Similar Threads

  1. [RGH] Trinity with Cr3lite not booting Xell
    By Albablood in forum Xecuter CoolRunner / CR3 Lite Support
    Replies: 11
    Last Post: 14th March 13, 02:47
  2. [FIXED] DGX 1.1s not booting xell on trinity
    By Fawad in forum Xecuter RGX / DGX Support
    Replies: 40
    Last Post: 23rd February 13, 01:20
  3. Trinity not booting Xell, Glitch Light Flashes
    By bryce1733 in forum RGH / JTAG 4 Noobs
    Replies: 5
    Last Post: 26th December 12, 21:58
  4. Replies: 51
    Last Post: 7th September 12, 13:09
  5. [ANSWERED] RGH Trinity(slim) not booting into Xell
    By adtorpeeyu in forum RGH / JTAG 4 Noobs
    Replies: 7
    Last Post: 16th January 12, 21:12
Page 1 of 2 12 LastLast
Results 1 to 20 of 40
  1. #1

    Join Date
    Apr 2009
    Location
    England
    Posts
    249
    Skill Level
    Flashing
    Thanks
    144
    Thanked 41 Times in 35 Posts

    Trinity (14699) not booting Xell

    Hi,

    Busy doing RGH and after writing ECC the console won't boot into Xell - just black screen.

    Here's the log...

    ================================================== =
    25 March 2012 17:32:29



    No Updates Found


    Checking Files
    Downloaded *xeBuild/xeBuild/14717/cba_1941.bin
    Downloaded *xeBuild/xeBuild/14717/cba_4576.bin
    Downloaded *xeBuild/xeBuild/14717/cba_5773.bin
    Downloaded *xeBuild/xeBuild/14717/cba_6753.bin
    Downloaded *xeBuild/xeBuild/14717/cba_9230.bin
    Downloaded *xeBuild/xeBuild/14717/cbb_1941.bin
    Downloaded *xeBuild/xeBuild/14717/cbb_4576.bin
    Downloaded *xeBuild/xeBuild/14717/cbb_5773.bin
    Downloaded *xeBuild/xeBuild/14717/cbb_6753.bin
    Downloaded *xeBuild/xeBuild/14717/cbb_9230.bin
    Downloaded *xeBuild/xeBuild/14717/cd_1941.bin
    Downloaded *xeBuild/xeBuild/14717/cd_4576.bin
    Finished Checking Files
    Downloaded *xeBuild/xeBuild/14717/cd_5773.bin
    Downloaded *xeBuild/xeBuild/14717/cd_6753.bin
    Downloaded *xeBuild/xeBuild/14717/cd_9230.bin
    Finished Checking Files
    Trinity
    Reading Nand to S:\Xbox 360 RGH\J-Runner\output\nanddump1.bin
    Arm Version: 3
    Flash Config: 0x00023010
    Reading Nand
    Error: 250 reading block 3AB
    Error: 250 reading block 3F0
    Done!

    Reading Nand to S:\Xbox 360 RGH\J-Runner\output\nanddump2.bin
    Initializing Nand..
    Arm Version: 3
    Flash Config: 0x00023010
    Reading Nand
    Error: 250 reading block 3AB
    Error: 250 reading block 3F0
    Done!

    Comparing...
    Nands are the same
    Programming Coolrunner
    Flashing S:\Xbox 360 RGH\J-Runner\common\xsvf\trinity.xsvf to CoolRunner
    Input Filesize: 593E
    Output Filesize: 2B50
    Done!


    Exited!

    * found flash image, unpacking....
    ECC'ed - will unecc.
    UnECC'ed
    * found decrypted CD
    * found XeLL binary, must be linked to 0x1c000000
    * we found the following parts:
    SMC: 3.1
    CB_A: 9188
    CB_B: 9188
    CD (image): 9452
    CD (decrypted): 8453
    * this image will be valid *only* for: trinity (slim)
    * patching SMC...
    Patching Trinity version 3.1 SMC at offset 0x13B3
    * patching CB_B...
    patchset for 9188 found, 4 patch(es)
    * constructing new image...
    * base size: 70000
    * No separate recovery Xell available!
    * Flash Layout:
    0x0..0x1FF (0x200 bytes) Header
    0x200..0xFFF (0xE00 bytes) Padding
    0x1000..0x3FFF (0x3000 bytes) SMC
    0x4000..0x7FFF (0x4000 bytes) Keyvault
    0x8000..0x9ABF (0x1AC0 bytes) CB_A 9188
    0x9AC0..0x112BF (0x7800 bytes) CB_B 9188
    0x112C0..0x172BF (0x6000 bytes) CD 8453
    0x172C0..0xBFFFF (0xA8D40 bytes) Padding
    0xC0000..0xFFFFF (0x40000 bytes) Xell (backup)
    0x100000..0x13FFFF (0x40000 bytes) Xell (main)
    * Encoding ECC...

