LITEON DG-16D4S - SLIM 1071 with TX replacement PCB

shinobi974 · Nov 12, 2011

Hi, i update xbox from 12416 to 13604 with usb key.
I grab the key from JF, and flash the TX replacement with LT+2.0 1071. All get fine i lock the spi and switch hardawre lock.

I put it in drive. I try it without 250go hdd, i get drive open when i power on with controller. Xbox is open.

I verify point of drive R-G-Y-B-W with mulitmeter and all are fine.

Please help, i don't understand, Central led is "flashing" as a spotlight. As a bad key is in pcb. However JungleFlasher.0.1.89.Beta(284) says me key is verified.

nonogp · Nov 12, 2011

Can you post your jf.log ?

shinobi974 · Nov 12, 2011

I make a new dump and i erase and reflash.

JFlog:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

JungleFlasher 0.1.89 Beta (284)

Session Started Sat Nov 12 13:42:44 2011

This is a 32 bit process running on 2 x 32 bit CPUs

X360USB PRO detected, Version 0.18

Found 1 I/O Ports.

Found 2 Com Ports.

Found 3 windows drives A: C: D:

Found 1 CD/DVD drives D:

Drive is Lite-On..

Key found in KeyDB at record (13 - 2nd)

Key is: C94C7E22A29BB6F80C55009E4C81525E

Key has been tested and verified, thanks C4eva !

0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS

0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S

0020: 31 30 37 31 00 00 00 00 - 00 00 00 00 00 00 00 00 1071............

0030: 00 00 00 00 41 30 42 30 - 00 00 00 00 00 00 00 00 ....A0B0........

0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0060: 44 37 31 37 43 47 31 31 - 33 39 30 32 30 30 36 33 D717CG1139020063

0070: 36 20 20 20 6

Sending Vendor Intro to port 0x0000

Status 0x51

Re-sending Vendor Intro:

........

Serial flash found with Status 0x72

Sending Device ID request to port 0x0000

Manufacturer ID: 0xEF

Device ID: 0x11

Flash Name: Winbond/NEX(W25P20/NX25P20)

Flash Size: 262144 bytes

............

Key: C94C7E22A29BB6F80C55009E4C81525E is verified, Thanks C4eva

Grabbing Key sector: ................

Key Sector verified.

Grabbing Serial info: ........

Drive is Lite-On..

Key found in KeyDB at record (13 - 2nd)

Key is: C94C7E22A29BB6F80C55009E4C81525E

Key has been tested and verified, thanks C4eva !

Key data saved to C:\Users\Chris\Documents\Hack 360\ORIG Firmware\Frederic St-Paul\3rd\Key.bin

0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS

0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S

0020: 31 30 37 31 00 00 00 00 - 00 00 00 00 00 00 00 00 1071............

0030: 00 00 00 00 41 30 42 30 - 00 00 00 00 00 00 00 00 ....A0B0........

0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0060: 44 37 31 37 43 47 31 31 - 33 39 30 32 30 30 36 33 D717CG1139020063

0070: 36 20 20 20 6

Inquiry String saved to C:\Users\Chris\Documents\Hack 360\ORIG Firmware\Frederic St-Paul\3rd\Inquiry.bin

0000: C0 85 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0010: 00 00 00 00 37 44 37 31 - 47 43 31 31 39 33 32 30 ....7D71GC119320

0020: 30 30 33 36 20 36 20 20 - 00 00 00 00 00 00 30 31 0036 6 ......01

0030: 31 37 20 20 20 20 4C 50 - 53 44 20 20 20 20 47 44 17 LPSD GD

0040: 31 2D 44 36 53 34 20 20 - 20 20 20 20 20 20 00 00 1-D6S4 ..

0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0060: 00 00 00 0F 00 40 00 04 - 00 02 06 00 00 00 00 00 [email protected]

0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0080: 03 00 78 00 78 00 78 00 - 78 00 00 00 00 00 00 00 ..x.x.x.x.......

0090: 00 00 F8 00 10 02 00 00 - 02 02 00 00 60 00 40 00 ............`[email protected]

00A0: F8 00 10 02 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

00B0: 3F 20 00 00 ? ..

