LITEON DG-16D4S - SLIM 0272 LT+ 2.0

[carlnw1975]

Guys i`m at a total loss as to updating from 1.91 to 2.0. i`ve tried loading my dummy.bin file and then the LT 0272 2.0 f/w and then press into/device id and it comes back failed and i try lite on erase and i get firmware in target is not lite on.

here`s both jg.logs

intro/device ID log

JungleFlasher 0.1.88 Beta (280)
Session Started Tue Oct 11 19:31:41 2011

This is a 32 bit process running on 2 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 10 I/O Ports.
Found 1 Com Ports.
Found 4 windows drives A: C: D: F:
Found 2 CD/DVD drives D: F:

Loading firmware file C:\Documents and Settings\Carl\Desktop\XBR #58 Carl Wright\Dummy.bin
MD5 hash: e2c29ac35dcc89858b75c6f0b1cf9009
Inquiry string found
Identify string found
Drive key @ 0xA030 907A553375C07B0C0E959BFF848B8A90
Firmware Osig: [PLDS DG-16D4S 0272]
Firmware is: SlimKey Extract
Loading firmware file C:\Documents and Settings\Carl\Desktop\iXtreme_LT_Plus_2.0_SLIM_XBOX360-iND\IX_LT_Plus_2.0_SLIM\Firmware\LTPlus-0272-v2.0.bin
MD5 hash: e89c22ad8eecf634a3b27510901999c8
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D4S 0272]
Firmware is: LT-Plus 1.92
Spoofing Target
DVD Key copied to target
Key Sector copied from Source to Target
Target is LT - ID strings not copied to Target

Sending Vendor Intro to port 0x09F0
Status 0x51
Re-sending Vendor Intro:
.......................................................................................................................................................................................................................................................................
Device Intro failed!


lite on erease log

JungleFlasher 0.1.88 Beta (280)
Session Started Tue Oct 11 19:40:32 2011

This is a 32 bit process running on 2 x 32 bit CPUs
portio32.sys Driver Installed
portio32.sys Driver Started, thanks Schtrom !
Found 10 I/O Ports.
Found 1 Com Ports.
Found 4 windows drives A: C: D: F:
Found 2 CD/DVD drives D: F:

Loading firmware file C:\Documents and Settings\Carl\Desktop\XBR #58 Carl Wright\Dummy.bin
MD5 hash: e2c29ac35dcc89858b75c6f0b1cf9009
Inquiry string found
Identify string found
Drive key @ 0xA030 907A553375C07B0C0E959BFF848B8A90
Firmware Osig: [PLDS DG-16D4S 0272]
Firmware is: SlimKey Extract
Loading firmware file C:\Documents and Settings\Carl\Desktop\Latest_iXtreme_and_Stock_Firmware_Pack\Firmware\LTPlus-0272-v1.92.bin
MD5 hash: 26c9114d31ff459123fa8af7f50b93e3
Genuine LT plus v1.92
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D4S 0272]
Firmware is: LT-Plus 1.92
Spoofing Target
DVD Key copied to target
Key Sector copied from Source to Target
Target is LT - ID strings not copied to Target

Lite-On-Erase NOT sent


any help would be great!! :mad2::mad2::mad2::facepalm::facepalm:

 

[uron1000]

try using JF 0.1.89

 

[carlnw1975]

tried that, still had the same problem

 

[uron1000]

are you using X360usb pro? or via

 

[carlnw1975]

not using x360usb pro, i`m using xecuter ck3 lite

 

[demon2011]

Did you power cycle your drive when intro/cycle drive

 

[montana909sb]

the only way i can get slim drives to pick up on my comp is with the x360usb pro all phat drives work fine with on board sata

 

[carlnw1975]

yeah did power cycle my drive

 

[kukuku]

X360usb pro will help!!

 

[carlnw1975]

i was hoping my xecuter would do the job

 

[MightyShots]

If you used your current setup to flash LT1.91 then it should be fine, Is the 0x51 status changing when you power cycle? Like 0x51 to 0x80 etc?

 

[carlnw1975]

no, it stays at x51 and doesn`t enter vender mode, just says device intro failed

 

[MightyShots]

Sounds and looks like from the logs and answer that its not even being picked up by the pc, check the connections, make sure thats the correct sata address for the drive.

 

[carlnw1975]

right guys, a little update, i`ve managed to get the drive into vendor mod using ck3 lite, now i`m having trouble loading the LT+ 2.0 0272 slime cfw.
i load my dummy and then the 0272 2.0 as target. i then go over to mtk flash click lite on erase and i get firmware in target is not lite-on.
any ideas????