open tray

I recently bought a 2010 trinity slim with a bad disk drive from ebay. I was expecting it to be a simple fix like a new laser or dust blowout. But it has a open tray error that has me stumped because it's not a normal one. It used to give a open tray when the tray shut and the game spun for half...

Hello, recently I tried to flash my phat xbox 360 to the latest firmware, I used to have a guy who would do it for money, but being the person that I am I tried to save some money by doing it myself. Anyway I flashed to the latest firmware for my lite-on dg-16d2s fw ver: 74850C, everything...

Hey, Long time lurker, first time poster. Anyhow, down to business. Girlfriend asked if I could crack her brothers xbox (slim) for a christmas present. I had done a few whites before, so agreed thinking it couldnt be that hard. Purchased a X360USB for the job. got down to "cracking" 2...

Hi, so my first post on this form is related to my open tray error on my liteon labeled 9504, but was 0272 in reality in my slim xbox 360. I have flashed my drive using the kamikaze unlock and it worked perfectly. When the next dashboard update came around I flashed it back to the original...

so i kamikazied a slim seemed kind of deep then pop it unlocked . i completed flash - jf said write verify failed so i did it again and it verified i tested box it played games og and backups- friend called me 3 days later says it will not play anything now never did but today was first time he...

I have been working with my flashed xboxs for a while I ave 2 flashed lite on drives in the 7 and 9 series. I backed up my disk using xbox backup creator with my 0800 drive, then stealth patched it with abgx360 lvl 2 and 3, then burned with img burn to my verbatim disk. I used 2.4x speed and my...

Hey, I'm having one hell of a time with my slim's 'open tray' error. It's the sudden open tray error (no attempt to read the disk, game or dvd, no noise, no NOTHING :facepalm:), and I'm currently getting the 99$ to send my slim to Microsoft. Problem is, I attempted to open my slim because I...

ok so i did a kamikaze on a 0225 everything seemed fine but then i got write verify failed so i finished and outroed any way but drive just auo ejects so i searched this forum and found i probaly drilled to deep and flashed again using qtip with alchohol over hole to get it to write correctly...

Tools: circuit writer pen draw a conductive layer at the bottom of the drill you made, this will connect the cut traces and probably solve the problems (no eject, no spin ... etc. meaning you unlocked your drive but went a bit far) however try not to fill the whole thing as you may short...

my drive is Liteon DG-16D4S 0225 After I made a kamikaze I had an no eject, I tried the POUT fix and it worked fine. However, now I got open tray error and disk is not spinning :confused:. I think other components are moving well. I read somewhere that I should have removed the laser ribbon...

hi there.. i'm having a few problems with my new tx pcb. this is what happend At the first attempt of flashing the pcb, everything worked fine. I've followed the step by stpe guide and i was able to play all my games. Everything ok, then i was playing portal 2 and the tv screen went black, then...

i was pot tweaking my drive and i think my multimeter is bad in my frustration i turned both screws and need to know what the other screw the wrong one should be set at thanks for any help:facepalm:

I do Kamikaze and not everything went ok... probably :p I unlock SPI lock, flashed 1.91, lock down again. After that tray open and close but when plugged into XB disc motor not spinning... Only laser try to check two times but without result. Next what I can see is "Open tray"... :facepalm...

pain to do. So first time soldering and first time using a dremel but not by any means first time flashing, calculated lines and soldered the 100 ohm resister, already had a full OFW from 9504, but decided to do the slim key regardless. it failed, so i decided to go straight into vendor mode to...

Hello, I've recently installed the xecuter PCB in my Lite-On DG-16D4S. I've updated the Dashboard version to 13146. I believe I've successfully updated the firmware to LT+ 1.9 0272 version. I keep getting an open tray reading for my disc drive when connected to my xbox. I've tried using...

Hello guys, I flashed a friend's Samsung MS28 from LT FW to the Stock FW I dumped months ago so he could update. So the update went successful, however No Discs will boot now!!! I tried the Halo Reach disc given to update beta testers, and it was a no go, it says "Open Tray." Then, I tried...

Alright, down to it, I just finished flashing my xbox liteon 74850 with the 360usb pro, Probe 3 and connectivity kit, everything went fine (there was a cd in the drive during flashing) and I removed the ribbon before I started. so I got the dummy.bin, everything was successful (yay!), so I put...

Okay.. So I have a modded Xbox Elite 360 -iXtreme 1.51 BenQ drive. Whenever I place an original Xbox game into the Xbox it reads the disk without error. However, whenever I put in a game backup (I USE ONLY VERBATIM) it "reads" and then goes on to tell me to open tray. I open the tray and then...

So I flashed my lite on 7 series. Used a kit. When i pressed the eject button it made a weird grinding type noise. So i held the button and it worked. everything went great. No i did not do the mra or cut traces. So i put a game in and I open tray. Turns out I have to move the laser. Works for...

so I've recently flashed my BenQ elite with ixtreme 1.6 using jungleflasher and everything was successful but when I place a burned game in the 360 I just get the Open Tray message. I ran both ISOs through ABX and they were both verified. I also made an Activate ISO and that disc is read just...