nand-x

  1. sirredz

    Windows 10 Updated Nand-X drivers for Intel 64bit

    First of all, Thanks to Team Xecuter for designing and creating such an awesome tool. Thanks to everyone involved in the software to use this amazing tool. Recently my WIndows 10 updated and I was no longer able to use my Nand-X. This was a problem in the past it seems, but seems to have...
  2. I

    Corona QSB V3 will not read nand

    I have a corona v3 motherboard that I am trying to RGH. I am using a corona QSB v3 to read the nand with a nand-x. When I try to read the nand i get Version 3 Flash Config: 0x00000000 Cannot continue. I know this usually means there is a problem with the soldering but i double checked everything...
  3. T

    RGH Corona V5: Flash Config: 0x00000000 after flashing nand

    Hi. I have Corona winbond motherboard. I successfuly read nand 3 times and all are the same. After that i check CR4 checkbox and write ECC... So i get CPU key and correct nand dump... I build freebot and write it, but after write xbox doesnt start and when i try to rewrite freebot a got message...
  4. L

    ANSWERED Nand-x randomly disconnecting when cable is connected

    Okay so I just got 2 nand dumps from my nand x so I know it's working however whenever I connect this (pic below) it doesn't turn on but I tried my JR programmer and it works? http://i.imgur.com/ZKOlvO6.jpg http://i.imgur.com/2oGKmIC.jpg Idk why it turns off my nand x when I have that cable...
  5. M

    Best place to buy nand x?

    I'm in the US and was wondering where the best place to get a nand x is.
  6. E

    DRIVERS nand-x drivers vmware fix ?

    Hi, i wanted to know if anyone found a way to install nand-x drivers in a vmware guest (workstation, linux host). Or on any other VM system (qemu, vbox..). MemoryAccess is detected, and the hardware id seem to be correctly advertised in the VM guest but win7 (x64) or XP, refuse to ackowledge...
  7. S

    GENERAL Xenon phat with broken DVD drive.

    Hello, I looked a while on this forum, I'm new here to see what I need to hack my X-box 360. I already hacked one X-box360 with jungle flash but that X-box 360 has the RROD now and I cannot fix it. Now I have another old x-box 360 (Phat Xenon) with a broken hard drive. I don't have my DVD-key so...
  8. M

    linux software for nand-x?

    Hi i was wondering/hopeing that team xecuter or someone could make some software that works in linux? so that i would have no reason to use "crap" windows. it would be greatly appreciated;D this is the dmesg for the nand-x [ 5224.844117] usb 4-2: new full-speed USB device number 2 using...
  9. Daddylonglegs

    NAND-X USB; read NAND fine, flash fine, console won't boot (pics included)

    Hey everyone. Been buying Team Xecuter stuff since the original XBox and have never been let down, so I am roughly 99% sure the issue with this is something I'm doing wrong :) I bought the NAND-X USB a while back when I learned my Jasper had a dashboard that was jtaggable. I soldered...
  10. athoz

    RGH Flash Config: 0x00000000

    Hello, I started to RGH my Falcon but a problem occured :frown: . I have done a Jasper successfully in the past. After soldering I started flashing with NAND-X and I got "Error reading block 1C2" while reading NAND during both first and second tries. After that I tried once more and then it...
  11. R

    GENERAL I have done my homework, but still wondering if I do anything for my banned console.

    Long time reader. first time poster. I have a falcon at 14719 that I accidentally got banned from Live ages ago when I was running an older custom DVD FW for back-ups before LT+Plus v.3.0. It has no hardware modications, as of yet anyway. I'm sort of sick of dealing with the profile...
  12. gangrel_1313

    Nand-X/nandpro dump problems

    I got my Nand-X RGH Edition and Cool Runner in the mail today, I tried to solder the QSB over the solder points, I wasn't able to read the nand and after multiple errors: "Looking for usb interface device, can not continue" and "could not detect a flash controller", I search and it all came back...
  13. N

    RGH Having problems, can you splice the wires and re-attach them? yeah, i'm a noob

    I know basic soldering skills. They're all right, and in place. Although I managed to pull the D pad off of my Coolrunner Rev. C, but I scraped the fiberglass and found the exposed wire, and re-attached the wire. My Coolrunner is completely programed, I have soldered everything correctly...
  14. T

    RGH Nand-X Connection Problem Xenon

    Hello, After reading the nands and getting two matching dumps and than writing Xell reloaded, programming the cool runner with the correct files (xenon) it wouldn't boot and I couldn't retrieve my CPU Key. I than tried to flash the original nands back, but than every time I plugged the power...
  15. Y

    [RGH] Couldn't get NAND anymore

    This is a long story for about 10 days, some failed but some successful, and I do apologize my poor English writing. I have a Jasper 16M, CB 6750 console. As well as Nand-X 3.0 with Coolrunner Ver B. At first, I have NandX wired and try to connect to board and get the nand. But I've keep...
  16. P

    JTAG E79 AFTER MISSING ONE SOLDER POINT

    I made a big mistake I missed a solder point on nand-x kit Xenon mobo like in the picutre I dumped the nand and wrote Xell (yeah I'm an idiot you don't need to tell me) I got error E79 I cannot write original nand the xbox shuts down when I try to use nand x to read nand, I already try to...
  17. D

    GENERAL JR-Programmer read/write speeds?

    Hi, I've been using a nandx for quite some time now, but have passed it back to its owner, reading the blog/sales pitch regarding th JRP I'm led to believe that it functions at around 80% of the speed that a NANDx actually does. After receiving my JRP and putting it to the test, my 16mb reads...
  18. S

    Is it possible to read dvd key from nand only?

    So I received several xboxs to fix that my friend said he couldn't fix. They all had red ring but are fine now. It looks like whoever put them all back together used a completely different drive in each one. After reading a lot into nand-x and coolrunner I order both. I was wondering if I had to...
  19. R

    RGH Install guide - Pls correct me if I'm wrong

    First of all, I'm new here, so Hello everyone. I bought the XECUTER COOLRUNNER PHAT BUNDLE and Xecuter NAND-X from xconsoles.com and I'll do the RGH in my Banned Falcon next week. I'm still with doubts maybe someone could clarify. -Using this guide I will solder the QCB for Nand-x and...
  20. H

    usb ports not working?

    hey guys, i just plugged in my nand-x and the lights dimmed out, then fadded out. i plugged my nand-x into my other laptop with the same cord and it came right to life. i goggled this and was directed to check my usb hubs in device manager. i did and they all appear to be working, and have no...