I think they are:rolleyes2:
DGX needed to obtain DVD keys for Hitachi and Liteon 1175 1532 drives.
Jungleflasher will be needed to flash replacement PCB once key is obtained
GENERAL 1175 Question.
- Thread starter xtg_ironzzz
- Start date
DGX needed to obtain DVD keys for Hitachi and Liteon 1175 1532 drives.
Jungleflasher will be needed to flash replacement PCB once key is obtained
no iam saying just to flash the dvd key with jungleflasherHow else do you expect to get the drive key?
It was mentioned a few weeks ago that RGH (or the DGX if your console is running dashboard version 15572 or above) would be required to obtain the drive key.
If you find a way to get the correct drive key from the drive, please let us know.
sorry guys
---------- Post added at 17:49 ---------- Previous post was at 17:44 ----------
sorry xt9_ironzzz
---------- Post added at 17:49 ---------- Previous post was at 17:44 ----------
sorry xt9_ironzzz
No worries, dude - learn something new everyday
So, am I right in saying
1.Install QSBs
2.Read NAND (Twice)
3.Write DGX to NAND
4.Install DGX
5.Get CPU/DVD Key
6.Remove DGX
7.Write Original NAND
8.Flash replacement PCB (when released) with LTU?
9.Away I go?
BL4K3Y
VIP Member
Nearly at the finish! whoo! lolBingo!
QSBs are entirely optional though
If QSBs are optional, how would I read the NAND?
Or could I skip the NAND reading and go straight to CPU/DVD Extracting?
Cheers
Edit: just remembered I can solder straight to the board for NAND reading (Still learning lol)
Last edited:
BL4K3Y
VIP Member
If you have a Trinity, Corona v1 or Corona v3, you can do a NAND-X/J-R Programmer wire install to read/write to the NAND.
If you have a Corona v2 or a Corona v4, you can install the Xecuter R/W kit to read/write to the NAND.
Last edited:
Awesome, I think I'm set!
Now to wait for the PCB and LTU to be released then full steam ahead!
Much appreciated all of you, thanks for the help.