I got a Xbox 360 lite-on drive with a broken(broken off) sata port.
So i did solder a sata port of a benq dvd pcb but the points are different from the lite-on drive.
So i was wondering if someone could help me if this is right (photos)
(Lite-on PCB Sata port Is this right?)
I don't have a lot of experience with this, I have just flashed a second liteon drive (first being the one in my xbox 360 a few months ago, second being one I just got out of an xbox with red ring of death). I planned on using this second one as a permanent drive in my pc for ripping...
Ok i dont know my exact model number for my drive but i am trying to flash it and it reqognized before and it ccompleted dvdkey32 and i have set source to target and i made the keys (2) MATCH.And then i go to mtk flash32 and i relooad and it doesnt see it.And i go to any other tabs it doesnt see...
Windows : 7 Professional , 64 bit . Running 64bit Portio .
Vendor : PLDS
F/W Rev : 0251
Sata type(Running on IDE for the sake of modding else JungleFlasher wouldn't work) : Intel(R) 7 Series/C216 family Chipset AND Intel(R) Z77 Express Chipset ( I have a Sabertooth Z77...
Hi everyone, im newcomer to xbox forum and also xbox 360 owner. (brought one because the last user have gta 5 and i was waiting for pc version but was too easy). Im living in Quebec Canada and thats it for now.
Have a nice days guys/girls ;)
Hello, I am new to all of this and I would like to flash mod my xbox. I would rgh or jtag but I don't went to spend alot of money so... Is it possible to swap my current disc drive (hitachi dl10n) with a liteon drive because I understand that they are easier to mod?? I know I will have to get a...
I inherited a broken 360s from my brother. The DVD drive (Liteon 0225) has a blown PCB with visible damage on the surface. I was wondering what I can do from this point.. I have no dumps/keys or anything of that sort.
I was looking at this...
I have falshed many drives sucessfully before ... but recently when i was flashing my 83850c from lt+ 2.0 to 3.0 .. my pc froze at the erase portion and upon restart my drive was no longer detected ... i tried dosflash16 and i was able to flash my original firmware with the correct dvd key after...
With all the help you guys gave me, I just wanted to show my Permanent MRA / Normal Mode Switch setup on my Liteon 16D2S drive. I do apologize for the photo quality the phone's camera sucks. I did the mod so I can easily update the firmware without taking the whole drive apart. I just take...
This is a phat xbox. I have the key from the LiteOn, but that drive is dead now.
I have a Hitachi 78 drive that Id like to replace it with.
Ive been doing a lot of researching and before I go on with the swap Id like to make sure I got it right..
The xbox is going to never be...
Hi, i am about to buy a ihas 524-t32 A, and the guy who is selling it says that some A models show up as B models when connected. The mfr date is January 2010.
Even if this drive is an A model will it work with burnermax payload or should I just get an ihas 124 c. thanks alot for any help. :smile:
Hello, I think I have a Lite-On DG-16D2S (Its for sure a Lite-On) and I failed at flashing it. I went through everything succesfully. Probing OK Power Cycling OK Writing OK but once I put it in my xbox it kept giving me the open tray error. So I put it back into my pc and then erased the fw off...
I have a slim that has a problem or 2.
When power pressed it boots and then freezes on the point during the boot called the "splash". When Hard drive is removed it has nothing on screen. Also it is a 250gb with no internal memory.
Whats the problem with this and any recommended fix?
Hi, I'm about to purchase tools for flashing my phat Xbox 360 Elite.
And I'm wondering if I can buy the CK3 Mini for powering the drive, and a Probe 3 Conversion Cable (so I can turn the drive on and off) and use the conversion cable only for the swith and use a homemade probe thats connected to...
I recently tried to flash my liteon-DG-162DS and when ever I plugged in the power to the liteon it fried the mobo I was wondering if there was any other way to get the dvd key with out the dvd drive and without RGH. Thanks in advance!!:)
I just flashed my xbox 360 with the ck3 probe 3 .
I recieved my iHas drive. its the 424-B model.
Right now im trying to flash the burner max firmware.
I read the tutorial on here on how to do so. So i have to put the drive to stock. In this case my drive is GL1B and i i have to put...