    100%
    ------------- Written into output\image_00000000.ecc
    Arm Version: 3
    Flash Config: 0x00023010
    Writing Nand
    Done!

    Exited!

  2. #2

    Join Date
    Jul 2010
    Location
    Colne, Lancashire (United Kingdom)
    Posts
    12,304
    Skill Level
    JTAG/RGH Installs & Repairs
    Thanks
    832
    Thanked 4,699 Times in 3,703 Posts

    Re: Trinity (14699) not booting Xell

    Can you post some images of your wiring please.

  3. #3

    Join Date
    Apr 2009
    Location
    England
    Posts
    249
    Skill Level
    Flashing
    Thanks
    144
    Thanked 41 Times in 35 Posts

    Re: Trinity (14699) not booting Xell

    Sure, just give me a minute...
    Attached Images Attached Images
    Last edited by he-man; 25th March 12 at 19:50.

  4. #4

    Join Date
    Jul 2010
    Location
    Colne, Lancashire (United Kingdom)
    Posts
    12,304
    Skill Level
    JTAG/RGH Installs & Repairs
    Thanks
    832
    Thanked 4,699 Times in 3,703 Posts

    Re: Trinity (14699) not booting Xell

    Does your CoolRunner show any debug activity (flashing green LED)?

    Have you tried the blue wire on different pads to get different wire lengths?

  5. #5

    Join Date
    Apr 2009
    Location
    England
    Posts
    249
    Skill Level
    Flashing
    Thanks
    144
    Thanked 41 Times in 35 Posts

    Re: Trinity (14699) not booting Xell

    Yes, I've tried 2 points.
    I'll check for lights on CR, don't recall any....

    Don't wanna waste youre time, so here's a few questions.
    Do I leave CR on PRG to test this?
    Do I need to hook everything (Nand-X) up to test?

  6. #6

    Join Date
    Jul 2010
    Location
    Colne, Lancashire (United Kingdom)
    Posts
    12,304
    Skill Level
    JTAG/RGH Installs & Repairs
    Thanks
    832
    Thanked 4,699 Times in 3,703 Posts

    Re: Trinity (14699) not booting Xell

    The CoolRunner switches must be set to NORM and SLIM but you can try switching to PHAT if you are having issues.

    The Following User Says Thank You to BL4K3Y For This Useful Post:



  7. #7

    Join Date
    Apr 2009
    Location
    England
    Posts
    249
    Skill Level
    Flashing
    Thanks
    144
    Thanked 41 Times in 35 Posts

    Re: Trinity (14699) not booting Xell

    I'll try that now. There's no lights on the CR by the way...

  8. #8

    Join Date
    Jul 2010
    Location
    Colne, Lancashire (United Kingdom)
    Posts
    12,304
    Skill Level
    JTAG/RGH Installs & Repairs
    Thanks
    832
    Thanked 4,699 Times in 3,703 Posts

    Re: Trinity (14699) not booting Xell

    One LED should be solid red (3.3v) and the other will blink green each time a "pulse" is sent to the CPU.

    Looking back at your images, you may want to remove all that solder from STBY_CLK and re-solder it.

  9. #9

    Join Date
    Apr 2009
    Location
    England
    Posts
    249
    Skill Level
    Flashing
    Thanks
    144
    Thanked 41 Times in 35 Posts

    Re: Trinity (14699) not booting Xell

    I only get a solid red on the CR.

    Will resolder STBY_CLK now.
    Last edited by he-man; 25th March 12 at 20:06.

  10. #10

    Join Date
    Jul 2010
    Location
    Colne, Lancashire (United Kingdom)
    Posts
    12,304
    Skill Level
    JTAG/RGH Installs & Repairs
    Thanks
    832
    Thanked 4,699 Times in 3,703 Posts

    Re: Trinity (14699) not booting Xell

    As I said, re-solder STBY_CLK and use less solder as you appear to have bathed the whole point.