Identify String saved to C:\Users\Chris\Documents\Hack 360\ORIG Firmware\Frederic St-Paul\3rd\Identify.bin

0000: 44 37 31 37 43 47 31 31 - 33 39 30 32 30 30 36 33 D717CG1139020063

0010: 36 20 20 20 FF FF FF FF - 31 43 31 31 30 39 36 33 6 ....1C110963

0020: 31 36 30 38 35 58 58 52 - 41 30 FF FF 53 34 50 31 16085XXRA0..S4P1

0030: 33 32 38 30 30 30 30 30 - 30 31 39 38 30 32 00 00 32800000019802..

0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 42 30 FF FF ............B0..

Serial String saved to C:\Users\Chris\Documents\Hack 360\ORIG Firmware\Frederic St-Paul\3rd\Serial.bin

Hashing Drive: ................

Dummy.bin file saved to Dummy.bin

Loading firmware from buffer

Inquiry string found

Identify string found

Drive key @ 0xA030 C94C7E22A29BB6F80C55009E4C81525E

Firmware Osig: [PLDS DG-16D4S 1071]

Firmware is: SlimKey Extract

Key database updated

Loading firmware file C:\Users\Chris\Documents\Hack 360\xXx Firmware\xbins 360 Firmware\iXtreme_LTplus_v2.0_for_fat-slim_and_Stock_Firmware_Pack\Firmware\LTPlus-1071-v2.0.bin

MD5 hash: 2811f396793a42c2f284c4ac8f9c4dbc

Genuine LT plus v2.0

Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF

Firmware Osig: [PLDS DG-16D4S 1071]

Firmware is: LT-Plus 2.0

Spoofing Target

DVD Key copied to target

Key Sector copied from Source to Target

Target is LT - ID strings not copied to Target

Drive is Lite-On..

Key found in KeyDB at record (13 - 3rd)

Key is: C94C7E22A29BB6F80C55009E4C81525E

Key has been tested and verified, thanks C4eva !

Sending Vendor Intro to port 0x0000

Serial flash found with Status 0x72

Sending Device ID request to port 0x0000

Spi Status: 0x8C

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes

Sending Spi UnLock request to Port 0x0000

.

Spi Status: 0x00

Getting Status from port 0x0000

SPi flash found with Status 0x72

Sending Chip Erase to Port 0x0000

Erasing:

Blank Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Blank verified OK !

Getting Status from port 0x0000

SPi flash found with Status 0x72

Sending Chip Erase to Port 0x0000

Erasing:

Writing target buffer to flash

Writing Bank 0: ................

Writing Bank 1: ................

Writing Bank 2: ................

Writing Bank 3: ................

Flash Verification Test !

Reading Bank 0: ................

Reading Bank 1: ................

Reading Bank 2: ................

Reading Bank 3: ................

Write verified OK !

Sending Spi Lock request to Port 0x0000

Spi Status: 0x8C

Sending Vendor Outro to port 0x0000

Sending Vendor Outro to port 0x0000

Sending Vendor Intro to port 0x0000

Status 0x80

Re-sending Vendor Intro:

.........

Serial flash found with Status 0x72

Sending Device ID request to port 0x0000

Spi Status: 0x8C

Manufacturer ID: 0xC2

Device ID: 0x11

Flash Name: MXIC(MX25L2005)

Flash Size: 262144 bytes

Sending Vendor Outro to port 0x0000

Sending Vendor Outro to port 0x0000

Drive is Lite-On..

Key found in KeyDB at record (13 - 3rd)

Key is: C94C7E22A29BB6F80C55009E4C81525E

Key has been tested and verified, thanks C4eva !

zolaa7 · Nov 12, 2011

Hi the replacement pcb for some strange reason needs to outroed y i dont know had the same prob with it and outroed it 4 or 5 times.dont know if this will help is this the correct drive key for the slim machine?which board are you dumping the key from (origanal pcb)or (replacement pcb)??if it is flashing like a spot light it is not connected correctly check sata and power connector is put in the correct way.

shinobi974 · Nov 12, 2011

I updated from 12416 to 13604. I dump after original pcb.

zolaa7 · Nov 12, 2011

k i am going to what you have done update and check if it gives me the same problem

shinobi974 · Nov 12, 2011

I think it was a bad idea to update to 13604. I flash for third times. I power on the box with pad. It's fine, led central lightning correctly. I open tray with pad, after eject central led continue flashing, and when i close drive, it re-open alone...

