Similar Threads

  1. [LITEON DG-16D2S] open tray error - lt 2.0
    By crazyjeono1 in forum Liteon DG-16D2S 02510C
    Replies: 36
    Last Post: 4th November 11, 01:58
  2. Open tray error but tray doesn't even open
    By hacktek in forum The Noob Room
    Replies: 3
    Last Post: 2nd July 11, 17:02
  3. Open Tray Error on Lite-On PLDS DG-16D2S
    By togunyc in forum Xbox 360 Firmware Support
    Replies: 36
    Last Post: 21st October 10, 08:40
  4. Liteon DG-16D2S - Open Tray Error
    By crunde85 in forum Xbox 360 Firmware Support
    Replies: 10
    Last Post: 6th February 10, 01:00
  5. Open tray error, flashed, still open tray.
    By Stalker1 in forum Xbox 360 Firmware Support
    Replies: 4
    Last Post: 25th March 07, 14:52
Results 1 to 12 of 12
  1. #1
    Junior Member
    Join Date
    Oct 2011
    Posts
    15
    Skill Level
    good
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Open tray error DG-16d2s LT 2.0

    Hi guys,

    You recommanded me to buy liteon drive as i had before a spoofed samsung drive, the drive came yesterday with stock firmware 7485, i flash it using JF 1.89 using Samsung key and LTPlus-025-v2.0, my dashboard is 2.0.14604, flashing went ok, when i connect the drive to xbox and try to open the tray and it stuck some how i dont know, i searched in the youtube i found that i need to put a tape on the magnetic to reduce the strength of the magnetic and the tray is now opening, i tried to put a game like GOW3 it works fine, but for some games its not reading and shows open tray, i tried to adjust the lens using the adjustable 2 screws at the back of the lens as i turned the left screw quarter turn to the left, but its now not reading any disk at all, i return the screw back to its intial state but still not reading any thing and shows me immadiatly open tray, at lease before the CD were turning but now its not.. sorry for this newspaper, i though i need to explain to you so can help me


    regards

  2. #2
    Full Member
    Join Date
    Dec 2010
    Posts
    39
    Skill Level
    Destroying
    Thanks
    11
    Thanked 2 Times in 2 Posts

    Re: Open tray error DG-16d2s LT 2.0

    I would have returned the drive after the first problem of the drive getting stuck on ejecting. You got a bad drive.

  3. #3
    Junior Member
    Join Date
    Oct 2011
    Posts
    15
    Skill Level
    good
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Open tray error DG-16d2s LT 2.0

    you know my friend i live in UAE, i order it from UK, i recived after one week, i dont repeat the story back, becuase of that i thought let me fix it my self cause it'll take time to return and get a new one

  4. #4
    Senior Member
    Join Date
    Jan 2004
    Location
    ireland
    Posts
    110
    Skill Level
    pc's,xbox 360 ,cool gadgets
    Thanks
    31
    Thanked 14 Times in 10 Posts

    Re: Open tray error DG-16d2s LT 2.0

    Hi maybe I am wrong about this,as I am a noob myself,but if was a new liteon 7 series I think you may have flashed with the wrong update,as it would have not been reverted to 025,it was only Gears of war 3 and the new update that set the drives to 025 ,I think.Just check with someone who know alot more and can give you the correct advice.
    I could be totally wrong.

  5. #5
    Junior Member
    Join Date
    Oct 2011
    Posts
    15
    Skill Level
    good
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Open tray error DG-16d2s LT 2.0

    i tried also battlefield 3 and its working.....please guys help me

  6. #6
    BANNED
    Join Date
    Jan 2011
    Location
    south coast UK
    Posts
    3,692
    Skill Level
    novice
    Thanks
    733
    Thanked 1,281 Times in 1,075 Posts

    Re: Open tray error DG-16d2s LT 2.0

    was it retail your gears of war.also is it only back ups you was gettin this prob with.

    and was the drive you got new or a used one.

    can you post your jf log
    Last edited by x360ccm; 24th November 11 at 11:45.

  7. #7
    Junior Member
    Join Date
    Oct 2011
    Posts
    15
    Skill Level
    good
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Open tray error DG-16d2s LT 2.0

    i dont have original games, and regarding the drive if its new or not, i think its not new,that how they send it to me the Modetraders.co.uk, check JF log

    JungleFlasher 0.1.89 Beta (284)

    Session Started Wed Nov 23 19:27:01 2011



    This is a Wow 64 process running on 8 x 64 bit CPUs

    portio64.sys Driver Installed

    portio64.sys Driver Started, thanks Schtrom !

    Found 6 I/O Ports.

    Found 1 Com Ports.

