no power

Hello. I recently tried to RGH my Conorona v1 Xbox. This was my first try and I didn't care much about braking it. I know my soldering is quite bad and it's like the third time I tried to resolder everything. I successfully flashed the xbox, removed JR Programmer, soldered Coolrunner Rev-C and...

I recently did 2 Nand dumbs of the original Nand on my trinity board with a Nand-x. The reads were successful, but the console randomly turned on during the reads. I was getting flash config errors after, so I went to see if the console was receiving power and it was not. I cannot get the...

Hi all, I have just joined the forum so apologies if I post in the wrong section. I also wasn't aware that there were different variations of board and chipset so if you need me to take pictures or send you details please let me know. I would REALLY appreciate some help I have a Xbox 360...

Hi all, i have a xbox 360e 4gb console. its a corona v6 motherboard. i was able to glitch the thing by using cr3 lite and tx post fix adaptor. got the cpu key via xell and after that the problem began. the console was booting fine and suddenly it stopped turning on and showed the red light as...

Hi! Don't know where to post this, but I have a strange problem with 3 consoles (same batch). First thing first. I have done a lot of RGH's and JTAG's earlier - like maybe 200, so I know what I'm doing and my soldering is allways good. All the 3 Coronas 4gb V2, Nand read with TX corona QSB...

So after what I thought was the worst luck ever with my previous R-JTAG install, it seems I have done it again. I am absolutely dumbfounded and have a knot in my stomach. Here is why. After a mostly failed install (forum still open for help!) of a R-JTAG kit on a falcon, which left me with a...

TX Product(s) used: CR3 Lite + Slim Demon Console Type: Trinity NAND size: 16 Dashboard version:2.0.16203 CB version: N/A Screenshot of NAND details from J-Runner: N/A J-Runner log:Attached Description of problem: Console working correctly prior to mod attempt. 1. Checked Demon before...

I have a quick question. My slim corona v2 recently got rgh'd. I sent it off to someone to do it and I just received it, it will not power on, but the power button beeps, and eject button beeps. I opened up the Xbox and found what looks like and oscillator bursted or leaked. Could this be the...

Hi, I got a virgin corona v2 which is not powering up, the guy was using a third party chinese adapter before it stopped working. The motherboard is absolutly clean and untouched. Any help? Tried with other rol boards, and other adapter.

Okay so a client brought me 3 Jtags, one xenon, one RGH Falcon, One Jtag Falcon. I updated all three of them manually for dash launch 3.2 beta and using fsdinstaller without checkign download update. I dump the nand on all three via nand flash 360 and created new image via J runner 0.2 beta. ...

Hi everyone! This has been the story of my life for the past 2 weeks. I bought a Trinity console, nandx (new rgh edition) package and Coolrunner rev C. At first, everything was going perfectly fine. I solderer the Slim nandx qsb, the Coolrunner and the slim post and soldered all the wires...

Reacently, i have been trying to unlock a few different 7xxx lite on drives. when plugged into my ck3i with the peobe 3, it wont power up. but my slim lite on will (even though theres no need) However, when i power itwith just the ck3i to dvd cable it came with, it opens, and powers up fine...

Hey guys so from before I used to use my desktop to flash my Xbox..but that desktop got too slow so I wanted a USB approach, I went ahead and preordered the X360USB Pro 2. It came in today and I installed the drivers and it was recognized in windows 7. For some odd reason however, there was no...

Hopefully I can get an answer to this ASAP as I need to start working on this console again tonight and I need to get it working for a customer. Ok so first off this isn't my first slim RGH I've done a couple before it and all went well. But this one has been doing some weird stuff. First I...

Hey, I'm in the USA, Indiana. I've done about 5 RGHs successfully. I had a friend that tried to do his instead of asking me to do it and he lifted the R4B24 pad and now his xbox won't power on or let you read the nand. I dont really want to attempt to repair it and was wondering if a pro in...

Setup for RGH on my Slim: Coolrunner soldered to QSB slim and Nand-X. I RGH'd my slim a couple days ago, got everything working fine. I was running Dashlaunch, and everything was Ok. I had some pretty long boot times, up to 5 minutes, so I was searching around. I found somewhere if I replaced...

Hey everyone! I'm in a strange predicament and I'm hoping someone here has an idea about what to do. I am rather new to modding these 360s but I've read tutorials everywhere and catch on quickly. My own 360 was modded by someone else back in February and there have been no issues. Recently the...

ok so i hooked up my xblaster ck3 i followed the guide down to every last step and i closed my xbox 360 and plugged it in and tried to turn it on and it flashed green but thats it my power brick the light is red on it i have the liteon drive DG-16D2S- fw version 83850c even after i took out the...