zolaa7 · Nov 12, 2011

update is not a problem have 4 test machines will check one.

zolaa7 · Nov 12, 2011

sorry for the delay here is jf log after the update no problems with drive i have a slim 0225 drive.no problems when i put in machine.
JungleFlasher 0.1.89 Beta (284)
Session Started Sat Nov 12 12:48:43 2011
This is a 32 bit process running on 6 x 32 bit CPUs
X360USB PRO detected, Version 0.18
Found 1 I/O Ports.
Found 1 Com Ports.
Found 6 windows drives C: D: E: F: G: H:
Found 2 CD/DVD drives E: F:
Drive is Slim Lite-On..
Key found in KeyDB at record (2 - Desktop)
Key is: 2B2FF6EC90720A15AF477A47A3135BD0
Key has been tested and verified, thanks C4eva !

0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S
0020: 30 32 32 35 00 00 00 00 - 00 00 00 00 00 00 00 00 0225............
0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 44 37 31 34 43 47 30 34 - 31 38 30 31 30 30 36 58 D714CG041801006X
0070: 59 20 20 20 Y
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
........
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
............
Key: 2B2FF6EC90720A15AF477A47A3135BD0 is verified, Thanks C4eva
Grabbing Key sector: ................
Key Sector verified.
Grabbing Serial info: ........
Drive is Slim Lite-On..
Key found in KeyDB at record (2 - Desktop)
Key is: 2B2FF6EC90720A15AF477A47A3135BD0
Key has been tested and verified, thanks C4eva !
0000: 05 80 00 32 5B 00 00 00 - 50 4C 44 53 20 20 20 20 ...2[...PLDS
0010: 44 47 2D 31 36 44 34 53 - 20 20 20 20 20 20 20 20 DG-16D4S
0020: 30 32 32 35 00 00 00 00 - 00 00 00 00 00 00 00 00 0225............
0030: 00 00 00 00 41 30 41 30 - 00 00 00 00 00 00 00 00 ....A0A0........
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 44 37 31 34 43 47 30 34 - 31 38 30 31 30 30 36 58 D714CG041801006X
0070: 59 20 20 20 Y
0000: C0 85 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0010: 00 00 00 00 37 44 34 31 - 47 43 34 30 38 31 31 30 ....7D41GC408110
0020: 30 30 58 36 20 59 20 20 - 00 00 00 00 00 00 32 30 00X6 Y ......20
0030: 35 32 20 20 20 20 4C 50 - 53 44 20 20 20 20 47 44 52 LPSD GD
0040: 31 2D 44 36 53 34 20 20 - 20 20 20 20 20 20 00 00 1-D6S4 ..
0050: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0060: 00 00 00 0F 00 40 00 04 - 00 02 06 00 00 00 00 00 [email protected]
0070: 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0080: 03 00 78 00 78 00 78 00 - 78 00 00 00 00 00 00 00 ..x.x.x.x.......
0090: 00 00 F8 00 10 02 00 00 - 02 02 00 00 60 00 40 00 ............`[email protected]
00A0: F8 00 10 02 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00B0: 3F 20 00 00 ? ..
0000: 44 37 31 34 43 47 30 34 - 31 38 30 31 30 30 36 58 D714CG041801006X
0010: 59 20 20 20 FF FF FF FF - 30 49 31 32 30 37 33 32 Y ....0I120732
0020: 31 36 37 37 31 35 58 58 - 41 30 FF FF 53 34 50 30 167715XXA0..S4P0
0030: 41 30 38 30 30 30 30 30 - 30 35 35 35 38 34 00 00 A0800000055584..
0040: 00 00 00 00 00 00 00 00 - 00 00 00 00 41 30 FF FF ............A0..
Hashing Drive: ................
Dummy.bin file saved to Dummy.bin
Loading firmware from buffer
Inquiry string found
Identify string found
Drive key @ 0xA030 2B2FF6EC90720A15AF477A47A3135BD0
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: SlimKey Extract
Key database updated
Auto-Loading firmware file C:\Documents and Settings\Administrator\Desktop\JungleFlasher v0.1.89 Beta (284)\firmware\LTPlus-0225-v2.0.bin
MD5 hash: 1012021472620cad9adf1f838497668e
Genuine LT plus v2.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: LT-Plus 2.0
Spoofing Target
DVD Key copied to target
Key Sector copied from Source to Target
Target is LT - ID strings not copied to Target
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
.......
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Getting Status from port 0x0000
Serial flash found with Status 0x72
