RGH 1 Bad Block!

[105tommy105]

Hi,

I have soldered in the LPT method to the console and dumped the NAND twice
both times i have received the Error Bad Block 327. Only 1 Bad Block, is it okay to use that NAND to flash it to RGH get DVD key then Flash [COLOR=#FF0000 !important]the original[/COLOR] (with the 1 bad block) back to the Xbox?

I put the NAND into jRunner and its said:
Bad Block ID @ 0x0327 [Offset: 0xD00E00]
Bad Block ID 0327 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0327 [Offset: 0xD00E00]
Bad Blocks Remapped

has that fixed the problem?, if so does it [COLOR=#FF0000 !important]auto[/COLOR] save?

 

[nofeloniesyet]

Hi,

I have soldered in the LPT method to the console and dumped the NAND twice
both times i have received the Error Bad Block 327. Only 1 Bad Block, is it okay to use that NAND to flash it to RGH get DVD key then Flash [COLOR=#FF0000 !important]the original[/COLOR] (with the 1 bad block) back to the Xbox?

I put the NAND into jRunner and its said:
Bad Block ID @ 0x0327 [Offset: 0xD00E00]
Bad Block ID 0327 Found @ 0x03FF [Offset: 0x107BE00]
Block ID 03FF [Offset: 0x107BE00] remapped to Block ID 0327 [Offset: 0xD00E00]
Bad Blocks Remapped

has that fixed the problem?, if so does it [COLOR=#FF0000 !important]auto[/COLOR] save?

as long as the nand dumps you got match your good to continue.

 

[stefanounick]

FFS, have you even bothered reading the userguide or the stickies here?

 

[Martin C]

FFS, have you even bothered reading the userguide or the stickies here?

You almost sound surprised.

Doesn't seem to matter how many hours we spend updating guides and writing documentation, there's always someone who can't do without a big spoon and bib.

OP - if you intend to carry on trying to complete this RGH, I suggest 2 things:

1. Right tools for the job. Ditch LPT immediately.
2. Read, read and read some more. I can guarantee everything you could possibly encounter has already been covered here.