boot

  1. Z

    Fichier boot et license qui disparaisse

    Bonjour, bonsoir. (6.2 donc j'ai pris le Boot 2.4) Je me pose une petite question. Voila après avoir allumer sous SX OS et avoir fait toute les manipulations, j'ai voulu éteindre la "Nintendo Switch" et retirer la carte SD (64Go SanDisk), une fois la carte dans le pc j'ai remarqué que mes...
  2. 8

    SXOS 2.4 EmuNAND Boot.dat?

    Greetings! I tried to create an Emunand with the "Hidden Partition" option; Everything goes well and even you can "Boot SXOS FW" when it finishes, but if you power off the console and try to "Inject payload" again and try to boot SXOS Loader, it can't find "boot.dat" despite being on the SD...
  3. A

    Touch screen doesn't work most of the time when booting SX OS?

    Hi all, SX OS was originally working fine, then, all of a sudden the touch screen no longer works within SX OS during most boots. I can boot into the standard switch OS and the touch screen works fine. If I spend 30+ minutes booting into SX OS, hard restarting it, and booting it, eventually...
  4. M

    Clarification on bans given use-behavior. Advice please?

    I apologize in advance if my question seems out of ignorance or lack of research, but for the most part, I'm just looking for some clarity... I got my SX Pro a couple weeks ago, and it works great... Thank you! I've obviously, since, booted from the dongle and used the jig (I've never enabled...
  5. G

    Need Help Booting SX Nintendo Switch

    I Bought my switch in USA, last week, checked the serial number if was some of the new ones that are having trouble to hack. and it isnt. HAC-001 and Serial XAW10085305280. FM 5.1.0 I already bought a license to SX Os, got my joycon with wires to do the RCM, it worked well, i followed all the...
  6. Titanphoenix

    How do i set my x3 to boot to dashboard automaticly?

    Ok. I received my x3 not to long a go as a gift from my father. It did not come with a dashboard so i went and got the slayers evo x dashboard. However every time i boot it up to play it always boots to the bios. How do i fix this? And how do i get to bios once i have set this? Thank anyone who...
  7. speed3r

    Xbox 360 Trinity (Retail) Won't boot........

    Hello, So i got a Xbox 360 trinity retail(was never openend before/sealed) for a few bucks that didn't boot. After a lot of searching and testing it still wont boot sadly. When i plugin the power supply the xbox beeps one time (On/off sound) after that i can press all the buttons(on/off/eject)...
  8. N

    COOLRUNNER XBOX WONT BOOT AFTER RUNNING updflash.bin ON XELL

    I'm having trouble starting my Xbox, after I ran updflash.bin in xell (blue screen). The xbox doesnt boot and the coolrunners (cr3lite) green light is not flashing, but it flashed before the updflash.bin MB Jasper 16mb, dash 16747 (at least it was), and i'm using cr3lite rev. C chip, with RGH2...
  9. L

    Inconsistent Trinity Boots

    Finished up Trinity Rgh yesterday but cant get any consistent boots using CR3 Lite. Accidently lifted FT4R2 pad so had to rewire using R4D4 point and one below x-clamp (forgot); made a small splice through the bridge wire and soldered the blue wire to it. Mostly boots when I'm moving and...
  10. P

    Phat Falcon: Installed CR4 XL & DemoN - NANDs reading/writing fine but won't boot?

    Phat Falcon: Installed CR4 XL & DemoN - NANDs reading/writing fine but won't boot? Hey guys, so after slightly botching my DemoN install in my Phat Falcon, I had a much more experienced friend re-solder (directly to NAND legs!!) and he did a great job. Because of this, I can now successfully...
  11. ultimate360

    Unfriendly jasper, issues with booting... 10+minutes or none at all

    Ok, I have hit a challange for me today.. Anyways, here is the mandatory template: TX Product(s) used: CoolRunner REV C Console Type: Jasper NAND size: 16MB Dashboard version: 16747 CB version: 6754 Screenshot of NAND details from J-Runner: (photo 1) updflash.bin log (if applicable)...
  12. S

    Xbox 360 won't boot with DVD drive or HDD

    So my phat xbox 360 falcon wont boot with a dvd drive or hdd connected. it boots fine without either one but once I connect the sata cable from the drive and turn it on, the power light stays solid for about 5-8 seconds then starts flashing. the system will not boot. the drive and hdd are fine...
  13. ultimate360

    FIXED Jasper 16mb no glitch, no debug, nothing....

    I have came across a 16mb jasper with an issue. I have done quite a few rgh systems all successfully, but every time I attempt a 16 mb jasper, i hit a roadblock.... I have no idea why, but they just wont glitch or boot or do anything at all. I used the same install that i use on 256mb and 512mb...
  14. jdoe91011

    XBox Will Not Turn On, Does Everything Else Fine, Worked Previously, Please Help

    Hi Guys, I wasn't sure where to post this, but the RJTAG forum is somewhat applicable. First, I am not new to this stuff, I have successfully completed 2 Proto V2 installs, 2 RJTAG installs, and 2 Demon installs. About a week ago I finished installing a DemoN and an RJTAG into my 16MB...
  15. S

    CR3 LITE Issue, Please Help

    Hello to all! i'm completely new, i have never requiered to join and make a thread because i always look, search and read before anything. I have an Xbox 360 Slim, Corona Motherboard and DVD Drive LITE ON 1175. At first, by reading every post i came across, i believed that the best thing was...
  16. M

    RGH RGH Dual Nand not booting to retail!!

    Hey guys, some of you may have read my other thread but let me get you guys up to speed. I had a professional perform a dual nand on my 4GB Trinity Slim console about 2 weeks ago and I have been having freezing problems which he fixed by re-routing the CPU_RST cable. The re-routing helped for...
  17. oblivioncth

    RGH Trinity RGH (CR3 Lite) - 0020 on Stock dash

    Hi, I am a bit confused by why this is happening and now fear that I somehow did something wrong. I have a perfectly working Trinity RGH that I decided I want to install the DemoN in, but I had actually took this console online that one day MS messed up with the security checks so I thought I...
  18. ScrubbaDubby

    FIXED Easy Fast Booting Trinity Fix

    ***This is only an improved guide that bmonier made, it was difficult to read and understand and also had no pictures. His original post can be found here http://team-xecuter.com/forums/showthread.php?t=97931 I have only taken the time to rewrite it and take pictures. Credit also goes to MartinC...
  19. ppkpatrick

    RGH Trinity w/ CR3 Lite woon't boot Xell

    [FIXED] Trinity w/ CR3 Lite woon't boot Xell Have a trinity (dash 14719) which i'm installing a demon and cr3 lite in.This is my first demon install and it went fine,demon works perfect(reads,writes,toggles nand,flashes coolrunner,etc.)My problem is the coolrunner side of things.I can't get the...
  20. L

    Jasper won't boot with CR3 Lite soldered in

    Hi! I'm new to the RGH, but I did a lot of reading. I decided to RGH my 256MB Jasper and bought a CR3 and a NAND-X. I followed a Tutorial and read my Nand twice before doing anything else. Then I flashed a RGH1 Jasper xsvf file onto the CR3 and soldered it in. I tried to boot the XBOX with...