LITEON DG-16D4S - SLIM 0225 Problems - Please help

M

mo175

Noob Account
Dec 6, 2011
3
0
I've flashed plenty of phats before and this is my first slim, it was a 0225 model so i ordered the sputnik switch, here is my installation:

it is a bit messy i know but it works.

I have a backup of my keys using the slimkey function, i then switched to "unlock" and tried to flash all was ok i had an spi status of 0x00 etc.. here is the log:
Code: 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.92 Beta (304)
Session Started Tue Jul 24 15:12:46 2012

This is a Wow 64 process running on 2 x 64 bit CPUs 
X360USB PRO detected, Version 0.18

portio64.sys Driver not Installed 
Found 3 I/O Ports.
Found 0 Com Ports.
Found 3 windows drives C: D: F:
Found 1 CD/DVD drives D:

Sending Vendor Intro to port 0x0000
Status 0x80
Re-sending Vendor Intro: 
................................................
Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name:  MXIC(MX25L2005)
Flash Size:  262144 bytes
Loading firmware file C:\Users\michael\Desktop\Mathews SLim 0225 ORIG FW\second copy\Dummy.bin
MD5 hash:  f23b5842e4b66c61b7e23fb721880ea5
Inquiry string found
Identify string found
Drive key @ 0xA030 91675CA521CD1C795153E6B6E0D90AB6
Firmware Osig: [PLDS    DG-16D4S        0225]
Firmware is:  SlimKey Extract                 
Auto-Loading firmware file C:\Users\michael\Desktop\JungleFlasher v0.1.92 Beta (304)\firmware\LTPlus-0225-v3.0.bin
MD5 hash:  1a38d3a2a6519339599fa1866642c513
Genuine LT plus v3.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS    DG-16D4S        0225]
Firmware is:  LT-Plus 3.0                     
Spoofing Target
DVD Key copied to target
Key Sector copied from Source to Target
Target is LT - ID strings not copied to Target


Getting Status from port 0x0000
SPi flash found with Status 0x72

Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
............
Flash Verification Test !
Reading Bank 0: Dump Failed
JF seems to freeze at that last part every time, now the drive is completely unresponsive and it won't get detected in JF unless i do an intro, i put it into the xbox and it just acts as if there isn't a drive connected. Any help would be very helpful!
 
M

mo175

Noob Account
Dec 6, 2011
3
0
doe1200 said:
when you unlock the drive to get spi status 0x00,do you flip the switch back to normal before you try to write to the pcb.
Click to expand...
Martin C said:
try locking and unlocking the SPI again.
Click to expand...

Still doesn't work :( when i flip the switch back to normal and then click write it freezes then fails to do anything, here is the log:
fyi i am using win7,usbpro and ck3i
Code: 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.92 Beta (304)
Session Started Tue Jul 24 18:09:52 2012

This is a Wow 64 process running on 2 x 64 bit CPUs 
X360USB PRO detected, Version 0.18

portio64.sys Driver not Installed 
Found 3 I/O Ports.
Found 0 Com Ports.
Found 4 windows drives C: D: E: F:
Found 1 CD/DVD drives D:

XECUTER X360USB PRO removed.

XECUTER X360USB PRO attached.

Sending Vendor Intro to port 0x0000
Status 0x80
Re-sending Vendor Intro: 
.....................................................
Serial flash found with Status 0x72

Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xC2
Device ID: 0x11
Flash Name:  MXIC(MX25L2005)
Flash Size:  262144 bytes
Loading firmware file C:\Users\michael\Desktop\Mathews SLim 0225 ORIG FW\second copy\Dummy.bin
MD5 hash:  f23b5842e4b66c61b7e23fb721880ea5
Inquiry string found
Identify string found
Drive key @ 0xA030 91675CA521CD1C795153E6B6E0D90AB6
Firmware Osig: [PLDS    DG-16D4S        0225]
Firmware is:  SlimKey Extract                 
Auto-Loading firmware file C:\Users\michael\Desktop\JungleFlasher v0.1.92 Beta (304)\firmware\LTPlus-0225-v3.0.bin
MD5 hash:  1a38d3a2a6519339599fa1866642c513
Genuine LT plus v3.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS    DG-16D4S        0225]
Firmware is:  LT-Plus 3.0                     
Spoofing Target
DVD Key copied to target
Key Sector copied from Source to Target
Target is LT - ID strings not copied to Target


Getting Status from port 0x0000
SPi flash found with Status 0x72

Sending Chip Erase to Port 0x0000
Writing target buffer to flash
Writing Bank 0: .
Getting Status from port 0x0000
Invalid Status 0x0
also when doing outro i get "no drive detected"
 
Last edited:
manwithoutname

manwithoutname

1
Jun 4, 2010
3,080
0
Resistor value should make no difference when the switch is set to normal. Test continuty with a multimeter between the 2 points with the switch meant to close, you should have 0ohm with the switch set to normal.
 
D

doe1200

VIP Member
Feb 21, 2011
460
48
northern ireland
its worth a try had one myself would unlock on 10 ohms,but would not write to the pcb,had to unlock at 20 ohms,and it wrote to the pcb,but also try what manwithoutname has said,also try when you get spi status 0x00 reintro to see if it stays at 0x00 status
 
Last edited:
You must log in or register to reply here.