Results 1 to 5 of 5
11th February 05 #1
!!! Enable to start Backup Bios !!! HELP..
I need some help please I installed my chip and all works OK.
Tried flashing bios and completes flashing and shutsdown when I start back up I get the following error:
(((((( It cycles On and Off twice both times with a beep, then it comes back on with the eject light flashing red and green there is no video feedback at all ))))))
Please see http://www.teamxecuter.com/forums/showthread.php?t=25379
I have tried starting with backup bios but still want start.
Please Help, Any Ideas
12th February 05 #2
don't be so skippy with your descriptions and expect help. First, tell us your xbox version, what bios you used, and all the steps that you have done. What were the switches settings etc.I\'m a noob
13th February 05 #3
what are the latest flash bios for the X3? (3.0.3?)
13th February 05 #4
The current versions of any Xecuter BIOS is listed on the teamexcuter home page (upper right corner).
But let me add. If your current flashbios works, it ain't broke, so don't fix it.1) 1.0 X3 2913 120Gig
2) 1.6 LPC Rebuild X3 1959_v16plus 160Gig
13th February 05 #5
- Join Date
- Oct 2004
- Skill Level
- flashing and repair
- Thanked 0 Times in 0 Posts
if you can get to the flash bios the install is good. it must be the bios you flashed with did you download it from the proper place, could it be corrupt, are you flashing using network or disk. The more info the better.V1.6 crystal
Seagate 160Gb HDD
CRYSTAL CP ROX!!!!!!
V1.1 black CP/LCD
XBOX 360 GEARS OF WAR