TEST 0x80 is the only code I can get

O

onlinebug

Full Member
Mar 28, 2007
64
0
I'm trying to flash my 0225 MXIC with the sputnik360 switch installed, the ohm is set to 10. I have managed to verify the key but when I intro the only status I can get is 0x80. Any help would be much appreciated.
 
O

onlinebug

Full Member
Mar 28, 2007
64
0
nastybrother24 said:
u need to turn off then on ur ck3 or what ever ur using for power to get it to 0x72
Click to expand...
CK3 Pro

So like this right on the MTK Flash 32 tab;

1. Normal mode
2. Press intro
3. Press 'yes'
4. Turn CK3 off then switch to unlock then turn CK3 on

I'm doing it like that, it's only giving me 0x80.
 
N

N.E.Modz

VIP Member
Sep 27, 2009
2,285
68
A.K.A daleh43
onlinebug said:
CK3 Pro

So like this right on the MTK Flash 32 tab;

1. Normal mode
2. Press intro
3. Press 'yes'
4. Turn CK3 off then switch to unlock then turn CK3 on

I'm doing it like that, it's only giving me 0x80.
Click to expand...
no, your trying to unlock and intro at the same time.

MTK tab > click intro > switch off/on ck3 within 1 sec > drive in vendor mode.
Then click spi box (below write, should say 0x08) > switch to unlock > spi box should say 0x00

come back and let us know what you have after this

dale:wink:
 
O

onlinebug

Full Member
Mar 28, 2007
64
0
daleh43 said:
no, your trying to unlock and intro at the same time.

MTK tab > click intro > switch off/on ck3 within 1 sec > drive in vendor mode.
Then click spi box (below write, should say 0x08) > switch to unlock > spi box should say 0x00

come back and let us know what you have after this

dale:wink:
Click to expand...
Doing that I only get 0x51 in normal mode when running the intro?
 
You must log in or register to reply here.