LITEON 0225 0225 lt2.0 to 3.0u problem!

[g2rules]

I have label 9504 but 0225 in jf. have tx pcb , usb pro, ck3 lite. Done successfully lt2.0u before.
Installed original pcb, upgraded dash via usb, flashed tx pcb now nor the original or backups play at all.
I tried flash with 3.0 and 3.0u same results , help please


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.92 Beta (304)
Session Started Sun Jan 22 16:14:39 2012

This is a 32 bit process running on 2 x 32 bit CPUs
X360USB PRO detected, Version 0.18

portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 5 I/O Ports.
Found 0 Com Ports.
Found 2 windows drives C: D:
Found 1 CD/DVD drives D:

Drive is Slim Lite-On..

Key found in KeyDB at record (1 - N/A)
Key is: CZ98A9A891D99BF85E1687C999D9043F
Key has been tested and verified, thanks C4eva !
Drive is Slim Lite-On..

Key found in KeyDB at record (1 - N/A)
Key is: CZ98A9A891D99BF85E1687C999D9043F
Key has been tested and verified, thanks C4eva !
Drive is Slim Lite-On..

Key found in KeyDB at record (1 - N/A)
Key is: CZ98A9A891D99BF85E1687C999D9043F
Key has been tested and verified, thanks C4eva !
Sending Vendor Intro to port 0x0000

Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0x8C
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes
Loading firmware file C:\Users\Dummy.bin
MD5 hash: b178911fc7e478f296c446c147486cc9
Inquiry string found
Identify string found
Drive key @ 0xA030 CZ98A9A891D99BF85E1687C999D9043F
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: SlimKey Extract
Auto-Loading firmware file C:\Users\JungleFlasher v0.1.92 Beta (304)\firmware\LTPlus-0225-v3.0.bin
MD5 hash: 1a38d3a2a6519339599fa1866642c513
Genuine LT plus v3.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: LT-Plus 3.0
Spoofing Target
DVD Key copied to target
Key Sector copied from Source to Target
Target is LT - ID strings not copied to Target

Spoofing Target
DVD Key already matches
Key Sector copied from Source to Target
Target is LT - ID strings not copied to Target
Serial data already matches

Loading firmware file C:\Users\JungleFlasher v0.1.92 Beta (304)\firmware\LTPlus-0225-v3.0u.bin
MD5 hash: db5c70eaaabb53501c2c4f53dce9abfd
Genuine LT plus v3.0 (9504 upgrade)
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: LT-Plus 3.0
Spoofing Target
DVD Key copied to target
Key Sector copied from Source to Target
Target is LT - ID strings not copied to Target

Sending Vendor Intro to port 0x0000

Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0x8C
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name: MXIC(MX25L2005)
Flash Size: 262144 bytes

Sending Spi UnLock request to Port 0x0000
.
Spi Status: 0x00

Getting Status from port 0x0000
SPi flash found with Status 0x72

Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................

Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !


Sending Spi Lock request to Port 0x0000
Spi Status: 0x8C
Sending Vendor Outro to port 0x0000
Sending Vendor Outro to port 0x0000
Drive is Slim Lite-On..

Key found in KeyDB at record (1 - N/A)
Key is: CZ98A9A891D99BF85E1687C999D9043F
Key has been tested and verified, thanks C4eva !

 

[Indestructable]

whats the error dirty disc?tray open???

 

[g2rules]

Original = Unrecognized disc
backup = "This disc is not supported" (example- Forza 4) it used to play in lt2.0

 

[Indestructable]

flash the tx board back to stock try origanal game

 

[add1cted]

I guess you know that you have to rewrite all your xgd3/ap25 discs.
With your original pcb...does your xbox read the original games?

 

[Argentum]

You have to reburn your game images after injecting them with the new topology data.
Old backups will not work on LT 3.0
Did you do this? how did you burn your games?

 

[g2rules]

Ok!! now after reboot magically the original and some backups are playing!
and i was not aware of reburnin games and injecting them with the new topology data! how do you do that?
or i guess i'll search in the forums!
Thanks guys!!!

 

[Indestructable]

run them through abgx latest version 1.0.6

 

[Argentum]

There is an excellent tut for ubeergeek somewhere in the forum I think it's a sticky it has everything you need on where to get topology data and inject it into images and burn

 

[x360ccm]

you must use the search button.

http://www.team-xecuter.com/forums/showthread.php?t=79171