0020 RROD after RGH2 Falcon DualNand

A

ablegepu

VIP Member
Jan 3, 2014
925
0
Alabama U.S
Re: RGH2 & DEMON First Time.. Please Help

you mean what xsvf file? just make sure you check demon installed and use the rgh2 falcon xsvf file
 
HashtagTurner

HashtagTurner

BANNED
Mar 10, 2013
18
0
Re: RGH2 & DEMON First Time.. Please Help

ablegepu said:
you mean what xsvf file? just make sure you check demon installed and use the rgh2 falcon xsvf file
Click to expand...
Alright I did that
===================================================
Saturday, May 31, 2014 11:25:05 PM


J-Runner v0.3 Beta (4) Started




WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button




Checking Files
Finished Checking Files
RGH2 Selected
Programming Coolrunner
C:\Users\Turner\Desktop\common\xsvf\falconrgh2.xsvf
sending xsvf to demon...
Done
Programming Coolrunner
C:\Users\Turner\Desktop\common\xsvf\falconrgh2.xsvf
sending xsvf to demon...
Done


Now ill wait about 10-15 mins to see what happens.
am I supposed to boot to xell from the power button or the eject
 
HashtagTurner

HashtagTurner

BANNED
Mar 10, 2013
18
0
Re: RGH2 & DEMON First Time.. Please Help

ablegepu said:
you mean what xsvf file? just make sure you check demon installed and use the rgh2 falcon xsvf file
Click to expand...
oh my god. was I supposed to be using the hdmi cable or the av cable ? I know the console wont boot if it doesnt detect the right source
 
A

ablegepu

VIP Member
Jan 3, 2014
925
0
Alabama U.S
Re: RGH2 & DEMON First Time.. Please Help

it don't matter if you have flashed ecc to the demon just make sure the blue light is on (DEMON NAND SELECTED)

either cable should be fine, xell is made to use both
 
Last edited:
HashtagTurner

HashtagTurner

BANNED
Mar 10, 2013
18
0
Re: RGH2 & DEMON First Time.. Please Help

ablegepu said:
it don't matter if you have flashed ecc to the demon just make sure the blue light is on (DEMON NAND SELECTED)
Click to expand...
yep I am just watching it glitch over and over and over and over .-. blue light on in the front and everything. If I click button and turn off blue light it wont boot unless i turn the coolrunner to prg
 
G

gavin_darkglide

VIP Member
Dec 14, 2012
2,303
118
Re: RGH2 & DEMON First Time.. Please Help

ablegepu said:
you mean what xsvf file? just make sure you check demon installed and use the rgh2 falcon xsvf file
Click to expand...
The falcon rgh2 xsvf does not support the demon, I used to use this on my jasper before I installed the demon, after I installed the demon I had to use timing file C. Then I upgraded to r-jtag.
 
  • Like
Reactions: ablegepu
A

ablegepu

VIP Member
Jan 3, 2014
925
0
Alabama U.S
Re: RGH2 & DEMON First Time.. Please Help

you don't hit the nand select button mid-boot you need to shut down then select nand. and if you have the cr_en ribbon cable attached to the coolrunner and the demon it should boot the stock nand in normal mode (you shouldn't have to flip the switch to program). im not sure about the falcon xsvf files so i assumed try it with that one first try what gavin said (though every console is different)
 
HashtagTurner

HashtagTurner

BANNED
Mar 10, 2013
18
0
Re: RGH2 & DEMON First Time.. Please Help

gavin_darkglide said:
The falcon rgh2 xsvf does not support the demon, I used to use this on my jasper before I installed the demon, after I installed the demon I had to use timing file C. Then I upgraded to r-jtag.
Click to expand...
thank you I will try this Ive been sitting on it glitching the falcon xsvf for 40m -.-
 
