liteon

  1. manwinder

    vendor mode help

    i have a lt clip and switch v2, and i also have a probe v2,i have a liteon 93450, i got the cuts cut and the switch installed, the cuts were good, the led was green, i found the drive in jungle flasher and tried to get it into vender mode, but i can't, the intro never works, and i also put the...
  2. manwinder

    lt clip and lt switch v2, jungleflasher help

    i have got a new 360 and it had a 93450c drive, i tried it in jungleflasher and jf detected it, so then i made the cuts and installed the switch and clip, the switch said the cuts were good(green), when i pressed the ct(i think it is called that) button, i plugged the ltsw v2 ext, and set it to...
  3. M

    2.0.8955.0 & samsung(maybe) & AP25 = safe ?

    Hello folks. Situation: - xbox 360 (Pro i think) 60 Gb - DVD firmware(i don't know) - Dashboard: 2.0.8955.0 - wave 6 games runs without activate disc - buy the wire i think it's samsung drive, but on the back of console written with black marker "Liteon 25" - right now i don't have kit...
  4. M

    I need help updating my Lite On to LT+

    I had my lite-on 93450c flashed to LT V1.1 by a guy i payed. He gave me my drive's original firmware(.bin file). I've read a lot of posts on here. I believe i can connect my drive directly to my PC using a sata cable(because i have my .bin file). This is what i don't know: Do i need to leave my...
  5. M

    Disconnect laser on Liteon when flashing?

    So a while back, earlier this year it was mentioned that you should disconnect your laser cable when flashing a liteon (was it 7xx series only?) in order to save your laser from possible problems. However I completely forgot about this when flashing my 2 xboxs, (liteon 9xx and 7xx) With LT+ on...
  6. manwinder

    liteon 7 series help

    i flashed my liteon with a probe and it doesn't read any games or movies or anything, when the 360 starts everything is fine but when i put a game in, after 2 seconds it says eject tray
  7. manwinder

    liteon 93 series drive help!!!

    when evre i try to flash a 93 series drive i always fail, i have tried to use the probev2, lt switch, vampire, rebuild board and lt clip, i don't know why, after i do the soldering and cutting and install the board, the drive never pops up on jungle flasher, and it seems like there is no power...
  8. K

    Blaster CK3 + Liteon 93450C (already flashed) + LT+ = ???

    Hi all. Sorry if this question is redundant, I HAVE searched the forums trying to find this information but it's either buried somewhere that I couldn't find or simply not available. I currently have a modded Xbox which has a Liteon 93450C drive flashed with ixtreme LT firmware. I also have...
  9. A

    Flashing 93450c DVD Drive Xbox 360

    Hey everyone, I really need some help. I have tried to flash my Xbox 360, but I’ve had such bad results that I just want to stop and put my DVD drive back in my Xbox and play… but I can’t. I have already cut traces on the PCB of my 93450c Lite-On DVD drive and am now stuck. I have used a...
  10. A

    Are Liteon 74850 and 93450 hardware compatible?

    First of all I want to thank you for the great quality product. I have a brand new Liteon 93450 drive with fried PCB and bought an old but working 74850 replacement from ebay. I have the key from the 93450 drive. Can I use the PCB from 74850 with 93450? Are they hardware compatible? Should I...
  11. U

    ANSWERED Help needed, usb blaster ck3 jungle flasher

    Hey i'm Harry, and i'm guessing this is on another post but i did look and have spent literally 3 days googling trying to get my ck3 blaster to work via usb but to no avail :mad: my drive is a liteon 74850c i only just figured out how to get my com3 showing so that is now fine it is just in...
  12. E

    Trouble w/ LiteOn 74850c Firmware Update

    Hello fellow modders, I was looking for a little help flashing my LiteOn drive... so I will first state exactly what I have for hardware and what I'm trying to accomplish. I bought a second-hand Xbox 360 elite with a LiteOn 74850c installed. It turns out that the previous user had the drive...
  13. J

    ANSWERED swapping a benq drive in place of liteon

    i already swapped this benq drive in place of my old hitachi but now that xbox got the rrod for the 3rd time and ive been unable to fix it this time. i have another xbox that i bought in may of this year that has the liteon drive in it. is it possible to spoof the benq drive in place of the...
  14. T

    ANSWERED Liteon Replacement Question.

    If my original liteon was a dg-16d2s-09c (93450c) and I have the drive key and full firmware dump, can I write that firmware to a dg-16d2s (74850c) drive and it still be live safe? Not much light has been shed on the issue and I’ve heard that the drives are the same except for a slightly...
  15. Y

    CK3 Blaster and Unknown Liteon

    CK3 Blaster and Unknown Liteon [Updated] So I just got and installed a CK3 Blaster on a customer's 360 that has a mystery Liteon drive. The casing on it was a Benq but when we opened it up there was a Liteon. I attempted to connect the Liteon to the PC without the Blaster in order to try and...
  16. manwinder

    burning and copying games

    i wanted to copy a game i owned and when i put it in my computer dvd drive, but i couldn't copy it, do i have to connect my liteon xbox drive and flash it with the 0800 firmware to copy games, or do i have to buy a new dvd drive, if i do which do i buy and if i use the liteon, do i just plug it...
  17. M

    Bricked Liteon Drive - Its not really Bricked!

    For those of you who are struggling with flashing Liteon Drives and have managed to Erase the Firmware and cant get JungleFlasher to recognise the drive anymore, heres a quick video that may help. This tutorial should only be used if you have already successfully dumped your firmware and have...
  18. BloodRose

    No Drive Detected in Jungleflasher after performing trace cuts

    Unfortunately this drive doesn't seem to be playing ball although it is probably my fault somehow. I have tried cutting the v trace and the other one and connecting the drive to The Probe v2, CK3 and Sata but JF states that the drive isn't detected however when I tested it before doing the...
  19. BloodRose

    Would this conductive pen be OK to repair traces?

    http://uk.farnell.com/jsp/search/productdetail.jsp?sku=1663187 It looks to be a cheaper alternative to the one currently sold at Maplin, the difference being that the one at Maplin uses a silver solution and this one uses Nickel. The tech data sheet for the product says that the Resistance...
  20. L

    PCB repair/key extraction for fried LiteOn 09C.. help!

    Recently got a drive back from an installer and while trying to read the firmware I must have accidentally put the power cable in upside down (very stupid I know, still kicking myself). I've included some pics of the damage to the board, it dosent look that bad except for the hole in the board...