So i was flashing the brand new LT 2.0 slim on my 0401, successfully unlocked by kamikaze hack last week, intro'd the drive, no problem, unlock it with IPA, no problem.
Erase, and then when i was writing the firmware, when it was actually verifying i got this:
Flash Verification Test !
Reading Bank 0: Dump Failed
And now the drive doesn't shows up at all. Tried the usual mainboard port i use, tried VIA port (witch i never used btw so was a shot in the dark) and drive doesn't show at all. Doesn't eject either when i press the CK button.
Here's the full JF log:
JungleFlasher 0.1.88 Beta (280)
Session Started Sat Oct 08 22:28:57 2011
This is a Wow 64 process running on 2 x 64 bit CPUs
portio64.sys Driver Installed
portio64.sys Driver Started, thanks Schtrom !
Found 10 I/O Ports.
Found 1 Com Ports.
Found 5 windows drives C: D: E: F: H:
Found 2 CD/DVD drives E: H:
Drive is Slim Lite-On..
Key found in KeyDB at record (5 - -)
Key is: -
Key has been tested and verified, thanks C4eva !
Sending Vendor Intro to port 0x8880
Serial flash found with Status 0x72
Sending Device ID request to port 0x8880
Spi Status: 0x8C
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Sending Spi UnLock request to Port 0x8880
...................
Spi Status: 0x00
Loading firmware file C:\Users\Neverzinho\Desktop\Keys Drives X360\Minha_Trinity_Slim_4gb_Preta\Dummy.bin
MD5 hash: 4bada9a85953f88fe64862623b7a6793
Inquiry string found
Identify string found
Drive key @ 0xA030 -
Firmware Osig: [PLDS DG-16D4S 0401]
Firmware is: SlimKey Extract
Auto-Loading firmware file C:\Users\Neverzinho\Desktop\JungleFlasher v0.1.88 Beta (280)\firmware\LTPlus-0401-v1.92.bin
MD5 hash: 3128442eae48cb5f9ffb0ce9778a3bd0
Genuine LT plus v1.92
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D4S 0401]
Firmware is: LT-Plus 1.92
Spoofing Target
DVD Key copied to target
Key Sector copied from Source to Target
Target is LT - ID strings not copied to Target
Loading firmware file C:\Users\Neverzinho\Desktop\JungleFlasher v0.1.88 Beta (280)\firmware\LTPlus-0401-v2.0.bin
MD5 hash: 0270d5174a07385eeb313c8371b547f8
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D4S 0401]
Firmware is: LT-Plus 1.92
Spoofing Target
DVD Key copied to target
Key Sector copied from Source to Target
Target is LT - ID strings not copied to Target
Getting Status from port 0x8880
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x8880
Erasing:
Done !
Getting Status from port 0x8880
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x8880
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
............
Flash Verification Test !
Reading Bank 0: Dump Failed
Getting Status from port 0x8880
Invalid Status 0x0
Getting Status from port 0x8880
Invalid Status 0x0
Sending Vendor Outro to port 0x8880
What can i do?
