http://members.optusnet.com.au/mikeallison/xbox
These are the pics of my mod atm...
However, if i Disable the Chip it boots fine into the M$ Dash normally, if i turn it on, it powers down twice, then does nothing... No screen, no sound, nothing
I've tried Re-soldering the points twice now and it did nothing.
My console is a 1.6, and i've installed the d0 wire fine... the LED's are coming on, and also the blue LED on the chip, so i'm guessing d0 is fine...
Anyone had this Problem before? i've also tried Changing to Bank 1 and 2, and Disabling and Enabling Flash Protection... Nothing
Any help would be awsome Thanks
These are the pics of my mod atm...
However, if i Disable the Chip it boots fine into the M$ Dash normally, if i turn it on, it powers down twice, then does nothing... No screen, no sound, nothing
I've tried Re-soldering the points twice now and it did nothing.
My console is a 1.6, and i've installed the d0 wire fine... the LED's are coming on, and also the blue LED on the chip, so i'm guessing d0 is fine...
Anyone had this Problem before? i've also tried Changing to Bank 1 and 2, and Disabling and Enabling Flash Protection... Nothing
Any help would be awsome
Thanks