02510C and Probe V2

[bytepusher]

Hi guys!

Is it possible to use a Probe V2 connected to a CK3 Pro to extract the key from a 02510C drive, originally a 83850 v1.

If yes, how should the settings/switches on the probe be set, to do so?
If not, i'll just get a Probe v3

Been using http://team-xecuter.com/forums/showthread.php?t=66257 as a reference, anything in this procedure I should change if using a V2?

Thanks in advance!

 

[rdubbs007]

You can make a PMT dvd power cable by putting a switch across pin 6 (3.3v) and use the probe 2.

 

[KILLorBE]

If you don't want to make one you can also buy a "Probe 1/2 PMT cable".

Even tho it's quite easy to make one, the PMT cable is longer (From "CK3" to drive, connector to probe is about the same), which to me is a plus.

 

[bytepusher]

Cool, i'll give it a go