RGH 16mb jasper wont glitch

[finnishflash]

Hi,
I have a 16mb jasper that wont glitch.
When its trying to glitch the red light stays on and the green light blinks for maybe half a second every five seconds as i think is normal?
The strange thing is that sometimes the green light stays on for maybe 2 seconds.
Is this normal?
Im starting to think that it is a succesful glitch but there is something wrong with the nand.

 

[Hackerjac]

post some hq pic of your soldering

 

[finnishflash]

Here are some pictures of the soldering.
View attachment 5884
View attachment 5885
View attachment 5886
View attachment 5887

ive also tried a 100nf cap on ground and A.
And 100nf cap inline on D pad.
Dont have a 68nf, but should get some in a couple of days.

 

[Martin C]

CPU_PLL_BYPASS looks a little 'dry'.

Just a suggestion that ALL people installing CRs - did you KNOW that your console should still boot with the CR enabled and your original NAND in place? It's the best way to check your wiring without messing about with the data on the NAND.

 

[finnishflash]

I tried to build the ecc image with jtag tool instead of multibuilder and now it works.
Glitches instantly.
Really strange, maybe something is wrong with multibuilder.
Thanks for the help.

 

[viper0831]

CPU_PLL_BYPASS looks a little 'dry'.

Just a suggestion that ALL people installing CRs - did you KNOW that your console should still boot with the CR enabled and your original NAND in place? It's the best way to check your wiring without messing about with the data on the NAND.

Martin are you saying that if it boots with the cr on with the orig nand that the chip and soldering are functioning just fine?

 

[Martin C]

Martin are you saying that if it boots with the cr on with the orig nand that the chip and soldering are functioning just fine?

Not completely. If you get a green flash on the CR and the console then boots (longer on a slim of course), then yes - the CR and wiring are all doing their job.


Sent from my iPad using Tapatalk.

 

[sick360mods]

Good thing to know

sent from HTC EVO sick360mods.com

 

[Martin C]

I tried to build the ecc image with jtag tool instead of multibuilder and now it works.
Glitches instantly.
Really strange, maybe something is wrong with multibuilder.
Thanks for the help.

Maybe something wrong with your process or maybe you flashed the wrong image to it? Very much doubt it's a problem with Multi_builder TBH.

 

[keil423]

How about a pic of wire routing. There are points on the mobo that cause interference. Infact if the wires come to close to some points it will cause the green led to stay lite up.