    Found 5 windows drives C: D: E: F: G:

    Found 1 CD/DVD drives F:



    Loading firmware file D:\xbox360\Lite_CFW LT 2.0.bin

    MD5 hash: 813cda264005acdbb6e78bcd8cad39e5

    Drive key @ n/a 7354E4F0CDD92722FFA6CE6AE614D250

    Firmware Osig: [PLDS DG-16D2S 0251]

    Firmware is: LT-Plus 2.0

    Drive is Lite-On..



    Sending Lite-On-Erase request to port 0xF600

    ..............

    Drive returned Status 0xD0

    .........

    Serial flash found with Status 0x72

    Manufacturer ID: 0xC2

    Device ID: 0x11

    Flash Name: MXIC(MX25L2005)

    Flash Size: 262144 bytes



    Getting Status from port 0xF600

    SPi flash found with Status 0x72



    Sending Chip Erase to Port 0xF600

    Erasing:

    Writing target buffer to flash

    Writing Bank 0: ................

    Writing Bank 1: ................

    Writing Bank 2: ................

    Writing Bank 3: ................



    Flash Verification Test !

    Reading Bank 0: ................

    Reading Bank 1: ................

    Reading Bank 2: ................

    Reading Bank 3: ................

    Write verified OK !



    Sending Vendor Outro to port 0xF600

    Drive is Lite-On..

  8. #8

    Join Date
    Dec 2010
    Location
    Bournemouth, United Kingdom
    Posts
    201
    Skill Level
    Moderate
    Thanks
    28
    Thanked 61 Times in 44 Posts
    You will make yourself very unpopular for that remark... sounds like you got a dud, but you may have fried the laser messing with the laser pot without measuring the resistance.

  9. #9
    Junior Member
    Join Date
    Oct 2011
    Posts
    15
    Skill Level
    good
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Open tray error DG-16d2s LT 2.0

    but the laser is lighting.....!!!!!

  10. #10
    BANNED
    Join Date
    Jan 2011
    Location
    south coast UK
    Posts
    3,692
    Skill Level
    novice
    Thanks
    733
    Thanked 1,281 Times in 1,075 Posts

    Re: Open tray error DG-16d2s LT 2.0

    Quote Originally Posted by brazil_1983 View Post
    i dont have original games, and regarding the drive if its new or not, i think its not new,that how they send it to me the Modetraders.co.uk, check JF log

    JungleFlasher 0.1.89 Beta (284)

    Session Started Wed Nov 23 19:27:01 2011



    This is a Wow 64 process running on 8 x 64 bit CPUs

    portio64.sys Driver Installed

    portio64.sys Driver Started, thanks Schtrom !

    Found 6 I/O Ports.

    Found 1 Com Ports.

    Found 5 windows drives C: D: E: F: G:

    Found 1 CD/DVD drives F:



    Loading firmware file D:\xbox360\Lite_CFW LT 2.0.bin

    MD5 hash: 813cda264005acdbb6e78bcd8cad39e5

    Drive key @ n/a 7354E4F0CDD92722FFA6CE6AE614D250

    Firmware Osig: [PLDS DG-16D2S 0251]

    Firmware is: LT-Plus 2.0

    Drive is Lite-On..



    Sending Lite-On-Erase request to port 0xF600

    ..............

    Drive returned Status 0xD0

    .........

    Serial flash found with Status 0x72

    Manufacturer ID: 0xC2

    Device ID: 0x11

    Flash Name: MXIC(MX25L2005)

    Flash Size: 262144 bytes



    Getting Status from port 0xF600

    SPi flash found with Status 0x72



    Sending Chip Erase to Port 0xF600

    Erasing:

    Writing target buffer to flash

    Writing Bank 0: ................

    Writing Bank 1: ................

    Writing Bank 2: ................

    Writing Bank 3: ................



    Flash Verification Test !

    Reading Bank 0: ................

    Reading Bank 1: ................

    Reading Bank 2: ................

    Reading Bank 3: ................

    Write verified OK !



    Sending Vendor Outro to port 0xF600

    Drive is Lite-On..
    if the drives from modtraders it will be ok,there was prob no need to mess with the laser.

    as you dont own any orig game.

    then go get some

  11. #11
    Junior Member
    Join Date
    Oct 2011
    Posts
    15
    Skill Level
    good
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Open tray error DG-16d2s LT 2.0

    question?? when i adjust the laser pot?? did i damage it or what??

  12. #12

    Join Date
    Jan 2011
    Location
    Canadia
    Posts
    268
    Skill Level
    playing games
    Thanks
    76
    Thanked 64 Times in 62 Posts
    Trying to do a pot tweak on a laser without a multimeter won't turn out well in most circumstances. Also, not having any original games won't do you any good here on these forums.
    And no, you can't do a visual inspection on the strength of the laser. It lights up because there is power to it, not because ya string enough to read a disc.

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •