Similar Threads

  1. Replies: 7
    Last Post: 6th January 12, 17:01
  2. IMGBURN and XDG3
    By suntec in forum The Noob Room
    Replies: 6
    Last Post: 25th October 11, 09:06
Results 1 to 7 of 7
  1. #1
    Full Member
    Join Date
    Aug 2009
    Location
    Birmingham
    Posts
    81
    Skill Level
    Novice
    Thanks
    4
    Thanked 5 Times in 5 Posts

    Imgburn Settings To Burn Xdg3's

    Is this em

    Settings-Write tab- Perform OPC

    then click on the cog picture on the bottom right of the screen next to the book

    Force hypertuning -Enabled (Advanced settings)
    Online Hypertuning -Enabled (Advanced settings)
    burn at 4x

  2. #2

    Join Date
    Oct 2011
    Location
    Cyprus (Nicosia)
    Posts
    1,060
    Skill Level
    iHAS BURN ANALYSIS / REFLOW & REBALL / RGH / FIRMWARE FLASH / CONSOLE MODS
    Thanks
    412
    Thanked 702 Times in 379 Posts

    Re: Imgburn Settings To Burn Xdg3's

    I don't understand this post:

    You can find assistance with settings by scrolling to the 4th post HERE EEPROM Settings are explained in detail

    The cog picture you mention sounds like the (Book Type)and this should not be touched, in no guide should it suggest otherwise.

    OPC is a matter of preference but personally I have it switched off cause in all likelihood you will need to clear the OPC history before the next burn.
    Always, hit the and buttons if someone helps you, or you like their post.

    The Following User Says Thank You to DrunkenNinja For This Useful Post:



  3. #3
    Full Member
    Join Date
    Aug 2009
    Location
    Birmingham
    Posts
    81
    Skill Level
    Novice
    Thanks
    4
    Thanked 5 Times in 5 Posts

    Re: Imgburn Settings To Burn Xdg3's

    so these settings

    IMGBURN SETTINGS:

    Layerbreak: Calculate optimal
    OPC=OFF

    EEPROM SETTINGS:


    SB=ON
    FHT=ON
    OS=OFF
    OHT=OFF



    what speed 2.4 or 4x?

  4. #4

    Join Date
    Oct 2011
    Location
    Cyprus (Nicosia)
    Posts
    1,060
    Skill Level
    iHAS BURN ANALYSIS / REFLOW & REBALL / RGH / FIRMWARE FLASH / CONSOLE MODS
    Thanks
    412
    Thanked 702 Times in 379 Posts

    Re: Imgburn Settings To Burn Xdg3's

    (x4) speed, it's all in the guide.

    Thes images are to be burnt with a Liteon iHAS (X)24 e.g. 124, 224 etc patched with the "Burner Max" firmware created by c4e.

    If your burner offers to write to the end of the image and truncate the disc then, your using the wrong burner or it was not flashed correctly.
    Always, hit the and buttons if someone helps you, or you like their post.

  5. #5
    Full Member
    Join Date
    Oct 2011
    Posts
    96
    Skill Level
    Newbie
    Thanks
    13
    Thanked 2 Times in 2 Posts

    Re: Imgburn Settings To Burn Xdg3's

    I burned 7 successful discs in a row, only 1 of them was close to failing the quality tests but the rest were fine.

    Think this is because I have smart burn enables which makes my drive create a writing strategy each time a burn so I get differences but I think its after 8 burns you get constant quality passing burns

  6. #6
    Noob Account
    Join Date
    Dec 2011
    Posts
    1
    Skill Level
    High
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Re: Imgburn Settings To Burn Xdg3's

    Quote Originally Posted by DrunkenNinja View Post
    I don't understand this post:

    You can find assistance with settings by scrolling to the 4th post HERE EEPROM Settings are explained in detail

    The cog picture you mention sounds like the (Book Type)and this should not be touched, in no guide should it suggest otherwise.

    OPC is a matter of preference but personally I have it switched off cause in all likelihood you will need to clear the OPC history before the next burn.
    Can you post a picture on how to turn off OPC? You never said how to turn OPC off, you only mentioned how to clear OPC history.

  7. #7

    Join Date
    Dec 2010
    Location
    Massachusetts, USA
    Posts
    2,854
    Skill Level
    Professional Couch Fucker
    Thanks
    1,678
    Thanked 1,076 Times in 826 Posts

    Re: Imgburn Settings To Burn Xdg3's

    amazing what google comes up with when you search for things when you are too lazy/stupid to search TX's wealth of info

 

 

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •