0022 rrod on stock

[redcatex]

ok i done rgh on my jasper once it worked, took dvd key of falcone once, restored to stock it was flawless.

now i got jasper to rgh. messed coolrunner, today got new one rev b. but it was bad glitching, bridged cap points. and now there is no green light.

restored to stock got 0022.

tried on my jasper ntsc.

same thing happened bridged cap points no green light any more, stock nand shows 0022 after 5 seconds, definitely not ldv.

so is there is any thing how i can fix it. or cpu is dead. resistor on point A on motherboard is 10k still fine.

So please somebody can help me to fix this.

it's driving me crazy :crazy:

 

[BoSsLoBbYz]

power cycle a few times on the consoles then try booting. Make sure that the hana point is not touching any other points as well. If still no go try a different cool runner or reprogram the cool runner

 

[Krafter]

Was your Jasper gliched and working before you tried to put the new CR in it? If so then try disconnecting the CR when you boot with the stock nand and see if you still get the error. If the problem is following the CR then you "might" have a faulty one. If it's not and you still get the error then it's most likely in your soldering.

5s- issue with CPU_RST/CPU_PLL_BYPASS
15s - LDV
30s - GPU issue.

 

[redcatex]

Its already removed. It happened after integrated rev b cap. Debug light disapeared and thats all. Stock nand gives rrod 0022.

 

[Martin C]

How long does it take to 0022?

 

[kapastratos]

It seems that he have the same problem that I have...after he soldered the capacitor ... 0022 and you can`t do anything about it....sorry!

redcatex, please read this -> http://team-xecuter.com/forums/showthread.php?t=80476


Thank you.

 

[redcatex]

How long does it take to 0022?

5 seconds

 

[Martin C]

upload pics of all areas you've soldered to.