rgh2

  1. L

    RGH NAND Wire for JR Programmer V2?

    Hey, I got a JR Programmer V2 recently however the wire to solder onto the Xbox MB (carrying out a RGH2) is missing. Here is a picture of the wire which I'm missing: https://ibb.co/n7sH5x Anyone know what this wire is called / where I can buy one? - Many thanks.
  2. N

    RGH RGH2 - Jasper 16MB, booted Xell, booted hacked image once, no boots so far...

    Hello, I am trying to glitch a Jasper, but I was only able to boot Xell and once managed to boot the hacked image. First some info and at the end pictures of my soldering. Model: Jasper 16MB CB: 6754 (generated hacked image with J-runner is 6752) Dash: 17150 (generated hacked image is 17511)...
  3. N

    RGH2 - Jasper 16MB, booted Xell, booted hacked image once, no boots so far...

    Hello, I am trying to glitch a Jasper, but I was only able to boot Xell and once managed to boot the hacked image. First some info and at the end pictures of my soldering. Model: Jasper 16MB (Phat) CB: 6754 (generated hacked image with J-runner is 6752) Dash: 17150 (generated hacked image is...
  4. T

    TRINITY CR4 XL QSB Question and NAND Read Question

    Console Type: Trinity Programmer Used: Will be using the Demon w/ JRunner v.3 beta NAND Size: 16 Dashboard version: Not sure Was the console working before you started: Y I'm installing a demon slim and a CR4 XL in a Trinity that was running retail when I started. I'm using the v3 QSB for the...
  5. I

    SLIM CORONA V3 250GB

    Hello everybody, I hope you all are having a great day. Anyways, I've been reading and learning everything about JTAG/RGH/RGH2. I am well ready to get started and purchase the items to install on my CORONA V3 motherboard. This forum is to clarify if the items I listed are correct for SLIM...
  6. K

    New need help

    Im new to this and was wondering if i buy the JR Programmer V2 and the Coolrunner Rev C for my falcon is this all i would need to rgh and also by using these products would it be RGH1, RGH2 or would it be a R-Jtag? also im on dash 2.0.16756.0 should i keep it there or update to the current...
  7. H

    RGH Phat Demon chip installed on Trinity wont boot

    Symptoms: Xbox doesn'tboot Demon or Retail nand. When I power on the Xbox the fan/lights don't come on, I only get the start up sound. If I remove WP, WE, ALE CLE, CE & RE I can boot Xbox nand. (Retail or RGH2) The Xbox nand boots whether the Demon tactile button is switched to Demon or Xbox...
  8. K

    [WANTED] Advice on Red dot...

    Xbox 360 slim Trinity With Demon Dual Nand. It got the red dot last night for the first time. But now its working fine. Ive noticed it takes a little longer to boot up on the stock nand. Correct me if im wrong, I believe that it is something to do with the cpu/gpu overheating? Its nothing to...
  9. N

    COOLRUNNER XBOX WONT BOOT AFTER RUNNING updflash.bin ON XELL

    I'm having trouble starting my Xbox, after I ran updflash.bin in xell (blue screen). The xbox doesnt boot and the coolrunners (cr3lite) green light is not flashing, but it flashed before the updflash.bin MB Jasper 16mb, dash 16747 (at least it was), and i'm using cr3lite rev. C chip, with RGH2...
  10. K

    FS3 problem...

    Hi, Just a little problem. I got FS3 installed boots fine. Boots games fine. Once I'm in a game and I hit the big "X" then "Y" to go back to FS3 but it just sits at a black screen. I have to turn it off and back on again to get back into FS3. Games are on a HDD. FS3 & Dash Launch are on the...
  11. J

    TRINITY pesky Trinity won't boot cr4

    OK so I've had a few problems and some bad luck with this trinity. I got my first cr4 a while back and I had it booting xell and there was a party at my house and someone curiously picked up my board and ripped a couple points off the chip but long story short he payed for a new cr4. So while...
  12. L

    FIXED Upgrade from CR3 Lite to CR4 XL

    So after finding out my other glitch chip was a fake I decided to upgrade to an official CR4. I just finished wiring it all in, adjusted the setting and booted it on to find no successful glitch. I realized I would probably need to rewrite the image to be compatiable with the CR4. Ive made an...
  13. S

    Jasper RGH2 NO GLITCH UPDATE LDV 0022

    Hi, id appreciate any help here im stuck. I got a Jasper 16mb console to RGH2, i dumped Nand 4 times all matched no bad blocks and continued to fit cr3 lite. Had every single variable possible to get it to glitch but nothing i done made any difference. Been trying to glitch it for around 12...
  14. F

    RGH Can I go online with RGH if I do no mods or hacks?

    Hello everyone! I have a bit of a problem (excuse me I'm a noob) but I have lost my original DVD drive with its key (its a phat liteon) and I think I'll have to rgh to recover the DVD key for my replacement, but, with the rgh, will I still be able to go online (I don't plan on doing any hacks or...
  15. J

    RGH Do i need a double shielded cable for the RGH 2 mod?

    I am looking to do a RGH 2 mod and I have the cool runner and all the cables EXCEPT the double shielded cable :( Do i need this or is there another way to get around this? I have been spending all morning looking around the internet and I've read from a couple people that its not necessary for...
  16. S

    RGH Is the RGH1 the same as RGH2

    I have a Trinity motherboard (Slim) and it is on the most current dashboard, so I know that the only way to RGH it is to do a RGH2. Is the RGH2 the same procedure as the RGH1? As far as soldering? Is there a guide to follow? Thanks.
  17. D

    Fried something trying to achieve RGH2 on Falcon?!

    Hi. A week ago i bought a XBox 360(Falcon v1, Dash 2.0.16756, CB5774) and read a few days about whats going on and how to modify those. My previous experience was the original XBox with TSOP flash which was pretty easy compared to the current RGH. However i gave it a try and now im scared that...
  18. U

    Coolrunner rev c r4b24 damaged, pro required to fix

    I have a Jasper 16mb nand for rgh2. and everything seems completely fine, but the r4b24 pad seems to be damaged and the xbox refuses to turn on. The reason the orange wire isn't there is because it fell off and I didn't think it would be a great idea to try to solder it when it is messed up...
  19. S

    Need Help

    I am new to the threads i have been reading quite a bit on how to do a RGH2 on my Jasper 512mb, i have followed the steps and done everything it says. But i still get no luck on getting xell to boot to get my cpukey or even get it to glitch. I go in and read the nand 4 times and compare them all...
  20. E

    A Jasper 512MB which booted to RGH2 but now it shows 0022

    TX Product(s) used:j-programmer v2, Coolrunner rev C Console Type: Jasper NAND size: 512 Dashboard version: 2.0.15574 CB version: 6754 Screenshot of NAND details from J-Runner: J-Runner log: Checking Files Finished Checking Files Downloaded *xeBuild/16547/_glitch2.ini Downloaded...