16d4s 0225 Liteon problem

ExBoxHax

ExBoxHax

Senior Member
Jul 5, 2013
129
0
USA
I have a trinity with a 16d4s liteon 0225. I don't have an original firmware dump and need to build a firmware from the files. Problem is, I only see the LTU firmware for the 16d5s...are there two separate firmwares for each drive revision? I keep getting the "this is not liteon firmware" error message when I try to write.
 
skillet34

skillet34

VIP Member
Jun 21, 2012
1,067
68
MA USA
you will need LTU2 0225 if you are using LTU2 ,do you have the latest FW pack? Or are you using a replacement pcb 1.1 /or ltu1 etc?
 
Last edited:
skillet34

skillet34

VIP Member
Jun 21, 2012
1,067
68
MA USA
Then you need LTU2 0225 You have a dummy bin? drive key etc already or nothing at all?
 
Last edited:
ExBoxHax

ExBoxHax

Senior Member
Jul 5, 2013
129
0
USA
Ok I got the firmware built successfully with LTU2 0225 and it flashed to the pcb but now I keep getting open tray errors and I know it's not the laser because I tried a brand new drive and it still does it.
 
ExBoxHax

ExBoxHax

Senior Member
Jul 5, 2013
129
0
USA
Code: 
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
JungleFlasher 0.1.96 Beta (323)
Session Started Sat Sep 28 15:31:51 2013


This is a 32 bit process running on 2 x 32 bit CPUs 
X360USB PRO detected, Version 0.18


portio32.sys Driver Installed 
portio32.sys Driver Started, thanks Schtrom ! 
Found 1 I/O Ports.
Found 0 Com Ports.
Found 2 windows drives C: D:
Found 0 CD/DVD drives


XECUTER X360USB PRO removed.


XECUTER X360USB PRO attached.


Sending Vendor Intro to port 0x0000
Status 0x80
Re-sending Vendor Intro: 
...................................
Serial flash found with Status 0x72


Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name:  Winbond/NEX(W25P20/NX25P20)
Flash Size:  262144 bytes
Loading firmware file C:\Users\Korrine\Downloads\JungleFlasher v0.1.96 Beta (323)\firmware\ltucfw.bin
MD5 hash:  c51b79377d3fade31ad8cc590fada0ad
Drive key @ 0x1EFF0 4E94DCA0FFC01BAAEC35128C46CF7156
Firmware Osig: [PLDS    DG-16D4S        0225]
Firmware is:  LTU v1.0                        


Getting Status from port 0x0000
SPi flash found with Status 0x72
XECUTER X360USB PRO removed.


XECUTER X360USB PRO attached.


Loading firmware file C:\Users\Korrine\Downloads\JungleFlasher v0.1.96 Beta (323)\firmware\ltu2cfw.bin
MD5 hash:  76f194e5ce0a99137458cb9b321344b8
Drive key @ n/a 4E94DCA0FFC01BAAEC35128C46CF7156
Firmware Osig: [PLDS    DG-16D4S        0225]
Firmware is:  LTU2 v1.0                       
Sending Vendor Intro to port 0x0000
Status 0x80
Re-sending Vendor Intro: 
................................
Serial flash found with Status 0x72


Sending Device ID request to port 0x0000
Spi Status: 0x00
Manufacturer ID: 0xEF
Device ID: 0x11
Flash Name:  Winbond/NEX(W25P20/NX25P20)
Flash Size:  262144 bytes


Getting Status from port 0x0000
SPi flash found with Status 0x72


Sending Chip Erase to Port 0x0000
Erasing:
Writing target buffer to flash
Writing Bank 0: ................
Writing Bank 1: ................
Writing Bank 2: ................
Writing Bank 3: ................


Flash Verification Test !
Reading Bank 0: ................
Reading Bank 1: ................
Reading Bank 2: ................
Reading Bank 3: ................
Write verified OK !


Sending Vendor Outro to port 0x0000
Drive is Slim Lite-On.. 
XECUTER X360USB PRO removed.
 
ExBoxHax

ExBoxHax

Senior Member
Jul 5, 2013
129
0
USA
aha good call...derp da derp...still learning this ltu stuff there's so many different boards and firmwares. :crazy:
 
skillet34

skillet34

VIP Member
Jun 21, 2012
1,067
68
MA USA
Did you lock spi when you where done? That would not cause your issue but was curious did not see it in the log. last spi staus was 0x00
 
ExBoxHax

ExBoxHax

Senior Member
Jul 5, 2013
129
0
USA
yea I locked it this time around I was a bit unsure on whether to lock it or not on the first pass. good to go now thanks fellas
 
You must log in or register to reply here.