xell

  1. E

    Xell Reloaded Freeze

    Hi I've recently had my XBOX 360e 250Gb modded with a Demon and CR3 Pro I can glitch and can dump/flash nand with the demon but when loading Xell Reloaded v0993 it gets stuck just after SATA device at ea001300 * sata dvd init ATAPI inquiry model: HL-DT-STDVD-ROM DL10N SATA device at ea001200...
  2. H

    R-JTAG Falcon booting Xell but not Dashboard

    Hi everybody, here is my problem. Console Type: Falcon NAND size: 16 Dashboard version: 2.0.16537 CB version: 5770 Screenshot of NAND details from J-Runner: Description of problem: My problem is that my Falcon starts Xell succesfully (using the Xell written image) or the eject button but...
  3. B

    R-JTAG Falcon, while trying to get to XeLL, E79

    Console Type: Falcon NAND size: 16 Dashboard version: 2.0.16202 CB version: 5774 Screenshot of NAND details from J-Runner: http://puu.sh/4G3SO.png J-Runner log: Checking Files Falcon Manually Selected Finished Checking Files Version: 10 Flash Config: 0x01198010 01198010 Xenon, Zephyr, Opus...
  4. D

    FIXED Falcon R-JTAG not booting Xell Post A0 - Panic - VERIFY_SECOTP_6

    TX Product(s) used: J-R Programmer, R-JTAG 1.1 Console Type: Falcon Dashboard version: 2.0.14699 CB version: 5770 Was the console working before you started: Y Description of problem: I have read my Nand fine and they all match. I have created xell works fine. I have then written xell fine...
  5. D

    FIXED HELP !! CPU/DVD key with TX Corona 4GB NAND RW KIT V4 and DGX v1.1s

    This is my first post ever so please be kind if its posted in the wrong place or anything like that. im having trouble booting to xell i have soldered everything as needed, i already extracted my NAND files and this is my first time ever attempting this all my previous xbox work has been on fats...
  6. C

    Rater Waiting for post to change? No Xell Boot and 3 rrod

    So i recently installed my rjtag ultimate kit and for some reason the rater wont go past Waiting for post to change. I get a rrod when it turns on as well. Also i dont get a xell screen. ive messed with all the dip settings 1-6 and had 8 on the whole time. Tried standard voltage and now im in...
  7. L

    Unable to first-time boot to Xell on BB Jasper. Wiring all seems correct (With Pics)

    Hey everyone, I'm having some trouble with a BB Jasper I'm working on. I can't get it to boot to Xell. My first question: If I still have the wires for the Nand-X soldered to the board, but not connected to the Nand-X, will that affect a first time boot into Xell? It seems like it shouldn't...
  8. A

    RGH Slim Trinity Xell: Boot problems

    Product used: Digilent C-mod XC2C64A rev. E Console Type: Trinity, Homemade GliGli Modchip LPT Programmer, Homemade LPT Nand reader (nandpro) NAND size: 16 Dashboard version: 2.0.13604 CB version: e.g 9188 Flash Config: 00023010 Was the console working before you started: Yes Steps: 1 - Made...
  9. ScrubbaDubby

    FIXED Easy Fast Booting Trinity Fix

    ***This is only an improved guide that bmonier made, it was difficult to read and understand and also had no pictures. His original post can be found here http://team-xecuter.com/forums/showthread.php?t=97931 I have only taken the time to rewrite it and take pictures. Credit also goes to MartinC...
  10. A

    JTAG Sllim Trinity Red light/xell

    Console Type: Trinity NAND size: 16 Dashboard version: e.g 2.0.13604 CB version: 9188 Hey so my friend has slim trinity that he wanted to have me hack for him for Christmas he had tried it himself and messed up some pads and gave up. So what Iv done so far is repair the pads and Iv was able...
  11. B

    Can't Boot XELL, LED on coolrunner doesn't flash when glitching

    Okay so after my first mishap I decided to take my time and do things properly. I installed the coolrunner and demon in my other xbox flashed them both, took 4 NAND Dumps, 4 from DEMON and 4 from XBOX 360. I use the xbox nand to create an .ecc with the right dash. I then booted the xbox in...
  12. ppkpatrick

    RGH Trinity w/ CR3 Lite woon't boot Xell

    [FIXED] Trinity w/ CR3 Lite woon't boot Xell Have a trinity (dash 14719) which i'm installing a demon and cr3 lite in.This is my first demon install and it went fine,demon works perfect(reads,writes,toggles nand,flashes coolrunner,etc.)My problem is the coolrunner side of things.I can't get the...
  13. R

    RGH Falcon 5771 - 0001 code after CR install

    Hi, First off - great forum!! joined today but have been using it for knowledge for quite some time now and it rocks. Now to the problem - I have a flashed falcon 5771 and sometime ago I decided to go and perform the RGH hack on it and that is where I am at right now... After doing a lot of...
  14. gableroux

    RGH Stuck on update, e66 fix with rgh?

    Hello all, I'm about to buy a console from a friend, he has an old flashed xbox and the previous owner did update the dash and got stuck on the update. I think the console now fails to boot with e66 (still not sure, haven't seen it yet). Is it possible to fix the console by doing rgh and boot...
  15. N

    Falcon problem

    hello Guys, I have a falcon box it which has 14719 dashboard CB 5773 LV13. I read the hand there is 2 (44, 66) bad block on all the 3 nanddump. I create then the xell and load it into the box. Then its boot to xell however the boot time is very long. After this I create the hand image with...
  16. K

    Cannot Boot Xell! Help Plz!!!

    So I have a xenon motherboard which had the dashboard before 7371. I decided to jtag it with the nand x kit, I put pin headers for nand and QSB (Quick Solder Boards) for the jtag part. Once I finished I read the nand and got 3 perfect mathes. I then continued in writing in the Xell. When it...
  17. S

    Xell screen wont load after writing ECC file (using J-runner)

    Hi there. To this point I have been successful in soldering the post QSB, dumping the nand and writing (to the nand) the ECC file using j-runner 267. I have had no errors doing the above, following the J-runner tutorial. My console is the trinity slim with the 14719 dash. The problem is...
  18. A

    Trinity 14719 Xell not loading

    I made an RGH yesterday and everything was fine I am doing an RGH now but I cannot load xell, the only difference is that I updated to new Jrunner 267 I read the nand using nandX jrunner showed they have no difference I checked it with Xnandhealer there were no bad blocks. I have no problems...
  19. E

    xell cpu key wont work in jtag tool

    Ok used nandx to dump my nand used jtag tool to compare dumps and i had 0 bad blocks so i flashed xell and booted xbox to get cpu key i took a pic and fuse set 3 ,5 will not work so i dumped nand again and 0 bad blocks so flashed xell again and tried 3,5 fuse set and it was not correct so i...
  20. K

    RGH Cant Boot into Xell Black screen

    *MAKE SURE TO READ THE STUFF AT THE VERY BOTTOM TO THANKS :D* Alright guys just finished soldering my Falcon RGH Dumped my nand twice both matched programmed the Coolrunner fine, created and then wrote the ECC file to the Xbox 360 but here is the problem. When the Xbox is off there are no LEDs...