  11. #11

    Join Date
    Jun 2007
    Location
    UK
    Posts
    1,681
    Skill Level
    proficient in most
    Thanks
    77
    Thanked 453 Times in 376 Posts

    Re: Trinity (14699) not booting Xell

    Is the STBY_CLK point bridged?

  12. #12

    Join Date
    Apr 2009
    Location
    England
    Posts
    249
    Skill Level
    Flashing
    Thanks
    144
    Thanked 41 Times in 35 Posts

    Re: Trinity (14699) not booting Xell

    Re-soldered - still no Xell.


    It's a real b#stard to solder...
    Attached Images Attached Images
    Last edited by he-man; 25th March 12 at 20:32.

  13. #13

    Join Date
    Feb 2011
    Location
    Southern California
    Posts
    315
    Skill Level
    modding
    Thanks
    36
    Thanked 126 Times in 65 Posts

    Re: Trinity (14699) not booting Xell

    Quote Originally Posted by he-man View Post
    Re-soldered - still no Xell.
    Doesn't look like it's being bridged in this picture. Time for you to break out the multimeter. First pic had you flooding it, bridging contacts, but this one doesn't look like it's making contact all all. So you may want to focus on STBY_CLK. Test with a multimeter.

  14. #14

    Join Date
    Apr 2009
    Location
    England
    Posts
    249
    Skill Level
    Flashing
    Thanks
    144
    Thanked 41 Times in 35 Posts

    Re: Trinity (14699) not booting Xell

    Test how?

  15. #15

    Join Date
    Feb 2011
    Location
    Southern California
    Posts
    315
    Skill Level
    modding
    Thanks
    36
    Thanked 126 Times in 65 Posts

    Re: Trinity (14699) not booting Xell

    Have you used a multimeter before? You want to test for continuity between the points that are to be soldered. So you'll want to set your multimeter to ohms and probe the points that are supposedly bridged. i.e. STBY_CLK.

  16. #16

    Join Date
    Oct 2010
    Location
    INCREDIBLE INDIA
    Posts
    198
    Skill Level
    FLASHING
    Thanks
    114
    Thanked 29 Times in 26 Posts

    Re: Trinity (14699) not booting Xell

    Simply remove that qsb and try to solder wire directly to that points ( B,E,F & 3.3V )and do a check with multimeter I think something wrong with that QSB with ur soldering.

    STBY_CLK point still with little bit doubt of bridged..?
    Last edited by ARUNCREATIONS; 25th March 12 at 20:50.

  17. #17

    Join Date
    Apr 2009
    Location
    England
    Posts
    249
    Skill Level
    Flashing
    Thanks
    144
    Thanked 41 Times in 35 Posts
    If I remove the QSB, how do I read/write the Nand?

  18. #18

    Join Date
    Oct 2010
    Location
    INCREDIBLE INDIA
    Posts
    198
    Skill Level
    FLASHING
    Thanks
    114
    Thanked 29 Times in 26 Posts

    Re: Trinity (14699) not booting Xell

    Hi u should have already read your original nand with that u have build the ecc image to boot xell,After booting into xell ( here u got stuck ) with cpu key u can build the glitch image and write it with help of Usb drive there is no need for QSB its only simplifies soldering works

    C this http://team-xecuter.com/forums/showthread.php?t=74694
    Last edited by ARUNCREATIONS; 25th March 12 at 21:05.

  19. #19

    Join Date
    Apr 2009
    Location
    England
    Posts
    249
    Skill Level
    Flashing
    Thanks
    144
    Thanked 41 Times in 35 Posts

    Re: Trinity (14699) not booting Xell

    Quote Originally Posted by ARUNCREATIONS View Post
    Hi u should have already read your original nand with that u have build the ecc image to boot xell,After booting into xell ( here u got stuck ) with cpu key u can build the glitch image and write it with help of Usb drive there is no need for QSB its only simplifies soldering works

    C this http://team-xecuter.com/forums/showthread.php?t=74694
    I still need to write the Nand though. HHow do I write the Nand with the QSB removed?

  20. #20

    Join Date
    Jun 2007
    Location
    UK
    Posts
    1,681
    Skill Level
    proficient in most
    Thanks
    77
    Thanked 453 Times in 376 Posts

    Re: Trinity (14699) not booting Xell

    just check for continuity first as "theagent" said..... check continuity on the QSB resistor as well

 

 
Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •