falcon

  1. I

    JTAG xbox360 falcon jtag...how do I write xell-reloaded with mtx spi nand flasher?

    Hi,I wanto to make a jtag console. How do I write xell-reloaded with mtx spi nand flasher? J-Runner v5 dose not support to write mtx spi nand flasher. Only read and creat...so I creat xell reloaded with J-Runner but I don't know how to write with nandpro? I tried that; nandpro usb: -w16...
  2. J

    My Motherboard

    Hi guys. This is my first post so please be understanding. I have a few questions about my console. I bought it 3 months ago very cheaply (50euros). I can not check what version of the motherboard has it. In my opinion it had to be replaced because it has signs of opening. the back side is...
  3. L

    What hardware is best for me to RGH2 my Phat Falcon?

    Hey, I have a phat 360 with a Falcon MB. I have researched into carrying out a RGH2 but I am unsure exactly what hardware I need / should use? I have seen people using Coolrunner Rev C successfully, however I have also seen a CR4 XL being used which seems similar. As you can tell I have never...
  4. S

    RGH JR Programmer V2 is not recognized when Xbox is turned on [FALCON]

    Hello, I am doing the following tutorial step by step: https://www.youtube.com/watch?v=6Qqj4KBLXLc I am trying to RGH a Falcon with similar dash version 17502. I am using the Jrunner V2 programmer where the pinout should be the same. I have checked the pinout like 5 times now, with...
  5. C

    can anyone shed some light on what the options are?

    Hello, I was given a phat xbox 360 which is already modded. The owner doesn't know what mod he has, he doesn't have any key nor original firmware. It seems to have a samsung drive and dashboard + kernel 2.0.12625.0. I can't find clear information on what can be done with this unit, can I update...
  6. A

    RGH Xbox 360 S Falcon freezes after 2 minutes

    Hi my name is almir and i have a problem with my xbox rgh im a noob at this but my falcon freezes after 1 or 2 minutes i send it to the guy i bought it from and he said ill look into it but he cant find the problem it doesnt matter if its in the dashboard or during games it freezes completly ive...
  7. Q

    PLEASE HELP I am Just getting Started

    Ok, not my intention to annoy anyone so please be patient as I am just getting into this tech. I need some guidance. I have a Falcon MB and Dash ver is, 2.0.17489.0 I ordered the PHAT Demon 1, it came with the BB upgrade. The first question I have is will I still be able to use my XBox Live...
  8. Zeigren

    FALCON Two Falcons, Two CR4 XL's, Zero Glitches Zero Bitches (R-JTAG)

    So I have two different Falcons and two CR4 XL's and neither of them will boot with RJTAG. So first one: Console Type: Falcon Programmer Used: JRP v1.1 NAND Size: 16 Dashboard version:2.0.15574 CB Version: 5774 Was the console working before you started: Y Do you get a green debug light appear...
  9. T

    FALCON Falcon, will not glitch

    Falcon, will not boot CR4 install will not boot. CR4 JTAG AUD Clamp install. Console Type: Falcon NAND size: 16 Dashboard version: need to double check CB version: 5774 Description of problem: glitch wont boot Was the console working before you started: Yes Here are photos of my install: I...
  10. K

    New need help

    Im new to this and was wondering if i buy the JR Programmer V2 and the Coolrunner Rev C for my falcon is this all i would need to rgh and also by using these products would it be RGH1, RGH2 or would it be a R-Jtag? also im on dash 2.0.16756.0 should i keep it there or update to the current...
  11. TechManSaver

    Xbox 360 Falcon Not Booting Rgh 1.2 Nand (xell boots)

    Hi there,i have rgh 1.2 this falcon xbox,and i have got the cpu key and created a glitch2 17349 dash image and written to it.But now when i power on the console,i either get 2 red ring of death errors.The bottom right led will start flashing,or just the top right and the bottom left will start...
  12. TechManSaver

    FIXED Falcon Xbox Not Glitching For First Time (Please Help)

    hi there,i have an xbox 360 phat falcon,and i have bought the coolrunner rev c and the jr programmer v2,and i have already got both the nand reads and are now good to go.But then after the reads,i noticed on the right,it wanted me to JTAG the console...WHAT???I thought i was supposed to rgh2...
  13. T

    GENERAL Phat Falcon CR Rev C or CR4?

    Hi guys, I have an xbox with a falcon motherboard with dash 17150. Would a CR Rev C work fine on that? I have had great results with CR Rev C's with falcons so if I can still get one I will if it will work. Or would I be better with a CR4? I know that CR4's are supposed to be alot better with...
  14. Xarao

    Falcon Has No ROL and Fans Don't Work

    Console Type: Falcon Programmer Used: JRP v2.0 NAND Size: 16MB Dashboard version: N/A (Not sure) CB Version: 5774 Screenshot of NAND details from J-Runner: (attach an image to your post) J-Runner log: Reading Nand to C:\Users\Apocolyptic-Guwop\Desktop\J-Runner\output\nanddump2.bin Initializing...
  15. J

    Why do some say not to RGH (2.0) a falcon board? Ive got like 5 of them but.....

    So i have like 5 falcon boards that have the disk drive error from someone replacing the drive and i cant fix them. I know i can grab the key from rghing but i might as well follow through and do the whole thing so i have a modded xbox for myself. Ive tried to do other xboxes and have messed up...
  16. asagoren

    RGH How to build retail nand for console that updated to rgh2 in XBL.from old rgh1 backup

    Hello to all the experts, i need some help please I got a falcon console that have been making some freezes on rgh 1, i flashed it back to retail and than used it as online console for some time. than i wanted to use it as rgh again so we did an rgh2 to it. now rgh2 making some freezings...
  17. T

    FALCON RGH2 Flacon freezes

    Whenever i load up a game on my RGH2 Falcon it will play for a few min then freeze, And if i try to use a RPC mod tool it freezes instantly. Could anyone please help me? It boots anywhere from 1 debug to three.
  18. T

    Fix for Falcon and Jasper CR4 / RJTAG+ issues

    If you have issues with your Falcon/Opus or Jasper glitching then freezing before hitting dashboard, or if xell only works but won't boot dash. These files are for you especially. If you have erratic boot times these files may also help improve that. RGH2 users using chips other than the CR4...
  19. M

    GENERAL Whats wrong with my rrod falcon?

    UPDATE I think i found the problem, the heat sinks weren't even touching the board. So that rrod falcon I got had more problems other than rrod... I booted it today cause I was bored, it booted halfway through the boot anim. Then it rrod and i booted it again to realize that the fans were...
  20. B

    CR4XL / JRP V2 install can't read cpu key, won't boot to xell, won't show hdmi

    Install Photos: https://www.dropbox.com/sh/m24pfxn949h4bt7/AAARLKv9uDfwRmbxTURyd5E4a?dl=0 Known: Falcon CR4XL JR Programmer V2 Pretty Sure: R-JTag install Issues So Far: A. J-Runner V.03 gets to the CPU Key and won't go any further, I am running MAC OS with VM Ware with Windows 7, I have the...