no glitch

  1. S

    CoolRunner Stopped Glitching After Update

    So I have an slim RGH trinity with a CoolRunner and a Cygnos360. I updated it a few years ago and ever since it has failed to boot. It boots like once in a million tries and I just recently got it booted into XELL so I could grab the CPU key, but it hasn't booted since. The retail NAND works...
  2. Shag_

    FALCON CR4 XL-Phat Demon Not Glitching [Falcon:]

    I Have a Phat 360 with a Falcon board that I successfully R-Jtaged a few years back following this guide: http://team-xecuter.com/forums/threads/135779-Xecuter-R-JTAG-Installation-Setup-Guide-***-UPDATED-JULY-26th-2013-*** . Shortly after I added the Demon and successfully using this guide...
  3. M

    RGH Corona V3 - No glitch - CoolRunner Rev C

    Hi to all: Im having troubles with a CORONA V3... I've dumped the nand right and wrote xell. I've programmed the chip with 4_3 and 2_2 timming files. I bridged succesfully the RSC6 and RSC7 points and installed the POST_FIX adapter. But i dont get my console glitching, just the red light on...
  4. musty89

    FIXED Corona V4 glitchs 5 times doesnt boot xell and rates score 2 always

    Board Corona V4 i'm using coolrunner V3/v4 fake post tried all timing settings cr3 rater always gives score 2 gilitchs always 5 times and stops what am i doing wrong?:facepalm: Thank you! =================================================== 4 Aralık 2013 Çarşamba 18:47:02 J-Runner v0.3...
  5. CALZALOL

    RGH Jasper (No Glitch Mobo) RGH 2.0 problems.

    Hi Guys, I have a Jasper Elite that won't glitch no matter what, at first I did RGH 2.0 then I did RGH 1.0, no glitching whatsoever. Any ideas on how to fix this? All help is appreciated. Thanks, CALZALOL
  6. T

    Possible Solder/CPU_RST/Patience Problem...

    So I've made it to the last step before I get to begin to reap all the RGH goodness. After searching I realize this is a common senario, but I digress. I used J-Runner step-by-step with no errors. After soldering everything, booted with stock nand...no problems. After programming the chip and...