Similar Threads

  1. [RGH] Trouble w/ RGH on Xenon to recover DVD Key
    By Menethoran in forum The Noob Room
    Replies: 9
    Last Post: 4th November 12, 20:28
  2. how to recover DVD Key
    By daz24c in forum Xbox 360 JTAG Support
    Replies: 4
    Last Post: 28th May 10, 16:02
  3. trying to recover DvD Key.Can I ?
    By 966507033445 in forum Xbox 360 Firmware Support
    Replies: 0
    Last Post: 12th April 10, 03:07
  4. Possible dvd key recover???
    By Araaf in forum Xbox 360 Firmware Support
    Replies: 6
    Last Post: 16th April 09, 10:02
  5. Any way to recover?
    By bbr in forum Xecuter 2.6 (X2.6)
    Replies: 4
    Last Post: 9th August 06, 11:35
Page 1 of 2 12 LastLast
Results 1 to 20 of 22
  1. #1
    Full Member
    Join Date
    Jan 2011
    Posts
    36
    Skill Level
    Reball,RGH
    Thanks
    10
    Thanked 1 Time in 1 Post

    Recover KEY from Xenon

    Hi everyone,
    i'm trying to recover a CPUKEY from a xenon.
    Follow the guide but without success...
    Simply the DBG led is always off.
    if i solder CPU_RST in pad 2 like for all the other PHAT instead of left pad of C7R112, the coolrunner rev C starts to glitch...but never boot, anyway, also after 20hours.
    Tried various combination, CB 7375 to improve the boot but nothing.
    Suggestions?

  2. #2

    Join Date
    Jul 2012
    Location
    Canada
    Posts
    272
    Skill Level
    jack of all
    Thanks
    36
    Thanked 54 Times in 53 Posts

    Re: Recover KEY from Xenon

    Pics please
    Thanks And reps+1 are appreciated but only if I helped

  3. #3

    Join Date
    Mar 2011
    Location
    Arizona, US
    Posts
    1,342
    Skill Level
    Moderate to High
    Thanks
    462
    Thanked 382 Times in 340 Posts

    Re: Recover KEY from Xenon

    Well first off pictures(Close up and not blurry) of all solder points. What dashboard was it on...? You should read this Martin C →roadmap for n00bies
    Also I've read by Ubergeek that some xenons can take more than a day just to glitch once so you can retrieve the key.

  4. #4
    BANNED
    Join Date
    Mar 2006
    Location
    San Diego, Killafornia
    Posts
    628
    Skill Level
    Modding
    Thanks
    224
    Thanked 149 Times in 131 Posts

    Re: Recover KEY from Xenon

    I've had one going for two days and no xell. What I do to avoid heat issues is 12v fan mod and place fans right above heatsinks. Be careful leaving your xenon on for long periods of time without proper cooling. If green debug led stops working out of nowhere its most likely rrod. Good luck. Get them pics up.

  5. #5
    Full Member
    Join Date
    Jan 2011
    Posts
    36
    Skill Level
    Reball,RGH
    Thanks
    10
    Thanked 1 Time in 1 Post

    Re: Recover KEY from Xenon

    Quote Originally Posted by Fisticuffs View Post
    Well first off pictures(Close up and not blurry) of all solder points. What dashboard was it on...? You should read this Martin C →roadmap for n00bies
    Also I've read by Ubergeek that some xenons can take more than a day just to glitch once so you can retrieve the key.
    hi, it is not my first time i've already read that post however.

    dash is 8955

    i will post pics later

  6. #6
    Full Member
    Join Date
    Jan 2011
    Posts
    36
    Skill Level
    Reball,RGH
    Thanks
    10
    Thanked 1 Time in 1 Post