Reading Drive Key.
............
Authorised !
Grabbing sector 0x3E000.
................
Blank 3E000 sector detected!
Known f/w confirmed !
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
.......
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Updating flash for on-line dump.
Sending Sector Erase to Port 0x0000
Erasing: 0x3E000
Writing: 0x3E000
............
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Dumped in 4391mS
Restoring sector 0x3E000.
Sending Sector Erase to Port 0x0000
Erasing: 0x3E000
Writing: 0x3E000
............
Authorised !
................
Restore 0x3E000 verified !
Lite-On Dump file saved to Lite-OFW.bin
Loading firmware from buffer
Drive key @ n/a 2B2FF6EC90720A15AF477A47A3135BD0
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: LT-Plus 2.0
Key database updated
Auto-Loading firmware file C:\Documents and Settings\Administrator\Desktop\JungleFlasher v0.1.89 Beta (284)\firmware\LTPlus-0225-v2.0.bin
MD5 hash: 1012021472620cad9adf1f838497668e
Genuine LT plus v2.0
Drive key @ n/a FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Firmware Osig: [PLDS DG-16D4S 0225]
Firmware is: LT-Plus 2.0
Spoofing Target
DVD Key copied to target
Key Sector copied from Source to Target
Target is LT - ID strings not copied to Target
Drive is Slim Lite-On..
Key found in KeyDB at record (2 - test)
Key is: 2B2FF6EC90720A15AF477A47A3135BD0
Key has been tested and verified, thanks C4eva !
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
........
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Getting Status from port 0x0000
SPi flash found with Status 0x72
Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................
............
Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Dumped in 4468mS
Write verified OK !
Restoring sector 0x3E000.
Sending Sector Erase to Port 0x0000
Erasing: 0x3E000
Writing: 0x3E000
............
Authorised !
................
Restore verified OK !
Drive is Slim Lite-On..
Key found in KeyDB at record (2 - test)
Key is: 2B2FF6EC90720A15AF477A47A3135BD0
Key has been tested and verified, thanks C4eva !
Sending Vendor Intro to port 0x0000
Status 0x51
Re-sending Vendor Intro:
.......
Serial flash found with Status 0x72
Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name: Winbond/NEX(W25P20/NX25P20)
Flash Size: 262144 bytes
Sending Spi Lock request to Port 0x0000
Spi Status: 0x8C
Sending Vendor Outro to port 0x0000
Drive is Slim Lite-On..
Key found in KeyDB at record (2 - test)
Key is: 2B2FF6EC90720A15AF477A47A3135BD0
Key has been tested and verified, thanks C4eva !

alyshehata · Nov 12, 2011

if it opens alone, then ur 5 colored cables arent soldered right. check them again

shinobi974 · Nov 12, 2011

I flash a second pcb replacement now it's work fine, but i'm not sure the first have a problem, because i check cable again, and i unplug red and black and plug a new time. I can't test this because theses cable going to a motor.

Thanks for help.

shinobi974 · Nov 15, 2011

Hi, i get a new slim with 0401 drive. I used the first pcb replacement that i get problem with. Now i use it to this new slim, and drive won't open, central led flashing. I try it second times with CK3 pro, and eject didn't work too. I don't understand, flashing work fine. I test with multimeter to the original pcb linked to ck3 pro. I get 6/8v when i eject with ck3 pro beetwen red and black wire. When i do this to the TX pcb, multimeter stay at 0v.

Please, what can i do, i can't use SAV, i bought and stock this for 2 months.

Search

Search

LITEON DG-16D4S - SLIM 1071 with TX replacement PCB

shinobi974

nonogp

Senior Member

shinobi974

zolaa7

Full Member

shinobi974

zolaa7

Full Member

shinobi974

zolaa7

Full Member

zolaa7

Full Member

alyshehata

shinobi974

shinobi974