Similar Threads

  1. [CANADA] Wanted Jtag HDMI or Jtag-able NO RROD
    By HungrySage in forum Request For Service Or Item
    Replies: 2
    Last Post: 3rd September 11, 21:55
  2. [USA] Looking to buy Exploitable motherboard rrod or not hdmi for that gaming experience!!!
    By WestCoastConsoles in forum Request For Service Or Item
    Replies: 0
    Last Post: 20th August 11, 09:02
  3. [JTAG] Looking for Pre NXE/Jtaggable RROD Motherboard
    By WestCoastConsoles in forum Request For Service Or Item
    Replies: 7
    Last Post: 1st August 11, 03:11
  4. Motherboard Swap Rrod To Non Rrod Help Plz
    By looney2008 in forum Xbox 360 Firmware Support
    Replies: 3
    Last Post: 14th November 09, 08:27
Results 1 to 6 of 6
  1. #1
    Full Member
    Join Date
    Jul 2011
    Posts
    65
    Skill Level
    None
    Thanks
    6
    Thanked 2 Times in 2 Posts

    RROD Jtag Motherboard.. help?

    Hi. I have bought a RROD JTAG motherboard from fleabay which I'll fix.

    However, there was no DVD drive with the motherboard, and I understand the DVD key can be extracted from the motherboard. If I extract the key, do I need to know which model of DVD the console had- or can I skip it and just boot from HD?

  2. #2

    Join Date
    Mar 2010
    Location
    peterborough UK
    Posts
    1,896
    Skill Level
    i know everything about that which i want to know.
    Thanks
    487
    Thanked 780 Times in 602 Posts

    Re: RROD Jtag Motherboard.. help?

    when you have the cpu key you can decrypt the nand and retrieve the kv info and you will see the drive info displayed. i prefer jtag tool for this personally.

    The Following User Says Thank You to garageinc For This Useful Post:



  3. #3

    Join Date
    Oct 2010
    Posts
    173
    Skill Level
    Modification
    Thanks
    68
    Thanked 22 Times in 21 Posts

    Re: RROD Jtag Motherboard.. help?

    people normally just play from harddrive ... That's why JT's have large HHD's!

  4. #4

    Join Date
    Jan 2011
    Location
    Walsall, UK
    Posts
    279
    Skill Level
    RGH Installs, Drive Flashing
    Thanks
    137
    Thanked 59 Times in 52 Posts

    Re: RROD Jtag Motherboard.. help?

    Don't they normally boot in to xell with no DVD inside?

  5. #5
    Senior Member
    Join Date
    Oct 2009
    Location
    swindon.SN2.uk
    Posts
    126
    Skill Level
    hardware
    Thanks
    13
    Thanked 3 Times in 2 Posts

    Re: RROD Jtag Motherboard.. help?

    Yea if no drive is in the console and freeboot is flashed it will go to xell ,

    Unless u choose the option in jtag tool for no dvd or put a jumper in on drive power connector on the board
    Then it should boot freeboot/nxe

    I prefer the jumper method as a dvd drive can be put in without having to flash nand

    If you want to get to xell after any of these methods or a drive installed,when freeboot is flashed power on with eject and you boot xell
    Last edited by RavinNinja; 19th September 11 at 21:10.

  6. #6

    Join Date
    Jan 2011
    Location
    Pittsburgh
    Posts
    335
    Skill Level
    Software/Database
    Thanks
    44
    Thanked 57 Times in 52 Posts

    Re: RROD Jtag Motherboard.. help?

    You can pull the model from the NAND using 360 flash tool or CS's JtagTool. However, I dont believe you need to spoof it. As long as the correct key is flashed, the console will read games perfectly.

    I have done this with my Falcon. I replaces the BenQ drive with a Hitachi 59. Works flawlessly.

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •