RGH 0022 error confused on answers I have found

[bladez360]

This is how it started
I got a falcon xbox that is very tricky on glitching
would take up 2 a min to glitch
its was freezing a bit
So I decided to take it apart and reflow it
Well reflow was succesful console boots and and plays games no problem

Using the first rev of coolrunner
again glitch was working before just was being iffy it always went but could take up to a min

rewired everything wrote a 14699 gltiched nand
now getting a 0022 error it takes very long to come up
over 30 seconds

Write defaut 14699 nand and console boots no problems

I have read this is either invalid ldv which i double checked and they look fine
or bad stdy clk which i double checked and looks fine was going to try the alt later on

 

[Martin C]

Does it boot to XeLL when you press Eject?

 

[JayDee]

Have you soldered off r6t3 ?

If not, then it is likely a LDV issue and can be checked by increasing LDV by one (from the original value) in multibuilders options.ini

If it boots into xell, as Martin_C asks, then you can see the number of f´s on fuseset 07

 

[RavenPhoenix]

If it is taking a long time to glitch originally then it could be your wire routing and/or your soldering. However, first thing to determine is what is causing the 0022.

Please try to write your original image which was taking a while to glitch back to your nand and see if it is still working properly. If it is then recreate your 14699 freeboot image with your CPU key and your original stock nand dump.