pcb

  1. TechFreak2516

    Will this pcb unlocked work?

    I have already recived the the keys and saved all the info from my liteon dg-16d4s dvd drive.It has the mxic chip running firmware version 0272.I have 17 dollars left total to spend.i have already purchased and recived my xecuter x360 usb pro v2 and i got the keys and all. And i have good...
  2. R

    RGH E71 on retail nand dual nand mechanical switch :(

    Hi to all! I'm an italian modder and I love to make experiments and low cost solutions ;) I've already tried to fix the problem that I'm going to explain you in out country major forums without a fix :( I really hope to fix it cause I want this mod so much ;) Let begin!!!! Trinity 16747...
  3. K

    LITEON DG-16D4S - SLIM Kamikazi Lite-On DG-16D4S PCB Compatable with FW 9504 0225 0272?

    I was wondering if I have a kamikaze Slim Lite-on DG-16D4S PCB board can I use it as a replacement PCB for FW 9504 / 0225 / 0272 drives if I flash it with the right Dummy.bin? Thanks
  4. M

    missing dvd key and old pcb board broken

    hi everyone, I'm kindly new but I have a issue with my xbox 360. I have a new dvd drive but needed to be flashed with the old dvd key from the older board pcb. but, the old pcb is burned where is the sata adapter and the connector is broken... and I cant extract the dvd key for flashing my new...
  5. E

    LITEON DG-16D4S - SLIM Blown drive.. No key. What are my options?

    Hello, I inherited a broken 360s from my brother. The DVD drive (Liteon 0225) has a blown PCB with visible damage on the surface. I was wondering what I can do from this point.. I have no dumps/keys or anything of that sort. I was looking at this...
  6. W

    Broken pcb and lost key

    Okey, I was going to do a kamikaze mod by myself on my dg16d4s winbond driver. I've flashed several drives before but never done kamikaze. Before I started I extracted my key so if something went wrong I would be safe. And I did brick my pcb, I was going to remove the epoxyglue around the chip...
  7. L

    LITEON DG-16D4S - SLIM Replacment PCB V1.1 trouble connecting

    I have a replacment PCB v1.1 and when I am putting it together, where you connect the power and cut the cables. When I put them in they come out and when I put them in they get bent etc. The drive won't eject, without the power of the drive. How could I connect these cables correctly here is a...
  8. D

    X360USBPRO V2 + LTU PCB Boards for 2 Diff Slims ADVICE/HELP

    Hi, I don't know if this is the exact forum that I need to ask this question in, but if it isn't, a mod can move it for me. I apologize in advance for sounding like a complete n00b. I am pretty tech savvy, as I am in IT field anyways. Just new at flashing the whole extracting/writing to these...
  9. ibrahim11

    GOOD NEWS!!! - TX Liteon DG-16D5S - Replacement PCB 1175+ PRE-ORDERS UK!!!!

    Just got notified on twitter by XCONSOLES that ck3.co.uk are accepting pre-orders. FIRST COME FIRST SERVED basis. LIMITED STOCK only 100. 99 Left. UPDATE : 94 LEFT UPDATE : 92 LEFT UPDATE : 91 LEFT UPDATE : 87 LEFT I am first in que. YAY:cool2: :D Price is £43.75 $69.49 = £43.77 Hope...
  10. T

    LITEON 9504 Replacement of Drives

    Hey, so i had a busted 164DS Drive with 1017 F/W and A0B0 hardware, (drive got broken in a fight and the Xbox was given to me) so i bought a 164DS 9504 F/W and A0A0 hardware. I got that yesterday and decided to replace the PCB from the old one into the new one. Hoping the drive would then open...
  11. X

    Need help with bad mxic flash please

    Hey im not sure if this is where i post my question but here goes i was flashing a liteon 16D4S 1071 and all seemed to go well i soldered a pcb addon switch in place kinda messed up the trace where the cut was made but jf log shows everything went smooth and when i plugged up the drive ive been...
  12. iomega311

    LITEON 0225 Help with 0225 PCB - Can't extract FW

    I have an 0225 drive that I got from someone who messed it up somehow. They tried the kamakazi hack without getting the dummy.bin files first. I am not sure if they messed up the Kamakazi hack or not. Maybe they did, but I have not done one before, so I can't be certain. It is also a...
  13. iomega311

    What can I buy or do to use my Xbox DVD drive again?

    I have an Xbox Slim with a fried DVD drive board. It got plugged in upside down by the previous owner. Aside from that, it seems to work just fine. It had a 0225 drive in it, but after the board got fried, the previous owner took it out to try and fix it, ended up just getting rid of it. So...
  14. A

    LITEON 0225 DVD drive error

    Last night I installed Xecuter's Liteon DG-16D4S 0225 Unlocked PCB on my 360 Slim, and flashed it with JF 1.90 and LT+ v2.0. This morning it worked fine when I installed a backup of King of Fighters XIII, and I played it for about 2 hours. After that I tried installing COD MW3, but halfway...
  15. U

    LITEON 9504 Help plz

    I'm kinda new to this whole concept, so please be patient with me. I have completely removed everything to the DVD drive( it is .... Model:DG-16D4S FW Ver.: 9504) I hooked up the sata cable from the drive into my computer and i powered it. I read in many places with this type of drive you DON'T...
  16. T

    LITEON 0225 Kamakaze Failed (Need Options)

    Afternoon, fellas. I have a slim with 16D4S 0225 drive. Customer wanted to play backup games. Researched methods, PCB replace or Kamakaze to enable R/W... Kamakaze'd drive, went too deep. Did not extract key as the guides I had read did not mention SlimKey method. Now drive will not...
  17. S

    LITEON DG-16D4S - SLIM TX Liteon DG-16D4S Unlock PCB DEAD

    Hi All, I have just fitted a Xecuter Liteon DG-16D4S Unlock PCB to my 0225 drive. Naturally these boards are easy to fit and you can't really go wrong but . . . .Since fitting the PCB when I power the drive nothing happens, I can't eject and I don't hear any motions coming from the drive at...
  18. Z

    LITEON 9504 Replacement pcb problem

    I got the pcb from ck3.co.uk and when i removed the wires from the old pcb and solder them directly on the new(didn't use the small board i know how to solder didnt need it) and connect everything back, so i can connect the drive on the pc and flash it , my computer couldn't find the drive i...
  19. U

    Replacement PCB broken/not genuine? [PICS]

    Hi, I finally managed to extract key information from 0401 using ICH8. I also flashed LT+1.92 to my Replacement PCB (see logs and pictures below). Drive eject works and xbox dash shows correct drive status (tray open, etc.). The problem is, that the drive won't play any Discs be it originals...
  20. X

    tray problem flashed 0225u pcb help please

    thank you all for help specially to austinthegreate i Inspect the tx pcb for solder excess or bridges i found a solder smal bridge between a green and yellow i remove it now all ok no problem thanks again. hi can any one help please i have replaced the pcb and flash it (I have flashed...