Results 1 to 2 of 2
Thread: DosFlash v1.9
31st December 10 #1
Kai Schtrom released a new version of DosFlash - a PC tool to flash your drive via DOS.
* SATA and IDE port scan improved in DOS and Windows. The ports are now enumerated with the CONFIG_ADDRESS and CONFIG_DATA register instead of using interrupts in DOS and SetupDixx functions in Windows. This change will detect more ports in Windows than the old SetupDixx method.
* Settings saved to ini file for DosFlash32 and DosFlash64. Settings like Port, Position, Task, COM Port, Enable Drives and DvdKey state are now saved to an ini file inside the program folder. If the ini file is not present it is created after the first run. On the first startup DosFlash will choose the most common and stable settings.
* EnableDrives option included in dialog as a check box. Due to high demand we removed the "Enabling CD-/DVD-ROMs" MessageBox on program termination and included a check box "Enable Drives" inside the dialog. For security and more stability this is deactivated on the first run. If you enable it the checked state is saved to the ini file.
* enabling drives in Windows caused some hangs from time to time, this is now fixed by a recoded enable drives function
* port drivers portio32.sys and portio64.sys are now added to the executable and unpacked during runtime
* PATA and SATA controllers list updated
* Fix for NForce motherboards in combination with drives like the "Samsung SH-D163C", "LG DH18NS40" or "LiteOn iHDS118". Some drives have problems with flash identify, read, write and erase. This is clearly related to the NVidia NForce chipset. For manual mode in DosFlash16 an additional command line parameter is added called "NFORCE FIX". This parameter should be set to 1 for NForce chipsets if you experience strange problems. In DosFlash32 and DosFlash64 we added a static control which shows if the NForce Fix is applied or not. Remember there is no need to activate this with every drive. It seems to be a combination between drive and NForce chipset that causes the problem. The fix is automatically applied for DosFlash16 in auto mode, DosFlash32 and DosFlash64.
* DosFlash32 and DosFlash64 are now DPI Aware for Windows7
* New task Verfiy Key/Inject Key added for verification/injection of drive keys. All DosFlash versions now have the possibility to validate drive keys against an XBOX360 drive and set the key for an XBOX360 drive. We use the same authentication method like the console to verify a key. In the Windows versions you have the choice to paste the drive key from the clipboard to our custom hex edit control or load a key file. To add a key simply click right inside the hex edit control and select your choice from the shortcut menu. In DosFlash16 you can enter the key in the format "1A-2B-3C" without quotes. Remember that a key has 16 bytes of data. The key file to import should also have 16 bytes of data like the key files exported by LiteOn Key functions.
* Removed multiple key extractions for LiteOn Key functions, added Verify Key after extraction. For LiteOn Key functions we removed the multiple extractions, because the key is now verified immediately against the XBOX360 drive.
* LiteOn Key V1 and V2 now also extract the file Serial.bin and the 2nd inquiry file Inquiry2.bin. We added the file Serial.bin and Inquiry2.bin to LiteOn Key functions. Inquiry2.bin is only generated for LiteOn drives V1 and V2.
* The drive key of Maximus patched UART drives can be extracted by using the task "LiteOn Key V1 (DvdKey)". The drive check has been removed from LiteOn Key functions. This way we can extract a key from an UART patched drive firmware by Maximus.
* LiteOn files are now extracted to a destination folder instead of prompting the user for every file name.
* LiteOn key extraction tasks separated per drive version in "LiteOn Key V1 (DvdKey)", "LiteOn Key V2 (FreeKey)" and "LiteOn Key V3 (Tarablinda)"
* In DosFlash32 and DosFlash64 the number of installed COM ports in the system are now enumerated instead of adding port 1 to 4
* For failing cdb commands the sense code is returned
* Geremia's Tarablinda functionality added. We added all Tarablinda tasks to every DosFlash version. You can extract the key by choosing the task "LiteOn Key V3 (Tarablinda)". For read, write and erase of the flash simply use the standard functions. Pay attention that the "LiteOn Erase V1/V2" task is only available for older LiteOns and not for the Slim. You should use "Read Flash", "Write Flash" and "Erase Flash" for the Slim. "LiteOn Key V3 (Tarablinda)" extracts 1 additional file in comparison to Tarablinda v04b, this file is called Xtram.bin and contains a dump of the XTRAM8000 area. This can differ in a few bytes from one dump to the next.
* Device Reset in DosFlash16 manual mode is now done automatically, there is no option to turn it off anymore
* Code optimization to work with modern SATA2 controllers added, remember to set SATA controllers to IDE and not AHCI mode otherwise Port I/O will not work
* Warning: The read, write and erase of the Slim drive is considered risky in general! So pay attention and always remember you use DosFlash on your own risk every time! Even during flash read the Slim gets flashed with a patched firmware sector to retrieve the complete dump!
* We had to change many command line arguments for DosFlash16 Manual Mode, because of the NForce Fix, added Tarablinda support and splitting of LiteOn Key functions. To get a better understanding we added the example section below.
Many thanks to Geremia, Modfreakz, Redline99 and Tiros for their support. Special thanks to Geremia and Modfreakz for drive sponsoring, testing, coding and much more. It is always a pleasure to work with you professional guys! Respect to Maximus for his UART enable patch.
Official Site: n/a, by Kai Schtrom
Download: n/a (might be illegal under EUCD/DMCA/EULA)
News-Source/Full NFO: xbins.org
The Following User Says Thank You to Xecuter For This Useful Post:
2nd January 11 #2
Re: DosFlash v1.9
I find this quite bizarre
Respect to Maximus for his UART enable patch
I have respect for Kai he does some great work - but come on......
The Following User Says Thank You to Xecuter For This Useful Post:
By yazzino in forum The Noob RoomReplies: 8Last Post: 20th April 11, 09:19
By neil324 in forum Xecuter CK3 Pro / CK3 LiteReplies: 8Last Post: 19th February 10, 02:09
By Hassman in forum The Noob RoomReplies: 6Last Post: 23rd June 09, 06:18
By Derrick in forum Xbox 360 Firmware SupportReplies: 1Last Post: 29th December 08, 04:38
By vergessen in forum Xbox 360 Case & Hardware ModsReplies: 2Last Post: 17th November 07, 19:25