HashtagTurner

HashtagTurner

BANNED
Mar 10, 2013
18
0
Re: RGH2 & DEMON First Time.. Please Help

ablegepu said:
you don't hit the nand select button mid-boot you need to shut down then select nand. and if you have the cr_en ribbon cable attached to the coolrunner and the demon it should boot the stock nand in normal mode (you shouldn't have to flip the switch to program). im not sure about the falcon xsvf files so i assumed try it with that one first try what gavin said (though every console is different)
Click to expand...
I didnt mean I was doing while it was on lol im not crazy. I dont have the cable attatched but what I was saying was when I turn it off and click the button back to retail it wont power on when the glitch chip is in nor mode and only in prg mode, that will be a problem when I put it back together

edit : by power on I mean boot up , the green light comes on but nothing happened while in nor mode only prg it boots
 
Last edited:
A

ablegepu

VIP Member
Jan 3, 2014
925
0
Alabama U.S
Re: RGH2 & DEMON First Time.. Please Help

with demon installed ticked in jrunner and the small ribbon cable hooked up to the coolrunner and the demon it should boot stock on normal when you select onboard nand (XBOX360 NAND). oh i just read something that said either try c or b rgh2 wth demon installed ticked
 
A

ablegepu

VIP Member
Jan 3, 2014
925
0
Alabama U.S
Re: RGH2 & DEMON First Time.. Please Help

cr_en = coolrunner enable/disable so if your cable is installed correctly and you have a demon enabled xsvf file flashed then when you switch nands it will enable or disable the coolrunner, just like the prg/nor switch
 
HashtagTurner

HashtagTurner

BANNED
Mar 10, 2013
18
0
Re: RGH2 & DEMON First Time.. Please Help

ablegepu said:
with demon installed ticked in jrunner and the small ribbon cable hooked up to the coolrunner and the demon it should boot stock on normal when you select onboard nand (XBOX360 NAND). oh i just read something that said either try c or b rgh2 wth demon installed ticked
Click to expand...
thanks bro it never booted in 40m on c so ill try b . Should I use the double coated cabbie instead of the blue for the CPU rst on the bottom of the mobo
 
A

ablegepu

VIP Member
Jan 3, 2014
925
0
Alabama U.S
Re: RGH2 & DEMON First Time.. Please Help

yeah you can if you think your soldering is questionable. I shouldn't even be helping seeing as you have a clone and they only work less than half of the time.
But if you really want to use the double shielded cable you need to follow THIS tutorial. and when you are finished with it please hit the thanks button at the end of the tutorial for (WNYConsoles). They made the tut. and saved me a LOT of time explaining the process to you.


yAy my first hyperlink EVER!!! DOn't LAugh It AiNt FuNnY:mad2:
 
HashtagTurner

HashtagTurner

BANNED
Mar 10, 2013
18
0
Re: RGH2 & DEMON First Time.. Please Help

Yea f this I just bought a genuine so I don't have to take the other one out of my rgh .-. I saw a couple other bad reviews saying it was defective and I asked for new chip or I will charge back

i boug one of these about 10 mins ago http://www.ebay.com/itm/291143553904
 
A

ablegepu

VIP Member
Jan 3, 2014
925
0
Alabama U.S
Re: RGH2 & DEMON First Time.. Please Help

dude why would you buy them from ebay??? it says




​

[h=1]GENUINE TEAM XECUTER COOL RUNNER REV C XILINX XC2C64A[/h]

that is what makes it a clone... if the big chip says xilinx it's a fake. tx brands their product on that chip with cr or cr3 or a little running man on the chip. if you receive it and it has one of these things on the big chip... you got lucky.. otherwise it will say

xilinx
XC2C64A

 
Oggy

Oggy

Staff member
Troll Eating Dogs
Mar 1, 2010
3,346
128
Re: RGH2 & DEMON First Time.. Please Help

im not helping as you have a clone...

proceeds to 2 pages of support

lolzies
 
You must log in or register to reply here.