    Re: Recover KEY from Xenon

    hi sorry for my bad quality photos.
    Here you are:

    http://img696.imageshack.us/img696/7789/88979809.jpg

    http://img528.imageshack.us/img528/1817/cpurst.jpg

    http://img443.imageshack.us/img443/4790/clockpv.jpg

    http://img155.imageshack.us/img155/7596/vccs.jpg

    http://img3.imageshack.us/img3/5310/dandgnd.jpg

    http://img526.imageshack.us/img526/4848/40819010.jpg

    http://img99.imageshack.us/img99/8513/58262926.jpg

    http://img837.imageshack.us/img837/1674/img02941.jpg

    http://img20.imageshack.us/img20/4086/img02931.jpg

    the strange thing is...if i solder to left pad of C7R112 does not glitch at all, if i solder CPU_RST to pad 2 like all other phat it glitch but doesn't boot.
    The same thing happened to C7R112 pad, if i add in series a 1K resistor it glitches

  7. #7
    Full Member
    Join Date
    Jan 2011
    Posts
    36
    Skill Level
    Reball,RGH
    Thanks
    10
    Thanked 1 Time in 1 Post

    Re: Recover KEY from Xenon

    noone?

  8. #8

    Join Date
    Jan 2004
    Location
    Scotland, UK
    Posts
    36,222
    Skill Level
    Hardware diagnostics and modchip troubleshooting
    Thanks
    1,495
    Thanked 10,837 Times in 7,276 Posts

    Re: Recover KEY from Xenon

    What's going on with STBY_CLK?

    EDIT - CPU_RST: You solder it to the side which is NOT grounded. In your pic, the point is correct as it's upside-down in comparison with the T-X images.

    you may also want to think about the CPU_RST cleaner.

  9. #9
    Full Member
    Join Date
    Jan 2011
    Posts
    36
    Skill Level
    Reball,RGH
    Thanks
    10
    Thanked 1 Time in 1 Post

    Re: Recover KEY from Xenon

    Quote Originally Posted by Martin C View Post
    What's going on with STBY_CLK?

    EDIT - CPU_RST: You solder it to the side which is NOT grounded. In your pic, the point is correct as it's upside-down in comparison with the T-X images.

    you may also want to think about the CPU_RST cleaner.

    lol standby clock pad was partially lifted so i decided to resume the track with a piece of wire.
    I know, CPU_RST point in C7R112 is correct but the only difference with pad 2 of the other phat CPU_RST is a 1k resistor (in pad 2 you can see the resistor in series, just next to it).
    So what is preferable? Pad 2 or C7R112...with C7R112 does not glitch or sometimes makes a few and very fast glitches.
    With PAD2 glitches as a normal phat, but however no boot on xell...tried various combinations, no way

  10. #10
    Full Member
    Join Date
    Jan 2011
    Posts
    36
    Skill Level
    Reball,RGH
    Thanks
    10
    Thanked 1 Time in 1 Post

    Re: Recover KEY from Xenon

    don't have a cpu_RST cleaner but i've also tried a combination 3.3k with 680pf cap, no way, glitch but not boot

  11. #11
    Full Member
    Join Date
    Jan 2011
    Posts
    36
    Skill Level
    Reball,RGH
    Thanks
    10
    Thanked 1 Time in 1 Post

    Re: Recover KEY from Xenon

    thinking about a crazy solution (long but maybe working)
    1) desolder cpu+nand from xenon
    2) reball CPU and solder to a zephyr board
    3) RGH the zephyr and retrieve the key
    4) desolder CPU from zephyr and resolder to Xenon

    I know it is long and require a lot of work but could be done for desperate cases...
    however 2h of work for retrieve a key does not worth for a xenon

  12. #12
    BANNED
    Join Date
    Mar 2011
    Posts
    292
    Skill Level
    Flashing
    Thanks
    19
    Thanked 45 Times in 40 Posts

    Re: Recover KEY from Xenon

    Definitely not worth it.

