The new Xecuter J-R programmer has been created to cater to the budget conscious and coded to work hand in hand with the latest version of the J-Runner app.
A third of the size of the Xecuter NAND-X and optimized to run faster than any other USB-SPI based tool (Example Speeds: Others average 16M read 7m 20s, JRP average 16M read 5mins 40 secs), this nifty tool can fully read/write NAND over SPI and can also program the Xilinx CoolRunner Dev Boards over USB !
Complete with a CoolRunner JTAG cable so you simply plug 'n program without any soldering using the latest J-Runner App (needs to be at least Build 268). Also comes with NAND installation wires that have the connectors that are compatible with the NAND-X QSB boards. If you don't use the QSB's you can simply cut off the connectors and do a normal wires only install.
The J-R programmer is also fully upgradeable and can be programmed using the Xecuter X360USB PRO Update app. Onboard LED's indicate Power and Bootloader Mode .
RED LED: Bootloader Mode (Switch to the left)
GREEN LED: J-R Programmer Mode (Switch to the right)
What's In The Kit:
On sale from May 1st at all good Xecuter stockists only $24.95
EDIT: Updated average read speeds. Some setups will be faster, some may be slower.