glitch

  1. ModchipCentral.com

    [WORLDWIDE] 360 PHAT OR SLIM RGH SERVICES USA/CANADA

    WE HAVE 360 PHAT OR SLIM RGH SERVICES USA/CANADA!!! BLACK FRIDAY WE WILL BE OFFERING THESE SERVICES FOR $80 WHICH INCLUDES THE HARDWARE & FSD LOADED ON THE HD. OUR TECH IS LOCATED IN FLORIDA & THE OTHER IN CANADA. JUST EMAIL US FOR INSTRUCTIONS PLEASE [email protected] THANK YOU...
  2. B

    RGH a complete rgh trinity with cool runner guide for a newbi please

    hi is their a complete step by step guide for a trinity reset glich with a cool runner rev c from start to Finnish anywhere please,I've looked everywhere i can think of,but unable to find a complete step by step guide for a newbi like me.any help is I'm very greatfull for many thanks in advance
  3. T

    FALCON Falcon, will not glitch

    Falcon, will not boot CR4 install will not boot. CR4 JTAG AUD Clamp install. Console Type: Falcon NAND size: 16 Dashboard version: need to double check CB version: 5774 Description of problem: glitch wont boot Was the console working before you started: Yes Here are photos of my install: I...
  4. R

    FIXED Cannot glitch TRINITY with CR4, need to understand Rater output

    Hey guys, So this is my second attempt at trying to glitch a 360. I had a Corona V5 that I just couldn't get to glitch regardless of settings and resoldering attempts, although since I do that so often day to day, that is the least of my worries at this point. I decided to try a Trinity...
  5. L

    Inconsistent Trinity Boots

    Finished up Trinity Rgh yesterday but cant get any consistent boots using CR3 Lite. Accidently lifted FT4R2 pad so had to rewire using R4D4 point and one below x-clamp (forgot); made a small splice through the bridge wire and soldered the blue wire to it. Mostly boots when I'm moving and...
  6. G

    RGH NEED HELP!! JUST INSTALLED CR3 LITE ON MY X-BOX AND NOT WORKING..

    Hi, Thanks for all the helpers.. I just installed CR3 lite to my x-box 360 E (super slim) i used a cpu post fix as well (for the C point) the Blue FT3T10 and its 10-14 cm long. tried the LK2 shot all off in S2 and LK1,3,4 all open the green light wont come up.. so i tried S2=2,5 ON then the...
  7. D

    ANSWERED Retail NAND does not detect HDD

    I apologize to begin with if this is not entirely in the correct section, however i thought it was most appropriate. I have retail dash 16756 on my console, with 16747 on my glitch NAND. All worked well, and then I did the Memory Unit Mod which I modded a 250GB HDD as my internal MU. FSD reads...
  8. PetrozPL

    Jasper 512 No Xell No retail backup

    TX Product(s) used: J-R Programmer, CR3 rev C, CR3 Lite Console Type: Jasper NAND size: 512 Dashboard version: 2.0.165XX CB version: not relevant Screenshot of NAND details from J-Runner: no valid retail dump J-Runner log: not needed, pre-build ecc with replaced KV Image of Coolrunner...
  9. A

    GENERAL Which is better for Glitching? Trinity or Corona ?

    Hi.... I am looking for a Slim to buy.. I just want to know if there is any difference between Trinity and Corona in terms of glitching and which is easier to mod, or if there is any other major difference between the two. Also, do I have to look for any particular version of Corona, such v1,v2...
  10. U

    RGH wont boot

    My RGH wont boot, I know it takes a while sometimes, but I don't think it would take this long. The green light does flash every 5 seconds, and I have the component cable in. Is it possible that the coolrunner somehow broke? If it really does take this long, is there any way to improve the boot...
  11. oblivioncth

    COOLRUNNER Help getting a Coolrunner v3 to glitch with a Rev C

    Help getting a Corona v3 to glitch with a Rev C Hey guys, so this is my first time doing a Corona V3 and I am having a hard time getting it to glitch. Unfortunately back when I ordered the parts the Slim Proto V2 wasn't shipping yet and the V1 was outta stock everywhere so I just got a Rev C to...
  12. Spec114

    CR Rev.B in Trinity Slim won't glitch

    I've had my Trinity glitched and working for almost 2 years now and have not had any problems. I took out my CoolRunner and programmed it to the Falcon XSVF for DVD key recovery since a friend fried his DVD drive trying to flash it. Finished the Falcon with RGH1 and put it back into my Slim...
  13. jdoe91011

    ANSWERED I Just RTAG'd My Jasper, Now What?

    So, I just finished RJTAGing my Jasper 512MB, and I am wondering what my next action should be. I did this mod so I could play backups off an external hdd, play dlc, install a big hard drive, play emulators, and for the challenge (which was the best part :wink:). What I am wondering is, now that...
  14. E

    2 Coronas v4-v6 wont boot with coolrunner rev C

    TX Product(s) used: J-R Programmer v2, Coolrunner rev C, QSB CR Upgrade, DGX, DIY SD Adapter, DIY No PostOut :) Console Type: Corona v4 Halo 4, Corona v4 standard NAND size: 16MB and 4GB Dashboard version: 2.0.16202 and 2.0.16197 CB version: e.g 13181 and 13182 Screenshot of NAND details from...
  15. musty89

    FIXED Corona V4 glitchs 5 times doesnt boot xell and rates score 2 always

    Board Corona V4 i'm using coolrunner V3/v4 fake post tried all timing settings cr3 rater always gives score 2 gilitchs always 5 times and stops what am i doing wrong?:facepalm: Thank you! =================================================== 4 Aralık 2013 Çarşamba 18:47:02 J-Runner v0.3...
  16. S

    Won't Glitch if Xbox is hot

    Let me start by saying that I did a search for this matter and couldn't find anything specific to my issue. If i'm wrong feel free to point me in the right direction. Thank you I recently installed a TX DemoN into my Corona v3. I'm using an RGX as a glitch chip. My setup works GREAT and it is...
  17. ISOSICKLEoCOM

    Trinity Unlimited Glitching

    So I bought the nand-x rgh kit a few months back, got stuck right after I extracted my nand, then just gave up. Decided to give it another try now. I got my nand extracted fine, flashed the coolrunner with the rgx trinity file, wrote my nand, and I'm at the glitching point. I have the Coolrunner...
  18. B

    RGH X360 Corona V1 won't glitch

    Hello, I have a Xbox 360 Corona V1 (Star Wars LE 320 GB) console with dashboard 13599, the CR3 Pro Ultimate Kit, Corona QSB V3, POST V2 and a JR-Programmer V2. I installed the Pro, the QSB and the POST. I read the NAND twice, and both compared identical. I created ECC. I wrote ECC. Then I...
  19. T3chWarrior

    GENERAL CR Glitch LED Mod for ALL Versions!!

    Hey guys, sorry I've been gone for so long. Just saw a lot of confusion with the CoolRunner LED mod options. Since superspeed's thread is so large I thought I would consolidate this process for everyone. I had planed on doing this back in may but got busy this summer. Also, I want to take a...
  20. B

    Can't Boot XELL, LED on coolrunner doesn't flash when glitching

    Okay so after my first mishap I decided to take my time and do things properly. I installed the coolrunner and demon in my other xbox flashed them both, took 4 NAND Dumps, 4 from DEMON and 4 from XBOX 360. I use the xbox nand to create an .ecc with the right dash. I then booted the xbox in...