[Xecuter]

Make sure you push the d0 wire in so it makes a solid contact. The D0 LED will glow RED if contact is good.





Make sure the Xapt3r is screwed in firmly so it sits flush to the motherboard (use common sense and dont over tighten)

The red / green HDD / LAN wires do not have to be connected - however you will not get this feature - you must solder the wires to get this feature.

If you cant fit a no solder mod then give up - even tho I think they are lame they are also simple as hell.

The Xapter troubleshooting guide is - http://www.team-xecuter.com/xapter/

Its for the older version (non-x3) but the principles of troubleshooting are the exact same.