r-jtag

  1. P

    R-JTAG Jasper 16MB only booted Xell once - after that only 3RROD 0010 directly after boot

    Last week I decided to go for the R-JTAG solution and ordered: R-JTAG starter kit J-R Programmer V2 from consolepro.nl (official reseller). Console Type: Jasper NAND size: 16MB Dashboard version: 2.0.16537 CB version: 6754 Screenshot of NAND details from J-Runner: J-Runner log...
  2. zathoraus

    R-JTAG Looking for either R-JTAG Kit v.1 Or R-JTAG chip itself.

    I'm looking to buy 2-3 R-JTAG kits or R-JTAG chip.
  3. M

    R-JTAG falcon red ring befor xell reloaded boot

    Console Type:Falcon NAND size: 16 Dashboard version: 16537 CB version: 5774 updflash.bin log (if applicable):? just ask if u need it Description of problem:wrote xell reloaded to nand started up console starts to glitch the three red rings come on ran rattler here the log Phat Selected...
  4. F

    R-JTAG JRunner: manufacturer for code 21 not found (R-Jtag + DemoN)

    Hi, i'm from Germany, so please excuse my bad english. I installed the "Xecuter DemoN" in combination with a "R-Jtag Starter Kit" , on my XBox 360 phat (Jasper 516mb mainboard/Dashboard:16547) -Demon works fine -> can read the Demon Nand -Xbox starts normally, if i toogle to the Xbox360-Nand But...
  5. A

    R-JTAG Zephyr v2.0 will not boot

    Console Type: Zephyr (Halo 3 edition green Xbox) NAND size: 16mb Dashboard version: e.g 2.0.16537 CB version: 4569 Screenshot of NAND details from J-Runner: See Attached Was the console working before you started: Yes J-Runner log: - I don't have a JR programmer, I am using LPT flash method...
  6. Y

    R-JTAG sooo almost there! but please help

    (i have the r-jtag ultimate kit) hi guys i have practically r-jtagged my 360 but trying to read the nand and i get a ton of errors and it seems they are errors reading EVERY block whats the reasoning for this? is it my soldering? also im under the impression that installing the jtag alt v2 QSB...
  7. M

    FIXED No POST output

    Console Type: Jasper NAND size: 16 Dashboard version: 2.0.16537 CB version: 6732 Screenshot of NAND details from J-Runner: J-Runner log: =================================================== 12 November 2013 20:54:08 J-Runner v0.3 Beta (2) Started WARNING! - Your selected working directory...
  8. S

    R-JTAG Noob question about R-jtag

    Hey I'm new to any sort of Rgh/Jtag and I ordered the R-jtag starter kit because I already have a nand-x. I need to know if I am going to have everything I need to do the r-jtag with just having the starter kit and nand-x. Do I NEED J-Programmer or will the nand-x do fine? I've already read my...
  9. B

    Cant find a R-JTAG for sale.....

    I've tried looking for an R-JTAG starter kit but I can no longer find it on CK3.co.uk, Mr Modchips and I've never known Kanection to have any amount of decent stock for modding.... if anyone can point me in the right direction for a 'R-JTAG Starter kit' just so I don't feel like I'm losing my...
  10. P

    R-JTAG Falcon, R-JTAG, and RROD 0010.

    Console Type: Falcon NAND size: no idea, the nanddump bin size is 16,5 MB Dashboard version: the newest CB version: 5774 Screenshot of NAND details from J-Runner: nand info attached J-Runner log: =================================================== 6. marraskuuta 2013 14:35:26 J-Runner v0.3 Beta...
  11. 01DawG10

    R-JTAG External HDD setup

    Good day fellow Xbox'ers :) Hope all is well. I purchased my first ever Xbox 360, Arcade (I think), 20gb, Falcon for about $50, but the DVD drive did not read discs.. After some scratching I found the guy hit the drive (very hard :O) because it did not want to read discs.. Managed to get it...
  12. H

    R-JTAG Falcon booting Xell but not Dashboard

    Hi everybody, here is my problem. Console Type: Falcon NAND size: 16 Dashboard version: 2.0.16537 CB version: 5770 Screenshot of NAND details from J-Runner: Description of problem: My problem is that my Falcon starts Xell succesfully (using the Xell written image) or the eject button but...
  13. W

    Need some R-Jtag Basic info

    Hello All! I have been out of the game for while. I have tried to get the info myself but have some holes in my research. I would like to R-Jtag my Jasper and need to know what Hardware I need. I Would like to have the dual nand so I can play off the HDD and play online with a burnt disc...
  14. B

    R-JTAG Falcon, while trying to get to XeLL, E79

    Console Type: Falcon NAND size: 16 Dashboard version: 2.0.16202 CB version: 5774 Screenshot of NAND details from J-Runner: http://puu.sh/4G3SO.png J-Runner log: Checking Files Falcon Manually Selected Finished Checking Files Version: 10 Flash Config: 0x01198010 01198010 Xenon, Zephyr, Opus...
  15. I

    Jasper R-JTAG RROD 0010; & Flash Config 0x00000000; No boot

    TX Product(s) used: R-JTAG (Ultimate) 1.1, (Also have an LT+ Switch in normal mode) Console Type: Jasper NAND size: 512 I think Dashboard version: Whatever the newest one is. CB version: unknown Screenshot of NAND details from J-Runner: Description of problem: RROD with error code 0010 when...
  16. M

    FIXED R-JTAG + Demon > SB Jasper does not glitch, cannot get XELL to run.

    Console Type: Jasper NAND size: 16 Dashboard version: 2.0.16203 CB version: 6754 Screenshot of NAND details from J-Runner: J-Runner log: POST output from J-Runner (either POST_OUT monitor or RATER output): Post 01 Post 80 Post 10 - Payload/1BL started Post 11 - FSB_CONFIG_PHY_CONTROL Post...
  17. F

    HDD not showing up!

    Hello I have run into a problem just yesterday I finished my Demon install on my Jasper phat and I was very happy but when I put my HDD in it is recognized by FSD but it is not recognized by retail side. So I uninstalled FSD 3 and dashlaunch from my HDD and moved them to my external hdd and...
  18. D

    FIXED Falcon R-JTAG not booting Xell Post A0 - Panic - VERIFY_SECOTP_6

    TX Product(s) used: J-R Programmer, R-JTAG 1.1 Console Type: Falcon Dashboard version: 2.0.14699 CB version: 5770 Was the console working before you started: Y Description of problem: I have read my Nand fine and they all match. I have created xell works fine. I have then written xell fine...
  19. C

    R-JTAG just will not glitch or boot

    TX Product(s) used: J-R Programmer 2 - R-JTAG Console Type: Jasper NAND size: 512 Dashboard version: 2.0.15574.0 CB version: 6754 Screenshot of NAND details from J-Runner: J-Runner log: updflash.bin log (if applicable): Image of Coolrunner: Images of close-up soldering to motherboard...
  20. U

    JTAG J-Runner Nand Reading problem: completes reading of only 1 nand

    I am having a problem reading the nand in J-runner. The first nand seems to be running fine (with 2 block errors; according to some posts i've read, that should not be a problem), but the second nand gives a "can not continue" error, and does not continue the second read. I am fairly sure i...