  13. #13
    Full Member
    Join Date
    Jan 2011
    Posts
    36
    Skill Level
    Reball,RGH
    Thanks
    10
    Thanked 1 Time in 1 Post
    Could someone tells me their secrets for boot up xell on xenon?caps used,resistor used and which point D did you use!thx

  14. #14

    Join Date
    Feb 2011
    Location
    Grand Rapids, MI
    Posts
    7,852
    Skill Level
    ¯\_(ツ)_/¯
    Thanks
    193
    Thanked 1,633 Times in 1,156 Posts

    Re: Recover KEY from Xenon

    Quote Originally Posted by seve91 View Post
    Could someone tells me their secrets for boot up xell on xenon?caps used,resistor used and which point D did you use!thx
    I have no secrets to offer, i've tried 5 xenons, and none of them ever booted.
    Yeah, I provide modding services and fixes too.
    CLICKY HERE


    ​SPORTS

  15. #15

    Join Date
    Jun 2012
    Posts
    373
    Skill Level
    xbox360
    Thanks
    8
    Thanked 51 Times in 50 Posts

    Re: Recover KEY from Xenon

    I tried one and it never booted either.

  16. #16

    Join Date
    Jul 2010
    Location
    Colne, Lancashire (United Kingdom)
    Posts
    12,197
    Skill Level
    JTAG/RGH Installs & Repairs
    Thanks
    831
    Thanked 4,650 Times in 3,680 Posts

    Re: Recover KEY from Xenon

    Quote Originally Posted by seve91 View Post
    Could someone tells me their secrets for boot up xell on xenon?caps used,resistor used and which point D did you use!thx
    How do you know it hasn't already glitched?

    You can pull the CPU key/fuses over serial or HTTP - try it, because sometimes you won't get any video output.

    If the DBG LED is blinking, let it carry on because Xenons can take hours to glitch!

  17. #17
    Junior Member
    Join Date
    Feb 2011
    Posts
    15
    Skill Level
    Modder
    Thanks
    0
    Thanked 10 Times in 3 Posts

    Re: Recover KEY from Xenon

    Check out my thread from April, I've had luck with just about every Xenon I've tried:

    http://www.xecuter.com/forums/showthread.php?p=586786

    The Following User Says Thank You to LkBurn For This Useful Post:



  18. #18

    Join Date
    Jul 2010
    Location
    Colne, Lancashire (United Kingdom)
    Posts
    12,197
    Skill Level
    JTAG/RGH Installs & Repairs
    Thanks
    831
    Thanked 4,650 Times in 3,680 Posts

    Re: Recover KEY from Xenon

    Quote Originally Posted by LkBurn View Post
    Check out my thread from April, I've had luck with just about every Xenon I've tried:

    http://www.xecuter.com/forums/showthread.php?p=586786
    I remember you posting this.

    Didn't you have 100% success?

  19. #19
    Junior Member
    Join Date
    Feb 2011
    Posts
    15
    Skill Level
    Modder
    Thanks
    0
    Thanked 10 Times in 3 Posts

    Re: Recover KEY from Xenon

    Quote Originally Posted by BL4K3Y View Post
    I remember you posting this.

    Didn't you have 100% success?
    Hey BL4K3Y,

    Long time no talk, but yes. I had success for every Xenon except one. That one got RROD before I recovered the key and I just chucked it out. Wasn't worth it in my opinion.

    Other than that, I've got the keys to any exploitable Xenon. Sometimes in two glitches, sometimes in over a day. No matter the length of time, I've always recovered the key.

  20. #20
    Full Member
    Join Date
    Jan 2011
    Posts
    36
    Skill Level
    Reball,RGH
    Thanks
    10
    Thanked 1 Time in 1 Post

    Re: Recover KEY from Xenon

    Quote Originally Posted by BL4K3Y View Post
    How do you know it hasn't already glitched?

    You can pull the CPU key/fuses over serial or HTTP - try it, because sometimes you won't get any video output.

    If the DBG LED is blinking, let it carry on because Xenons can take hours to glitch!

    Left it over 2 days...still glitching green led blinking but no boot if i use pad2 for d point glitch but no boot,if i use c7r112 no way no green led...sometimes i have only 1 fast green blinking then nothing

 

 
Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •