RGH 14699 update f*** up

ball00

ball00

VIP Member
Nov 8, 2011
632
0
France
Love those happy endings!!
 
gargoyle67

gargoyle67

VIP Member
Feb 4, 2011
231
0
Someone really need to do a tut on the correct steps to update an already flashed\glitched system.
 
gargoyle67

gargoyle67

VIP Member
Feb 4, 2011
231
0
Oh, I rarely look on that section, Thanks, Prob a good idea to do with a sticky on this section or at least a link for lazy gits like me :p
 
Last edited:
N

neophyte5001

Senior Member
Nov 5, 2011
113
0
Missouri
gargoyle67 said:
Oh, I rarely look on that section, Thanks, Prob a good idea to do with a sticky on this section or at least a link for lazy gits like me :p
Click to expand...
Or maybe just update it to be more specific to RGH and this update, and sticky it here. When I RGH'd I didn't do anything with coolshrimps tool or freeboot, some simple steps are needed. Do you:

1) Flash original nand dump
2) Install official update
3) Use 360 Multi Builder 0.5 to create your new flash
4) Flash with rawflash v3

Is that the long and short of it? Is there a worry about fuses or CB update on phat models (jasper)?
 
Last edited:
F

faz2k2000

Senior Member
Nov 4, 2011
137
0
Bangladesh
ball00 said:
Love those happy endings!!
Click to expand...
With Xecuters there's always a happy ending !! :p

---------- Post added at 12:05 ---------- Previous post was at 12:04 ----------
neophyte5001 said:
Or maybe just update it to be more specific to RGH and this update, and sticky it here. When I RGH'd I didn't do anything with coolshrimps tool or freeboot, some simple steps are needed. Do you:

1) Flash original nand dump
2) Install official update
3) Use 360 Multi Builder 0.5 to create your new flash
4) Flash with rawflash v3

Is that the long and short of it? Is there a worry about fuses or CB update on phat models (jasper)?
Click to expand...
???
 
N

neophyte5001

Senior Member
Nov 5, 2011
113
0
Missouri
faz2k2000 said:
???
Click to expand...
What good does that do? If you don't know okay, if you need a clarifying question ask it.

I'll assume you didn't understand what I was trying to clarify myself which is this:

What are the EXACT steps one must take in order to go from the last dash (successfully glitched with RGH, everything working fine) to this NEW one?

While an RGH console does all the same things a JTAG console will, I see too often a blurring of the two methods. This TUT people keep throwing around is outdated, is JTAG-specific and involves freeboot, something with which I have had nothing to do.

I was merely suggesting that someone could modify said tut to be more RGH-specific, and sticky it to the RGH sub-forum.

Does that clarify things for you???

Not trying to be snide but if you're going to go to all the trouble to respond to someone, type more than three characters.

Edit: It looks like what I've been asking was right is what people have been doing; jumping the shark and flashing back to orig nand, installing official update, then flashing new nand image built with 360 multi-builder and having issues (or worse, installing official update from glitched dash) when what it looks like is needed is:

1) Flash new nand image created with 360 multi builder with rawflash v3 (or whatever you want to use)
2) add extra $ to systemupdate to install over USB - which actually just installs new avatar data

If it was THIS simple, it got lost in all the threads by someone who f**ked up and did it wrong

That's why it's SO important to ASK!
 
Last edited:
T

talby71

VIP Member
Nov 24, 2010
3,463
0
Near Melbourne , Australia
neophyte5001 said:
What good does that do? If you don't know okay, if you need a clarifying question ask it.

I'll assume you didn't understand what I was trying to clarify myself which is this:

What are the EXACT steps one must take in order to go from the last dash (successfully glitched with RGH, everything working fine) to this NEW one?

While an RGH console does all the same things a JTAG console will, I see too often a blurring of the two methods. This TUT people keep throwing around is outdated, is JTAG-specific and involves freeboot, something with which I have had nothing to do.

I was merely suggesting that someone could modify said tut to be more RGH-specific, and sticky it to the RGH sub-forum.

Does that clarify things for you???

Not trying to be snide but if you're going to go to all the trouble to respond to someone, type more than three characters.

Edit: It looks like what I've been asking was right is what people have been doing; jumping the shark and flashing back to orig nand, installing official update, then flashing new nand image built with 360 multi-builder and having issues (or worse, installing official update from glitched dash) when what it looks like is needed is:

1) Flash new nand image created with 360 multi builder with rawflash v3 (or whatever you want to use)
2) add extra $ to systemupdate to install over USB - which actually just installs new avatar data

If it was THIS simple, it got lost in all the threads by someone who f**ked up and did it wrong

That's why it's SO important to ASK!
Click to expand...
dont worry bout them, they're just post boosting !!!
 
gargoyle67

gargoyle67

VIP Member
Feb 4, 2011
231
0
neophyte5001 said:
What good does that do? If you don't know okay, if you need a clarifying question ask it.

I'll assume you didn't understand what I was trying to clarify myself which is this:

What are the EXACT steps one must take in order to go from the last dash (successfully glitched with RGH, everything working fine) to this NEW one?

While an RGH console does all the same things a JTAG console will, I see too often a blurring of the two methods. This TUT people keep throwing around is outdated, is JTAG-specific and involves freeboot, something with which I have had nothing to do.

I was merely suggesting that someone could modify said tut to be more RGH-specific, and sticky it to the RGH sub-forum.

Does that clarify things for you???

Not trying to be snide but if you're going to go to all the trouble to respond to someone, type more than three characters.

Edit: It looks like what I've been asking was right is what people have been doing; jumping the shark and flashing back to orig nand, installing official update, then flashing new nand image built with 360 multi-builder and having issues (or worse, installing official update from glitched dash) when what it looks like is needed is:

1) Flash new nand image created with 360 multi builder with rawflash v3 (or whatever you want to use)
2) add extra $ to systemupdate to install over USB - which actually just installs new avatar data

If it was THIS simple, it got lost in all the threads by someone who f**ked up and did it wrong

That's why it's SO important to ASK!
Click to expand...
That's what I was sort of trying to say, Thanks for clarifying
 
G

gregandrebeca

Noob Account
Sep 1, 2011
4
0
Im new to all of this but I think I did the same thing I updated via flash360 based off a build from multibuilder when the console turned on it said update xbox live so I did then I noticed that it was not booting my xex menu, so I reflashed it with the nand that I created I never dumped the 14699 dash that was stock, the system is working with 14699 but it is not jtagged I do have a coolrunner what can I do to get it back to jtagged?
 
B

bandit123

VIP Member
Jul 4, 2010
1,517
68
(UK)
gregandrebeca said:
Im new to all of this but I think I did the same thing I updated via flash360 based off a build from multibuilder when the console turned on it said update xbox live so I did then I noticed that it was not booting my xex menu, so I reflashed it with the nand that I created I never dumped the 14699 dash that was stock, the system is working with 14699 but it is not jtagged I do have a coolrunner what can I do to get it back to jtagged?
Click to expand...
Maybe if u made 1 post and didnt hijack u might get an answer ????
 
You must log in or register to reply here.