new drive and choose the dummy.bin of the old drive as the source and the stock firmware of MS28 as target.
    e- write & outro.

    Will this work? I saw man tutorials, but all of them focuses on changing the logic board.

  6. #6
    Full Member
    Join Date
    Nov 2011
    Location
    My house
    Posts
    95
    Skill Level
    Playing them! RGH'd a few consoles
    Thanks
    18
    Thanked 23 Times in 22 Posts
    If the osig is liteon, he needs a liteon, new or old Samsung wont help. With Samsung he won't be able to play xgd3 games and will get flagged for a ban as soon as he goes online, that's of he's not already flagged from having a spoofed drive, long enough that it died.

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •